Dual Solutions in Magnetohydrodynamic Stagnation-Point Flow and Heat Transfer Over a Shrinking Surface With Partial Slip

2014 ◽  
Vol 136 (10) ◽  
Author(s):  
Tapas Ray Mahapatra ◽  
Samir Kumar Nandy ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Stagnation Point ◽  
Fluid Velocity ◽  
Velocity Slip ◽  
Stagnation Point Flow ◽  
Partial Slip ◽  
Shrinking Sheet ◽  
Slip Parameter ◽  
Similarity Transformations ◽  
Flow And Heat Transfer

In this paper, the problem of steady two-dimensional magnetohydrodynamic (MHD) stagnation-point flow and heat transfer of an incompressible viscous fluid over a stretching/shrinking sheet is investigated in the presence of velocity and thermal slips. With the help of similarity transformations, the governing Navier–Stokes and the energy equations are reduced to ordinary differential equations, which are then solved numerically using a shooting technique. Interesting solution behavior is observed for the similarity equations with multiple solution branches for certain parameter domain. Fluid velocity increases due to the increasing value of the velocity slip parameter resulting in a decrease in the temperature field. Temperature at a point increases with increase in the thermal slip parameter. The effects of the slips, stretching/shrinking, and the magnetic parameters on the skin friction or the wall shear stress, heat flux from the surface of the sheet, velocity, and temperature profiles are computed and discussed.

Melting heat transfer in boundary layer stagnation-point flow of a nanofluid towards a stretching–shrinking sheet

2014 ◽  
Vol 92 (12) ◽  
pp. 1703-1708 ◽  
Author(s):  
Kishore Kumar Ch. ◽  
Shankar Bandari
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Skin Friction Coefficient ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Shooting Technique ◽  
Similarity Transformations ◽  
Flow And Heat Transfer ◽  
Fourth Order Method

The present analysis deals with the study of two-dimensional stagnation-point flow and heat transfer from a warm, laminar liquid flow of a nanofluid towards a melting stretching sheet. Using similarity transformations, the governing differential equations were transformed into coupled, nonlinear ordinary differential equations, which were then solved numerically by using the Runge–Kutta fourth-order method along with the shooting technique for two types of nanoparticles namely copper (Cu) and silver (Ag) in the water-based fluid with Prandtl number Pr = 6.2, the skin friction coefficient, the local Nusselt number, the velocity and the temperature profiles are presented graphically and discussed.

scholarly journals Analytical Solution of MHD Stagnation-Point Flow and Heat Transfer of Casson Fluid over a Stretching Sheet with Partial Slip

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Samir Kumar Nandy
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Velocity Slip ◽  
Casson Fluid ◽  
Temperature Fields ◽  
Partial Slip ◽  
Thermal Slip ◽  
Slip Parameter ◽  
Flow And Heat Transfer

This paper investigates the hydromagnetic boundary layer flow and heat transfer of a non-Newtonian Casson fluid in the neighborhood of a stagnation point over a stretching surface in the presence of velocity and thermal slips at the boundary. The governing partial differential equations are transformed into nonlinear ordinary differential equations using similarity transformations. The analytic solutions are developed by a homotopy analysis method (HAM). The results pertaining to the present study indicate that the flow and temperature fields are significantly influenced by Casson parameter (), the magnetic parameter , the velocity slip parameter , and the thermal slip parameter . An increase in the velocity slip parameter causes decrease in the flow velocity, while an increase in the value of the thermal slip parameter causes increase in the temperature of the fluid. It is also observed that the velocity at a point decreases with increase in .

Stability analysis on the stagnation-point flow and heat transfer over a permeable stretching/shrinking sheet with heat source effect

2018 ◽  
Vol 28 (11) ◽  
pp. 2650-2663 ◽  
Author(s):  
Fatinnabila Kamal ◽  
Khairy Zaimi ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Stability Analysis ◽  
Heat Source ◽  
Skin Friction ◽  
Stagnation Point ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type ◽  
Source Effect ◽  
Flow And Heat Transfer

