Stress Analysis at Cervical Region of Human Teeth

1999 ◽  
Author(s):  
Chih-Han Chang ◽  
Chun-Li Lin ◽  
Chau-Hsiang Wang ◽  
Huey-Er Lee
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Cervical Region ◽  
Restorative Material ◽  
Cervical Lesions ◽  
Human Teeth ◽  
Restorative Materials ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

Abstract The concept of stress-induced cervical lesions has been discussed widely in recent years. In this study, a three-dimensional finite element model was established to analyze the stress distribution at cervical region and evaluate the stresses on the interface of different restorative materials. The results indicated that tensile stress might be the major cause for tooth cervical lesion. For different restorative materials, the elastic modulus was not the key issue in premature loss of restorative material. The bonding strength between the restorative material and lesions could be the important factor for the retention failure.

scholarly journals Stress Analysis of Occlusal Forces in Canine Teeth and Their Role in the Development of Non-Carious Cervical Lesions: Abfraction

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Shihab A. Romeed ◽  
Raheel Malik ◽  
Stephen M. Dunne
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Axial Loading ◽  
Element Model ◽  
Lateral Loading ◽  
Cervical Lesions ◽  
Canine Tooth ◽  
Element Analysis ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

Non-carious cervical tooth lesions for many decades were attributed to the effects of abrasion and erosion mainly through toothbrush trauma, abrasive toothpaste, and erosive acids. However, though the above may be involved, more recently a biomechanical theory for the formation of these lesions has arisen, and the term abfraction was coined. The aim of this study was to investigate the biomechanics of abfraction lesions in upper canine teeth under axial and lateral loading conditions using a three-dimensional finite element analysis. An extracted human upper canine tooth was scanned byμCT machine (Skyscan, Belgium). TheseμCT scans were segmented, reconstructed, and meshed using ScanIP (Simpleware, Exeter, UK) to create a three-dimensional finite element model. A 100 N load was applied axially at the incisal edge and laterally at 45° midpalatally to the long axis of the canine tooth. Separately, 200 N axial and non-axial loads were applied simultaneously to the tooth. It was found that stresses were concentrated at the CEJ in all scenarios. Lateral loading produced maximum stresses greater than axial loading, and pulp tissues, however, experienced minimum levels of stresses. This study has contributed towards the understanding of the aetiology of non-carious cervical lesions which is a key in their clinical management.

Finite Element Analysis of Nonuniformity of Tires with Imperfections5

2007 ◽  
Vol 35 (3) ◽  
pp. 226-238 ◽  
Author(s):  
K. M. Jeong ◽  
K. W. Kim ◽  
H. G. Beom ◽  
J. U. Park
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Radial Force ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Dimensional Finite Element ◽  
Force Variation ◽  
Three Dimensional Finite Element

Abstract The effects of variations in stiffness and geometry on the nonuniformity of tires are investigated by using the finite element analysis. In order to evaluate tire uniformity, a three-dimensional finite element model of the tire with imperfections is developed. This paper considers how imperfections, such as variations in stiffness or geometry and run-out, contribute to detrimental effects on tire nonuniformity. It is found that the radial force variation of a tire with imperfections depends strongly on the geometrical variations of the tire.

Mechanical Simulation of Knee Movement in Basketball Shooting

2013 ◽  
Vol 336-338 ◽  
pp. 760-763
Author(s):  
Hui Yue
Keyword(s):  
Finite Element ◽  
Cruciate Ligament ◽  
Three Dimensional ◽  
Element Model ◽  
Basketball Player ◽  
Knee Movement ◽  
Dimensional Finite Element ◽  
Anterior Cruciate ◽  
Three Dimensional Finite Element

A short explanation of the finite element method as a powerful tool for mathematical modeling is provided, and an application using constitutive modeling of the behavior of ligaments is introduced. Few possible explanations of the role of water in ligament function are extracted from two dimensional finite element models of a classical ligament. The modeling is extended to a three dimensional finite element model for the human anterior cruciate ligament. Simulation of ligament force in pitching motion of basketball player is studied in this paper.

Sign in / Sign up

Export Citation Format

Share Document