scholarly journals Cutting Force Modeling and Optimization in 3D Plane Surface Machining

1999 ◽  
Author(s):  
Hsi-Yung (Steve) Feng ◽  
Ning Su
Keyword(s):  
Cutting Force ◽  
Cutting Forces ◽  
End Milling ◽  
Plane Surface ◽  
Mechanistic Modeling ◽  
Surface Finishing ◽  
Force Model ◽  
Cutting Force Model ◽  
Ball End Milling ◽  
Finishing Machining

Abstract The prediction and optimization of cutting forces in the finishing machining of 3D plane surfaces using ball-end milling are presented in this paper. The cutting force model is developed based on the mechanistic modeling approach. This improved model is able to accurately predict the cutting forces for non-horizontal and cross-feed cutter movements typical in 3D finishing ball-end milling. Optimization of the cutting forces is used to determine both the tool path and the maximum feed rate in 3D plane surface finishing machining. The objective is to achieve highest machining efficiency and to ensure product quality. Experimental results have shown that the cutting force model gives excellent predictions of cutting forces in 3D finishing ball-end milling. The feasibility of the integrated process planning method has been demonstrated through the establishment of optimized process plans for the finishing machining of 3D plane surfaces.

A Mechanistic Cutting Force Model for 3D Ball-end Milling

2000 ◽  
Vol 123 (1) ◽  
pp. 23-29 ◽  
Author(s):  
Hsi-Yung Feng ◽  
Ning Su
Keyword(s):  
Cutting Force ◽  
Cutting Forces ◽  
End Milling ◽  
Chip Thickness ◽  
Milling Process ◽  
Force Model ◽  
Cutting Force Model ◽  
Ball End Milling ◽  
End Milling Process ◽  
Force Relationship

This paper presents an improved mechanistic cutting force model for the ball-end milling process. The objective is to accurately model the cutting forces for nonhorizontal and cross-feed cutter movements in 3D finishing ball-end milling. Main features of the model include: (1) a robust cut geometry identification method to establish the complicated engaged area on the cutter; (2) a generalized algorithm to determine the undeformed chip thickness for each engaged cutting edge element; and (3) a comprehensive empirical chip-force relationship to characterize nonhorizontal cutting mechanics. Experimental results have shown that the present model gives excellent predictions of cutting forces in 3D ball-end milling.

Analytical Convolution Model of Cutting Forces in 3-D Ball End Milling

2001 ◽  
Author(s):  
Richard Y. Chiou ◽  
Bing Zhao
Keyword(s):  
Cutting Force ◽  
Frequency Domain ◽  
Cutting Forces ◽  
End Milling ◽  
Force Model ◽  
Three Dimensional Model ◽  
Calculation Algorithm ◽  
Ball End Milling ◽  
Convolution Model ◽  
Force Calculation

Abstract This paper presents an analytical convolution model of dynamic cutting forces in ball end milling of 3-D plane surfaces. The model takes into account the instantaneous slope on a sculptured surface to establish the chip geometry in cutting force calculation algorithm. A three-dimensional model of cutting forces in ball end milling is presented in terms of material properties, cutting parameters, machining configuration, and tool/work geometry. Based on the relationship of the local cutting force, chip load and engaged boundary, the total cutting force model is established via the angle domain convolution integration of the local forces in the feed, cross feed, axial direction, and inclination angle. The convolution integral leads to a periodic function of cutting forces in the angle domain and an explicit expression of the dynamic cutting force components in the frequency domain. Following the theoretical analysis, experimental study is discussed to illustrate the implementation procedure for force identification, and frequency domain data are presented to verify the analytical results.

Analysis of Cutting Force in Elastomer End-Milling

2017 ◽  
Vol 11 (6) ◽  
pp. 958-963
Author(s):  
Koji Teramoto ◽  
◽  
Takahiro Kunishima ◽  
Hiroki Matsumoto
Keyword(s):  
Parameter Identification ◽  
Cutting Force ◽  
Cutting Forces ◽  
End Milling ◽  
Process Models ◽  
Force Model ◽  
Cutting Force Model ◽  
Cutting Force Prediction ◽  
Force Prediction ◽  
The Stability

Elastomer end-milling is attracting attention for its role in the small-lot production of elastomeric parts. In order to apply end-milling to the production of elastomeric parts, it is important that the workpiece be held stably to avoid deformation. To evaluate the stability of workholding, it is necessary to predict cutting forces in elastomer end-milling. Cutting force prediction for metal workpiece end-milling has been investigated for many years, and many process models for end-milling have been proposed. However, the applicability of these models to elastomer end-milling has not been discussed. In this paper, the characteristics of the cutting force in elastomer end-milling are evaluated experimentally. A standard cutting force model and its parameter identification method are introduced. By using this cutting force model, measured cutting forces are compared against the calculated results. The comparison makes it clear that the standard cutting force model for metal end-milling can be applied to down milling for a rough evaluation.

Research on Feedrate Optimization Based on Cutting Force Model with Double Effect for the Ball-End Milling

2011 ◽  
Vol 291-294 ◽  
pp. 2965-2969
Author(s):  
Yu Jun Cai ◽  
Hua Shen ◽  
Tie Li Qi
Keyword(s):  
Cutting Force ◽  
End Milling ◽  
Double Effect ◽  
Machining Process ◽  
Force Model ◽  
Optimization Strategy ◽  
Cutting Force Model ◽  
Ball End Mill ◽  
Ball End Milling ◽  
Feedrate Optimization

A new cutting force model of ball-end mill with double effect is developed through analysing the machining process by using differential geometry. The cutting force model is needed to be revised for the component force in Z direction because of the offset to the actual results. The cutting force and the ball-end milling force coefficients can be given with numerical method. A feedrate optimization strategy is also proposed based on the developed cutting force model and tested effectively.

