Determination of Vibroacoustic Parameters of Polyurethane Mats for Residential Building Purposes

This paper is aimed at investigating the use of polyurethane mats, usually used as ballast mats, for residential building purposes. Ballast mats have features that may improve the vibroacoustic comfort in residential rooms. Their strength is certainly an advantage, along with vibration and acoustic insulation. However, the problem that an engineer has to deal with, for example in modeling these types of mats, is a limited knowledge of the material’s vibroacoustic parameters. Knowledge of these may be useful for residential buildings. This paper presents measurements of the vibroacoustic parameters of polyurethane mats, together with a suitable methodology and some results and analysis. The two main material parameters responsible for vibroacoustic protection were measured: the dynamic stiffness, which is related to the acoustic properties of the material, and the critical damping coefficient, which is obviously responsible for damping. The measurement methodology is clearly described. A total of five polyurethane materials with different densities were tested. It was possible to identify a relationship between the material density and the vibroacoustic parameters, which could offer an indication of which material to use, depending on the stimulus affecting a human in a given location.

Radiant Conditioning Retrofitting for Residential Buildings

In order to achieve Australia’s greenhouse gas emissions reduction targets, a majority of the existing residential building stock in Australia will require retrofitting in favour of energy-efficient solutions. This paper considers retrofitting for conditioning to be one of the most straightforward and offers the greatest potential to deliver significant comfort and energy-saving results. Radiant conditioning systems are not new, yet some game-changing innovations have taken place over the last decade that may require an entire paradigm shift in the manner we condition our buildings. The reiteration of the principle ‘thermally active systems’ suggests that our buildings need to accommodate these systems into the fabric of building components. However, extremely few products and/or innovative solutions for doing such seem to be provided by the industry. We seem incompetent with solutions that are not costing the Earth, insulating, lightweight, and offering an instant response time to conditioning. We still have the concept embedded in our minds that radiative systems consist of heavy ‘combat’ construction with time lags of a day or two and that they are very costly to implement, especially if we are to retrofit a project. The purpose of this paper is to rectify and change our understanding of radiant systems, namely through a review of the existing technology and its recent advancements. It intends to introduce the fact that radiant systems can become highly reactive, responsive, and thermally dynamic conditioning systems. Lightweight radiant systems can be 40% more energy-efficient than common air conditioners and can respond in less than 15 min rather than in the hours required of heavy radiant systems. Thus, an insulated, lightweight radiant system is ideal for retrofitting residential buildings. Furthermore, this paper supports and introduces various systems suited to retrofitting a residential building with hydronic radiant systems.

Cascade control of «smart home» heating

The article discusses the issues of implementing the conversion of input signals of «smart» sensors for automation of the heating system, an algorithm for calculating the parameters of measuring circuits with a nonlinear element and an operational amplifier is developed. The issues of modeling cascade control of residential building heating systems are investigated. The results of the analysis and selection of parameters of the cascade control system are presented. An algorithm implementing the operation of a virtual object is given. The structures of management of residential building objects are proposed. The method of calculating the adjustment of the controller for cascade control is given. For the heating system stand, the procedure for setting the parameters of the process of PID control of the coolant temperature is considered. The results confirming the achievability of the proposed structural changes are obtained. The results of experimental studies are presented.

Destruction Feature Extraction of Prefabricated Residential Building Components Based on BIM

In order to improve the damage feature extraction effect of prefabricated residential building components and improve the structural stability of prefabricated residential components, this paper applies BIM technology to the structural feature analysis of prefabricated residential components. Moreover, this paper adopts the simple superposition method and combines the first strength theory of material mechanics to derive the formula for calculating the cracking torque of prefabricated residential building components under compound torsion. In addition, based on the variable-angle space truss model, this paper uses a simple superposition method to derive the calculation formula for the ultimate torque of composite torsion of fabricated residential building components and applies it to the BIM fabricated residential model. Finally, this paper constructs an intelligent BIM prefabricated residential building construction damage characteristic monitoring system. Through experimental research, it can be seen that the intelligent BIM prefabricated residential building construction damage feature monitoring system proposed in this paper can monitor the damage characteristics of prefabricated residential building construction and can predict the evolution of subsequent building features.

