A 1.55 μW Bio-Impedance Measurement System for Implantable Cardiac Pacemakers in 0.18 μm CMOS

2018 ◽  
Vol 12 (1) ◽  
pp. 211-221 ◽  
Author(s):  
Milad Zamani ◽  
Yasser Rezaeiyan ◽  
Omid Shoaei ◽  
Wouter A. Serdijn
2021 ◽  
Vol 7 (2) ◽  
pp. 496-499
Author(s):  
Stadler B. Eng. Sebastian ◽  
Herbert Plischke ◽  
Christian Hanshans

Abstract Bioimpedance analysis is a label-free and easy approach to obtain information on cellular barrier integrity and cell viability more broadly. In this work, we introduce a small, low-cost, portable in vitro impedance measurement system for studies where a shadow-free exposure of the cells is a requirement. It can be controlled by a user-friendly web interface and can perform measurements automated and autonomously at short intervals. The system can be integrated into an existing IoT network for remote monitoring and indepth analyses. A single-board computer (SBC) serves as the central unit, to control, analyze, store and forward the measurement data from the single-chip impedance analyzer. Various materials and manufacturing methods were used to produce a purpose-built lid on top of a modified 24-well microtiter plate in a “do it yourself” fashion. Furthermore, three different sensor designs were developed utilizing anodic aluminum oxide (AAO) membranes and gold-plated electrodes. Preliminary tests with potassium chloride (KCl) showed first promising results.


2013 ◽  
Vol 4 (1) ◽  
pp. 75-79
Author(s):  
Dr Aktharuzzaman ◽  
Tanvir N Baig ◽  
K Siddique-e Rabbani

Designing of electronic circuitry and development of necessary software has been performed in the present work for a microcontroller based 4-electrode Focused Impedance measurement system. This needs a complex sequential analog switching of constant current ac signal generator and a potential measuring unit to 4 electrodes on the object under study. The performances of the designed system and the developed microcontroller software have been studied using a commercially available simulation software, ‘Proteus-7’, and the results are very satisfactory. DOI: http://dx.doi.org/10.3329/bjmp.v4i1.14690 Bangladesh Journal of Medical Physics Vol.4 No.1 2011 75-79


Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4933 ◽  
Author(s):  
Zbigniew Marszalek ◽  
Krzysztof Duda

This paper describes the design and the performance of simultaneous, multifrequency impedance measurement system for four inductive-loop (IL) sensors which have been developed for vehicle parameters measurement based on vehicle magnetic profile (VMP) analysis. Simultaneous impedance measurement on several excitation frequencies increases the VMP measurement reliability because typical electromagnetic interferences (EMI) are narrowband, and should not simultaneously affect, in the same way, all measurement bands that are spread in the frequency, i.e., it is expected that at least one measurement band is disturbance-free. The system consists of two standard and two slim IL sensors, specially designed and installed, the analogue front-end, and an industrial computer with digital-to-analogue and analogue-to-digital converters accessed via field-programmable gate array (FPGA). The impedance of the IL sensors is obtained by vector measurement of voltages from auto-balancing bridge (ABB) front-end. Complex voltages are demodulated from excitation frequencies with FIR filters designed with the flat-top windows. The system is capable of delivering VMPs in real-time mode, and also storing voltages for off-line postprocessing and analysis. Field distributions and sensitivities of slim and standard IL sensors are also discussed. Field test confirmed assumed increased reliability of VMP measurement for proposed simultaneous multifrequency operational mode.


Sign in / Sign up

Export Citation Format

Share Document