Laminar Natural Convection From Isothermal Vertical Cylinders: Revisting a Classical Subject

2013 ◽  
Vol 135 (2) ◽  
Author(s):  
Jerod C. Day ◽  
Matthew K. Zemler ◽  
Matthew J. Traum ◽  
Sandra K. S. Boetcher
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Convection Heat Transfer ◽  
Vertical Cylinder ◽  
Vertical Surface ◽  
Nusselt Numbers ◽  
Recent Interest ◽  
Laminar Natural Convection ◽  
Vertical Cylinders ◽  
Classical Subject

Although an extensively studied classical subject, laminar natural convection heat transfer from the vertical surface of a cylinder has generated some recent interest in the literature. In this investigation, numerical experiments are performed to determine average Nusselt numbers for isothermal vertical cylinders (102<RaL<109,0.1<L/D<10, and Pr = 0.7) situated on an adiabatic surface in a quiescent ambient environment. Average Nusselt numbers for various cases will be presented and compared with commonly used correlations. Using Nusselt numbers for isothermal tops to approximate Nusselt numbers for heated tops will also be examined. Furthermore, the limit for which the heat transfer results for a vertical flat plate may be used as an approximation for the heat transfer from a vertical cylinder will be investigated.

Laminar Natural Convection From Isothermal Vertical Cylinders: A Revisit to a Classical Subject

2011 ◽  
Author(s):  
Jerod C. Day ◽  
Matthew J. Traum ◽  
Sandra K. S. Boetcher
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Convection Heat Transfer ◽  
Vertical Cylinder ◽  
Vertical Surface ◽  
Nusselt Numbers ◽  
Laminar Natural Convection ◽  
Nusselt Number Correlation ◽  
Vertical Cylinders ◽  
Classical Subject

Laminar natural convection heat transfer from the vertical surface of a cylinder is a classical subject, which has been studied extensively. Furthermore, this subject has generated some recent interest in the literature. In the present investigation, numerical experiments were performed to determine average Nusselt numbers for isothermal vertical cylinders (103 < RaL < 109, 0.5 < L/D <10, and Pr = 0.7) situated on an adiabatic surface in a quiescent ambient environment which will allow for plume growth. Results will be compared with commonly used correlations and a new average Nusselt number correlation will be presented. Furthermore, the limit for which the heat transfer results for a vertical flat plate may be used as an approximation for the heat transfer from a vertical cylinder will be investigated.

Laminar Natural Convection Heat Transfer From Vertical 7 × 7 Rod Bundles in Liquid Sodium

2019 ◽  
Vol 5 (2) ◽  
Author(s):  
Koichi Hata ◽  
Katsuya Fukuda ◽  
Tohru Mizuuchi
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Convection Heat Transfer ◽  
Liquid Sodium ◽  
Natural Convection Heat Transfer ◽  
Convection Heat ◽  
Rod Bundles ◽  
Nusselt Numbers ◽  
Rod Bundle ◽  
Laminar Natural Convection

Laminar natural convection heat transfer from vertical 7 × 7 rod bundle in liquid sodium was numerically analyzed to optimize the thermal–hydraulic design for the bundle geometry with equilateral square array (ESA). The unsteady laminar three-dimensional basic equations for natural convection heat transfer caused by a step heat flux were numerically solved until the solution reaches a steady-state. The code of the parabolic hyperbolic or elliptic numerical integration code series (PHOENICS) was used for the calculation considering the temperature dependence of thermophysical properties concerned. The 7 × 7 heated rods for diameter (D = 0.0076 m), length (L = 0.2 m) and L/D (=26.32) were used in this work. The surface heat fluxes for each cylinder, which was uniformly heated along the length, were equally given for a modified Rayleigh number, (Raf,L)ij and (Raf,L)Nx×Ny,S/D, ranging from 3.08 × 104 to 4.28 × 107 (q = 1 × 104∼7 × 106 W/m2) in liquid temperature (TL = 673.15 K). The values of ratio of the diagonal center-line distance between rods for bundle geometry to the rod diameter (S/D) for vertical 7 × 7 rod bundle were ranged from 1.8 to 6 on the bundle geometry with ESA. The spatial distribution of average Nusselt numbers for a vertical single cylinder of a rod bundle, (Nuav)ij, and average Nusselt numbers for a vertical rod bundle, (Nuav,B)Nx×Ny,S/D, were clarified. The average values of Nusselt number, (Nuav)ij and (Nuav,B)Nx×Ny,S/D, for the bundle geometry with various values of S/D were calculated to examine the effect of array size, bundle geometry, S/D, (Raf,L)ij and (Raf,L)Nx×Ny,S/D on heat transfer. The bundle geometry for the higher (Nuav,B)Nx×Ny,S/D value under the condition of S/D = constant was examined. The general correlations for natural convection heat transfer from a vertical Nx×Ny rod bundle with the ESA and equilateral triangle array (ETA), including the effects of array size, (Raf,L)Nx×Ny,S/D and S/D were derived. The correlations for vertical Nx×Ny rod bundles can describe the theoretical values of (Nuav,B)Nx×Ny,S/D for each bundle geometry in the wide analytical range of S/D (=1.8–6) and the modified Rayleigh number ((Raf,L)Nx×Ny,S/D = 3.08 × 104 to 4.28 × 107) within −9.49 to 10.6% differences.

Laminar Natural Convection Heat Transfer in a Differentially Heated Square Cavity Due to a Thin Fin on the Hot Wall

2003 ◽  
Vol 125 (4) ◽  
pp. 624-634 ◽  
Author(s):  
Xundan Shi ◽  
J. M. Khodadadi
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Computational Study ◽  
Convection Heat Transfer ◽  
Square Cavity ◽  
Left Wall ◽  
Flow Modification ◽  
Laminar Natural Convection ◽  
Rayleigh Numbers ◽  
Blockage Effect

A finite-volume-based computational study of steady laminar natural convection (using Boussinesq approximation) within a differentially heated square cavity due to the presence of a single thin fin is presented. Attachment of highly conductive thin fins with lengths equal to 20, 35 and 50 percent of the side, positioned at 7 locations on the hot left wall were examined for Ra=104,105,106, and 107 and Pr=0.707 (total of 84 cases). Placing a fin on the hot left wall generally alters the clockwise rotating vortex that is established due to buoyancy-induced convection. Two competing mechanisms that are responsible for flow and thermal modifications are identified. One is due to the blockage effect of the fin, whereas the other is due to extra heating of the fluid that is accommodated by the fin. The degree of flow modification due to blockage is enhanced by increasing the length of the fin. Under certain conditions, smaller vortices are formed between the fin and the top insulated wall. Viewing the minimum value of the stream function field as a measure of the strength of flow modification, it is shown that for high Rayleigh numbers the flow field is enhanced regardless of the fin’s length and position. This suggests that the extra heating mechanism outweighs the blockage effect for high Rayleigh numbers. By introducing a fin, the heat transfer capacity on the anchoring wall is always degraded, however heat transfer on the cold wall without the fin can be promoted for high Rayleigh numbers and with the fins placed closer to the insulated walls. A correlation among the mean Nu, Ra, fin’s length and its position is proposed.

Sign in / Sign up

Export Citation Format

Share Document