A New Simulation and Control Model for a Variable Speed Variable Pitch Direct Drive Large Offshore Wind Turbine Generator With Integrated Energy Storage

2014 ◽  
Author(s):  
B. Kazemtabrizi ◽  
S. Hogg
Keyword(s):  
Energy Storage ◽  
Wind Speed ◽  
Wind Turbine ◽  
Offshore Wind Turbine ◽  
Maximum Output ◽  
Variable Speed ◽  
Turbine Generator ◽  
Super Capacitor ◽  
Variable Pitch ◽  
Wind Turbine Generator

A comprehensive control and simulation model has been presented in this paper for a large multi-megawatt Variable Speed Variable Pitch Wind Turbine Generator (WTG) with Energy Storage System (ESS) integration. The generator is of a Permanent Magnet Synchronous Generator (PMSG) type which is then decoupled from the grid using a Fully-Rated back-to-back Converter (FRC) link. A Rotor Flux Oriented Control (RFOC) strategy has been adopted in order to extract the maximum output electromagnetic torque from the generator according to a Maximum Power Point Tracking (MPPT) profile for any wind speed lower than rated wind speed. The MPPT method presented in this paper relies on the turbine’s optimal output torque curve. The ESS makes provisions for enhanced performance especially during faults on the system. Dynamic performance of a super-capacitor makes it ideal as the integrated ESS in the WTG for satisfying such performance constraints. Results indicate that the WTG integrated with a super-capacitor ESS provides the required enhanced performance in terms of DC link voltage stability and limiting output power fluctuations during sudden variations in the wind speed as well as enhanced Fault Ride-Through (FRT) capability.

scholarly journals A Reliability Based Model for Wind Turbine Selection

2013 ◽  
Vol 2 (2) ◽  
pp. 69-74 ◽  
Author(s):  
A.K. Rajeevan ◽  
P.V. Shouri ◽  
Usha Nair
Keyword(s):  
Power Generation ◽  
Wind Speed ◽  
Wind Turbine ◽  
Wind Power ◽  
Point Of View ◽  
Cube Root ◽  
Mathematical Relationship ◽  
Turbine Generator ◽  
Wind Turbine Generator ◽  
A Site

A wind turbine generator output at a specific site depends on many factors, particularly cut- in, rated and cut-out wind speed parameters. Hence power output varies from turbine to turbine. The objective of this paper is to develop a mathematical relationship between reliability and wind power generation. The analytical computation of monthly wind power is obtained from weibull statistical model using cubic mean cube root of wind speed. Reliability calculation is based on failure probability analysis. There are many different types of wind turbinescommercially available in the market. From reliability point of view, to get optimum reliability in power generation, it is desirable to select a wind turbine generator which is best suited for a site. The mathematical relationship developed in this paper can be used for site-matching turbine selection in reliability point of view.

Interannual Wind Speed Variations and Estimated Wind Turbine Generator Energy Output at Selected Sites in the Pacific Northwest

1985 ◽  
Vol 107 (3) ◽  
pp. 237-239
Author(s):  
R. W. Baker
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Pacific Northwest ◽  
Power Measurement ◽  
Energy Output ◽  
Turbine Generator ◽  
Wind Turbine Generator ◽  
Speed Variation ◽  
Percent Increase ◽  
The Mean

The hourly wind speed data collected over a six-year period at four wind power measurement locations are used to estimate the annual energy output of a large wind turbine generator. The interannual energy and wind speed variations are discussed. The estimated interannual energy output at each location is related to the mean annual wind speed variation. The data indicate that at three of the four locations the estimated interannual energy variation varied as the square of the mean annual wind speed variation. That is, a 10 percent increase in the mean annual wind speed resulted in a 20 percent increase in the annual energy output. At the fourth location there was an approximate linear relationship.

Numerical Simulations of Aerodynamic Feature for Variable Speed Offshore Wind Turbine

2011 ◽  
Vol 52-54 ◽  
pp. 1556-1559
Author(s):  
Ping He ◽  
Nai Chao Chen ◽  
Dan Mei Hu
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Gas Flow ◽  
Rapid Change ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Total Force ◽  
Variable Speed ◽  
Horizontal Axis Wind Turbine ◽  
Blade Height

The liquid-gas flow is proposed to accurately simulate the offshore environmental state. The aerodynamic feature is estimated using the three-dimensional model of horizontal-axis wind turbine with NRELS809 series aerofoil by means of the simulating software tool of FLUENT. The variable speed is implemented via the six different wind speeds. The calculated results show that the similarly evolutional tendency of velocity occurs in the wake region when operating at the six variable speeds. The stall speed is related to blade height and wind speed. The small blade height or large wind speed also leads to the serious stall phenomenon. The total force is conducted to estimate the potential capability for leeward and windward surface to capture wind power. The calculated results reveal that the larger wind speed facilitates generating the more magnitude of total force. However, the velocity and force feature for the wind turbine has the especially rapid change at the wind speed of 6 m/s, which perhaps results from the intrinsic geometry and configuration.

Sign in / Sign up

Export Citation Format

Share Document