Characterization of PZT thin film transducers obtained by pulsed laser deposition

Author(s):  
P. Verardi ◽  
F. Craciun ◽  
M. Dinescu
2006 ◽  
Vol 89 (18) ◽  
pp. 182906 ◽  
Author(s):  
Sang-A Lee ◽  
Jae-Yeol Hwang ◽  
Jong-Pil Kim ◽  
Se-Young Jeong ◽  
Chae-Ryong Cho

2000 ◽  
Vol 655 ◽  
Author(s):  
Masanori Okuyama ◽  
Toshiyuki Nakaiso ◽  
Minoru Noda

AbstractSr2(Ta1划x, Nbx)2O7(STN) ferroelectric thin films have been prepared on SiO2/Si(100) substrates by the pulsed laser deposition (PLD) method. Preferential (110) and (151)-oriented STN thin films are deposited at a low temperature of 600°C in N2O ambient gas at 0.08 Torr. A counterclockwise C-V hysteresis was observed in the metal-ferroelectric-insulator-semiconductor (MFIS) structure using Sr2(Ta0.7, Nb0.3)2O7 on SiO2/Si deposited at 600°C. Memory window in the C-V curve spreads symmetrically towards both positive and negative directions when applied voltage increases and the window does not change in sweep rates ranging from 0.1 to 4.0×103 V/s. The C-V curve of the MFIS structure does not degrade after 1010 cycles of polarization reversal. The gate retention time is about 3.0×103 sec when the voltages and time of write pulse are ±15V and 1.0 sec, respectively, and hold bias was -0.5 V.


2011 ◽  
Vol 59 (3(1)) ◽  
pp. 2537-2541 ◽  
Author(s):  
Jungmin Park ◽  
Fumiya Gotoda ◽  
Seiji Nakashima ◽  
Takeshi Kanashima ◽  
Masanori Okuyama

Author(s):  
F.K. Shan ◽  
G.X. Liu ◽  
Byoung Chul Shin ◽  
Won Jae Lee ◽  
W.T. Oh

2006 ◽  
Vol 24 (4) ◽  
pp. 1623-1626 ◽  
Author(s):  
Artur Erlacher ◽  
Alejandra R. Lukaszew ◽  
Herbert Jaeger ◽  
Bruno Ullrich

2013 ◽  
Vol 860-863 ◽  
pp. 807-811
Author(s):  
Wen De Liu ◽  
Zhen Feng Kang ◽  
Qiang Li ◽  
Ping Ping Zheng ◽  
Tie Zhu Ding

This study is focused on the elaboration of 8 mol.% yttria stabilized zirconia (YSZ) thin films onto porous supporting NiOYSZ anode substrates using pulsed laser deposition (PLD),and their microstructural and electrical characterizations. Better crystallinity and grain connectivity is observed increasing the deposition temperature until best values are obtained at 500°C. The greater relative conductivity enhancement is found at 300-500°C. The observed an increased conductivity at lower temperatures may be caused by a combination of nanoscaled effect of the YSZ thin film and interfacial effects between YSZ thin film and substrate.


Sign in / Sign up

Export Citation Format

Share Document