Ammonium Nitrogen Streamflow Transport Modelling and Spatial Analysis in Two Chinese Basins

Ammonium nitrogen (NH4+-N), which naturally arises from the decomposition of organic substances through ammonification, has a tremendous influence on local water quality. Therefore, it is vital for water quality protection to assess the amount, sources, and streamflow transport of NH4+-N. SPAtially Referenced Regressions on Watershed attributes (SPARROW), which is a hybrid empirical and mechanistic modeling technique based on a regression approach, can be used to conduct studies of different spatial scales on nutrient streamflow transport. In this paper, the load and delivery of NH4+-N in Poyang Lake Basin (PLB) and Haihe River Basin (HRB) were estimated using SPARROW. In PLB, NH4+-N load streamflow transport originating from point sources and farmland accounted for 41.83% and 32.84%, respectively. In HRB, NH4+-N load streamflow transport originating from residential land and farmland accounted for 40.16% and 36.75%, respectively. Hence, the following measures should be taken: In PLB, it is important to enhance the management of the point sources, such as municipal and industrial wastewater. In HRB, feasible measures include controlling the domestic pollution and reducing the usage of chemical fertilizers. In addition, increasing the vegetation coverage of both basins may be beneficial to their nutrient management. The SPARROW models built for PLB and HRB can serve as references for future uses for different basins with various conditions, extending this model’s scope and adaptability.

Analysis of Membrane Process Model from Black Box to Machine Learning

The membrane processes include the complex frameworks, typically integrating various physio-chemical aspects, and the biological activities, based on the systems researched. In that regard, the process modeling is essential to predict and simulate the process and the performance of membranes, to infer concerning the optimum process aspects, meant to analyze fouling developments, and principally, the controls and monitoring of processes. Irrespective of the real terminological dissemination such as Machine Learning (ML), the application of computing instruments to the processes of model membrane was considered in the past are insignificant from the scholarly perspective, not contributing to our knowledge of the aspects included. Irrespective of the controversies, in the past two decades, non-mechanistic and data-driven modeling is applicable to illustrate various membrane process, and in the establishment of novel tracking and modeling approaches. In that regard, this paper concentrates on the provision of a custom aspect regarding the use of Non-Mechanistic Modeling (NMM) in membrane processing, assessing the transformations endorsed by our experience, accomplished as a research segment operational in the membrane process segment. Furthermore, the guidelines are the problems for the application of the state-of-the-art computational instruments Membrane Computing (MC).

Mechanistic modeling of cutting forces in high-speed microturning of titanium alloy with consideration of nose radius

Microturning is a micromechanical machining process used to produce microcylindrical or axially symmetrical parts. Microcylindrical parts are mainly used in microfluidic systems, intravenous micromotors, microsurgical applications, optical lens applications, and microinjection systems. The workpiece diameter is very small in microturning and therefore is greatly affected by the cutting forces. For this reason, it is important to predict the cutting forces when machining miniature parts. In this study, an analytical mechanistic model of microturning is used to predict the cutting forces considering the tool nose radius. In the semi-empirically developed mechanistic model, the tool radius was considered. A series of semi-orthogonal microturning cutting tests were carried out to determine the cutting and edge force coefficients. The mechanistic model was generalized depending on the cutting speed and depth of cut by performing multilinear regression analysis. In the study, the depth of cut (ap = 30–90 µm) and feed values (f = 0.5–20 µm/rev) were selected considering the nose radius and edge radius of the cutting tool. The experiments were carried out under high-cutting speeds (Vc = 150–500 m/min) and microcutting conditions. Ti6Al4V alloy was used as the workpiece material and the tests were carried out under dry cutting conditions. Validation tests for different cutting parameters were carried out to validate the accuracy of the developed mechanistic model. The results showed that the difference between the mechanistic model and the experimental data was a minimum of 3% and a maximum of 24%. The maximum difference between the experimental and the model usually occurs in forces in the tangential direction. It has been observed that the developed model gives accurate results even at a depth of cut smaller than the nose radius and at feed values smaller than the edge radius.