Cutting Force Prediction for Generalized Cornering Milling Process

2011 ◽  
Vol 188 ◽  
pp. 404-409 ◽  
Author(s):  
Xue Yan ◽  
Hua Tao ◽  
D.H. Zhang ◽  
B.H. Wu
Keyword(s):  
Cutting Force ◽  
Cutting Forces ◽  
End Milling ◽  
Milling Process ◽  
Force Model ◽  
Cutting Force Model ◽  
Cutting Force Prediction ◽  
Geometric Relationship ◽  
The Mathematical Model ◽  
Good Agreement

A developed method to predict the cutting forces in end milling of generalized corners is proposed in this paper. The cornering milling process is divided into a series of cutting segments with different cutting states. The mathematical model of the geometric relationship between cutter and the corner profile is established for each segment. Cutting forces is predicted by introducing the classical cutting force model. The computational results of cutting forces are in good agreement with experimental data.

Calibration of a Milling Force Model Using Feed and Spindle Power Sensors

2008 ◽  
Author(s):  
Bryan Javorek ◽  
Barry K. Fussell ◽  
Robert B. Jerard
Keyword(s):  
Cutting Force ◽  
Cutting Forces ◽  
End Milling ◽  
Machining Process ◽  
Force Model ◽  
Cutting Force Model ◽  
Drive Power ◽  
Average Force ◽  
Force Monitoring ◽  
Milling Force Model

Changes in cutting forces during a milling operation can be associated with tool wear and breakage. Accurate monitoring of these cutting forces is an important step towards the automation of the machining process. However, direct force sensors, such as dynamometers, are not practical for industry application due to high costs, unwanted compliance, and workspace limitations. This paper describes a method in which power sensors on the feed and spindle motors are used to generate coefficients for a cutting force model. The resulting model accurately predicts the X and Y cutting forces observed in several simple end-milling tests, and should be capable of estimating both the peak and average force for a given cut geometry. In this work, a dynamometer is used to calibrate the feed drive power sensor and to measure experimental cutting forces for verification of the cutting force model. Measurement of the average x-axis cutting forces is currently presented as an off-line procedure performed on a sacrificial block of material. The potential development of a continuous, real-time force monitoring system is discussed.

3D Ball-End Milling Force Model Using Instantaneous Cutting Force Coefficients

2005 ◽  
Vol 127 (1) ◽  
pp. 1-12 ◽  
Author(s):  
Jeong Hoon Ko ◽  
Dong-Woo Cho
Keyword(s):  
Cutting Force ◽  
End Milling ◽  
Cutting Conditions ◽  
Force Model ◽  
Cutting Force Model ◽  
Cutting Force Coefficients ◽  
Milling Force ◽  
Ball End Milling ◽  
Force Coefficients ◽  
Instantaneous Cutting Force Coefficients

Application of a ball-end milling process model to a CAD/CAM or CAPP system requires a generalized methodology to determine the cutting force coefficients for different cutting conditions. In this paper, we propose a mechanistic cutting force model for 3D ball-end milling using instantaneous cutting force coefficients that are independent of the cutting conditions. The uncut chip thickness model for three-dimensional machining considers cutter deflection and runout. An in-depth analysis of the characteristics of these cutting force coefficients, which can be determined from only a few test cuts, is provided. For more accurate cutting force predictions, the size effect is also modeled using the cutter edge length of the ball-end mill and is incorporated into the cutting force model. This method of estimating the 3D ball-end milling force coefficients has been tested experimentally for various cutting conditions.

scholarly journals Modeling Cutting Forces for Five Axis Milling of Sculptured Surfaces

2011 ◽  
Vol 223 ◽  
pp. 701-712 ◽  
Author(s):  
Yaman Boz ◽  
Huseyin Erdim ◽  
Ismail Lazoglu
Keyword(s):  
Cutting Force ◽  
Cutting Forces ◽  
End Milling ◽  
Force Model ◽  
Ball End Milling ◽  
Validation Test ◽  
Tool Accessibility ◽  
Solid Modeler ◽  
Five Axis ◽  
Machining Productivity

5-axis ball-end milling processes are used in various industries such as aerospace, automotive, die-mold and biomedical industries. 5-axis machining provides reduced cycle times and more accurate machining via reduction in machining setups, use of shorter tools due to improved tool accessibility. However, desired machining productivity and precision can be obtained by physical modeling of machining processes via appropriate selection of process parameters. In response to this gap in the industry this paper presents a cutting force model for 5-axis ball-end milling cutting force prediction. Cutter-workpiece engagement is extracted via developed solid modeler based engagement model. Simultaneous 5-axis milling tests are conducted on Al7075 workpiece material with a carbide cutting tool. Validation of the proposed model is performed for impeller hub roughing toolpaths. Validation test proves that presented model is computationally efficient and cutting forces can be predicted reasonably well. The result of validation test and detailed comparison with the simulation are also presented in the paper.

Sign in / Sign up

Export Citation Format

Share Document