PurposeThis paper aims to analyze the behavior of the stagnation-point flow and heat transfer over a permeable stretching/shrinking sheet in the presence of the viscous dissipation and heat source effects.Design/methodology/approachThe governing partial differential equations are converted into ordinary differential equations by similarity transformations before being solved numerically using the bvp4c function built in Matlab software. Effects of suction/injection parameter and heat source parameter on the skin friction and heat transfer coefficients as well as the velocity and temperature profiles are presented in the forms of tables and graphs. A temporal stability analysis will be conducted to verify which solution is stable for the dual solutions exist for the shrinking case.FindingsThe analysis indicates that the skin friction coefficient and the local Nusselt number as well as the velocity and temperature were influenced by suction/injection parameter. In contrast, only the local Nusselt number, which represents heat transfer rate at the surface, was affected by heat source effect. Further, numerical results showed that dual solutions were found to exist for the certain range of shrinking case. Then, the stability analysis is performed, and it is confirmed that the first solution is linearly stable and has real physical implication, while the second solution is not.Practical implicationsIn practice, the study of the steady two-dimensional stagnation-point flow and heat transfer past a permeable stretching/shrinking sheet in the presence of heat source effect is very crucial and useful. The problems involving fluid flow over stretching or shrinking surfaces can be found in many industrial manufacturing processes such as hot rolling, paper production and spinning of fibers. Owing to the numerous applications, the study of stretching/shrinking sheet was subsequently extended by many authors to explore various aspects of skin friction coefficient and heat transfer in a fluid. Besides that, the study of suction/injection on the boundary layer flow also has important applications in the field of aerodynamics and space science.Originality/valueAlthough many studies on viscous fluid has been investigated, there is still limited discoveries found on the heat source and suction/injection effects. Indeed, this paper managed to obtain the second (dual) solutions and stability analysis is performed. The authors believe that all the results are original and have not been published elsewhere.

Unsteady separated stagnation-point flow and heat transfer past a stretching/shrinking sheet in a copper-water nanofluid

2019 ◽  
Vol 29 (8) ◽  
pp. 2588-2605 ◽  
Author(s):  
Natalia C. Roşca ◽  
Alin V. Roşca ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Stagnation Point ◽  
Design Methodology ◽  
Similarity Transformation ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose The purpose of this paper is to theoretically investigate the unsteady separated stagnation-point flow and heat transfer past an impermeable stretching/shrinking sheet in a copper (Cu)-water nanofluid using the mathematical nanofluid model proposed by Tiwari and Das. Design/methodology/approach A similarity transformation is used to reduce the governing partial differential equations to a set of nonlinear ordinary (similarity) differential equations which are then solved numerically using the function bvp4c from Matlab for different values of the governing parameters. Findings It is found that the solution is unique for stretching case; however, multiple (dual) solutions exist for the shrinking case. Originality/value The authors believe that all numerical results are new and original, and have not been published elsewhere.

scholarly journals Effect of Velocity Slip Boundary Condition on the Flow and Heat Transfer of Cu-Water and TiO2-Water Nanofluids in the Presence of a Magnetic Field

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Abdelhalim Ebaid ◽  
Fahd Al Mutairi ◽  
S. M. Khaled
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Fluid Velocity ◽  
Velocity Slip ◽  
Slip Boundary Condition ◽  
Dual Solutions ◽  
Slip Condition ◽  
Shrinking Sheet ◽  
Physical Parameters ◽  
Flow And Heat Transfer

In nanofluid mechanics, it has been proven recently that the no slip condition at the boundary is no longer valid which is the reason that we consider the effect of such slip condition on the flow and heat transfer of two types of nanofluids. The present paper considers the effect of the velocity slip condition on the flow and heat transfer of the Cu-water and the TiO2-water nanofluids over stretching/shrinking sheets in the presence of a magnetic field. The exact expression for the fluid velocity is obtained in terms of the exponential function, while an effective analytical procedure is suggested and successfully applied to obtain the exact temperature in terms of the generalized incomplete gamma function. It is found in this paper that the Cu-water nanofluid is slower than the TiO2-water nanofluid for both cases of the stretching/shrinking sheets. However, the temperature of the Cu-water nanofluid is always higher than the temperature of the TiO2-water nanofluid. In the case of shrinking sheet the dual solutions have been obtained at particular values of the physical parameters. In addition, the effect of various physical parameters on such dual solutions is discussed through the graphs.

Sign in / Sign up

Export Citation Format

Share Document