Comparison of the Embodied Carbon Emissions and Direct Construction Costs for Modular and Conventional Residential Buildings in South Korea

Modular construction is an innovative new construction method that minimizes waste and improves efficiency within the construction industry. However, practitioners are hampered by the lack of environmental and economic sustainability analysis methods in this area. This study analyzes the embodied carbon emissions and direct construction costs incurred during the production phase of a modular residential building and provides comparison to an equivalent conventional residential building. Major drawings and design details for a modular residential building in South Korea were obtained, and the quantity take-off data for the major construction materials were analyzed for a modular construction method and a conventional construction method using a reinforced concrete structure under the same conditions. Focusing on major construction materials during the production phase, the embodied carbon emissions assessment revealed that adopting a modular construction approach reduced the environmental impact by approximately 36%, as compared to the conventional reinforced concrete method. However, in terms of the direct construction cost, the modular construction was approximately 8% more expensive than the conventional reinforced concrete construction method.

Climate Adaptation and Indoor Comfort Improvement Strategies for Buildings in High-Cold Regions: Empirical Study from Ganzi Region, China

The improvement of building and living conditions in high-cold areas has always been an issue worthy of attention, but there is currently no research using field survey data for evaluation. The Ganzi region, based in the western plateau of China, is a typical example for such a study. Restricted by factors such as natural conditions and economic level, the winter indoor thermal environment of western plateau houses is generally poor. Taking the new residential houses in the Ganzi region as a case study, the authors of this paper conducted field research and analyses. First, the authors analyzed the construction technology and functional layout of the building through thermal environment testing and investigation; second, the authors analyzed the user’s activity path according to the production and lifestyle; thirdly, the authors comprehensively evaluated the indoor thermal comfort through questionnaires and a predicated mean vote (PMV)-predicted percentage dissatisfied (PPD) evaluation model. The research results showed that: (1) the construction technology, functional layout, and temperature distribution of the new residential building were consistent with the user’s activity path, which could effectively improve thermal insulation ability and thermal comfort; (2) compared to the developed eastern regions, the users in the building showed a stronger tolerance and wider acceptable temperature range in the extreme climate environment; and (3) under certain cooperative work conditions, an indoor temperature of 10–14 °C could meet basic thermal environment requirements and thus lower the limits of the standards. The author’s method was proven to be more resilient than current standards in dealing with climate change. Therefore, this research can provide a practical reference for the improvement of peoples’ living conditions and sustainable development in cold regions and other harsh areas.

Water Consumption and Environmental Impact of Multifamily Residential Buildings: A Life Cycle Assessment Study

Water use in buildings accounts for a large share in global freshwater consumption where research on the impacts of life cycle water use receive little or no attention. Moreover, there is very limited knowledge regarding such impacts that focus on the life cycle emissions from water consumption in building environments in the world’s most water-stressed countries. Hence, this study attempted to quantify the environmental impacts of operational water use in a multi-family residential building through a life cycle assessment (LCA). A small part of a Middle Eastern country, Doha (Qatar), has been selected for the primary assessment, while water-use impact in Miami (Florida) was chosen as a second case study, as both locations fall into similar climate zone according to ASHRAE Climate Zone Map. The LCA score indicated much higher impacts in the Doha case study compared to Miami. The variation in the result is mainly attributed to the raw water treatment stage in Doha, which involves energy-intensive thermal desalination. Again, relative comparison of the annual water and electricity use impacts for the modeled building was performed at the final stage for both locations. Water use was attributable for 18% of the environmental impacts in Miami, while this value increased to 35% in Doha. This initial assembled LCA result will be beneficial to both water authorities and building research communities in establishing more sustainable water use policies for specific regions/countries that will ultimately benefit the overall building environment.