FEM Stress Analysis and Sealing Performance in Non-Circular Flange Connections With Gaskets Subjected to Internal Pressure

2003 ◽  
Author(s):  
Toshiyuki Sawa ◽  
Wataru Maezaki
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Internal Pressure ◽  
Stress Analysis ◽  
Stress Distributions ◽  
Flange Connection ◽  
Bolt Preload ◽  
Sealing Performance ◽  
Element Method

The contact gasket stress distributions of a non-circular flange connection with a compressed asbestos sheet gasket subjected to internal pressure were analyzed taking account a hysteresis of the gasket by using finite element method (FEM). Leakage tests were also conducted using an actual non-circular flange connection with a compressed asbestos sheet gasket under internal pressure. By using the contact gasket stress distributions and the results of the leakage tests, the new gasket constants were calculated. A difference in the new gasket constants between the values obtained from the present study and those by the PVRC procedure was substantial. In addition, a method to determine the initial clamping bolt force (bolt preload) for a given tightness parameter was demonstrated. abstract text here.

FEM Stress Analysis and an Evaluation of the Sealing Performance in Non-Circular Flange Connections With Gaskets Subjected to Internal Pressure

2006 ◽  
Author(s):  
Toshiyuki Sawa ◽  
Ryo Kurosawa ◽  
Wataru Maezaki
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Internal Pressure ◽  
Stress Analysis ◽  
Stress Distributions ◽  
The Finite Element Method ◽  
Flange Connection ◽  
Bolt Preload ◽  
Sealing Performance ◽  
The Difference

The contact gasket stress distributions of a non-circular flange connection with a compressed sheet gasket subjected to internal pressure were analyzed taking into account of the hysteresis behavior of the gasket by using the finite element method (FEM). Leakage tests were also conducted using an actual non-circular flange connection with a compressed sheet gasket under internal pressure. Using the contact gasket stress distributions and the results of the leakage tests, the new gasket constants were calculated. The difference in the new gasket constants between the values obtained from the present study and those by the PVRC procedure was substantial. In addition, a method to determine the initial clamping bolt force (bolt preload) for a given tightness parameter was demonstrated.

Effects of Scatter in Bolt Preload of Pipe Flange Connections With Gaskets on Sealing Performance

2003 ◽  
Author(s):  
Toshiyuki Sawa ◽  
Mitsuhiro Matsumoto ◽  
Satoshi Nagata
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Internal Pressure ◽  
Control Method ◽  
Torque Control ◽  
Stress Distributions ◽  
Flange Connection ◽  
Gas Leakage ◽  
Bolt Preload ◽  
Sealing Performance

It has been well known that a scatter in axial bolt forces of pipe flange connections tightened by the torque control method is substantial. It is necessary for evaluating the sealing performance of the pipe flange connections with the gaskets subjected to intemal pressure to know the contact gasket stress distributions due to the scatter of the axial bolt forces in the connections tightened by the torque control method. This paper deals with the leakage of the pipe flange connections with a spiral wound gasket and that with a compressed sheet gasket tightened by the torque control method. The scatter in the axial bolt forces was measured in the experiments. The contact gasket stress distributions at the interfaces of the pipe flange connections with the gaskets were calculated under the measured axial bolt forces by using elasto-plastic finite element method (FEM) taking into account hysteresis and non-linearity in the stress-strain curves of the gaskets. The effects of the scatter in the axial bolt forces tightened by the torque control method on the gas leakage were also examined by using the actual pipe flange connections. As the result, a difference in an amount of gas leakage measured was found to be substantial between our study and PVRC procedure. By using the calculated contact gasket stress distributions under the internal pressure and the results of the leakage tests, the sealing performance was evaluated. It is found that the sealing performance is worse in the actual pipe flange connection than that evaluated by PVRC procedure.

FEM Analysis and an Evaluation of the Sealing Performance in Flexible Box-Shape Flanged Bolted Joints With Gaskets Subjected to Internal Pressure

2006 ◽  
Author(s):  
Toshiyuki Sawa ◽  
Ryo Kurosawa ◽  
Yasuaki Tatsumi
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Internal Pressure ◽  
Fem Analysis ◽  
Bolted Joints ◽  
Stress Distributions ◽  
Bolt Preload ◽  
Sealing Performance ◽  
The Difference ◽  
Element Method

The contact gasket stress distributions of rectangular box-shape flange connections with compressed joint sheet gaskets subjected to internal pressure were analyzed taking account hysteresis of the gaskets using finite element method (FEM). Leakage tests were also conducted using actual rectangular box-shape flange connections with compressed joint sheet gaskets under internal pressure. By using the contact gasket stress distributions and the results of the leakage tests, the new gasket constants were calculated. The difference in the new gasket constants between the values obtained from the present study and those by the PVRC procedure was substantial. In addition, a method to determine the initial clamping bolt force (bolt preload) for a given tightness parameter was demonstrated.

Stress Analysis and Sealing Performance Evaluation in Non-Circular Flange Connections With Gaskets Subjected to Internal Pressure

2004 ◽  
Author(s):  
Wataru Maezaki ◽  
Toshiyuki Sawa
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Performance Evaluation ◽  
Internal Pressure ◽  
Stress Distributions ◽  
The Finite Element Method ◽  
Flange Connection ◽  
Bolt Preload ◽  
Sealing Performance ◽  
The Difference

The contact gasket stress distributions of a non-circular flange connection with a compressed asbestos sheet gasket subjected to internal pressure were analyzed taking into account of the hysteresis behaviors of the gasket by using the finite element method (FEM). Leakage tests were also conducted using an actual non-circular flange connection with a compressed asbestos sheet gasket under internal pressure. Using the contact gasket stress distributions and the results of the leakage tests, the new gasket constants were calculated. The difference in the new gasket constants between the values obtained from the present study and those by the PVRC procedure was substantial. In addition, a method to determine the initial clamping bolt force (bolt preload) for a given tightness parameter was demonstrated.

FEM Calculation and Evaluation of Sealing Performance in Oil Pan Wavy-Shaped Flange Gasketed Connections

2011 ◽  
Author(s):  
Ryou Kurosawa ◽  
Kentaro Tenma ◽  
Toshiyuki Sawa
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Internal Pressure ◽  
Design Method ◽  
Light Weight ◽  
Stress Distributions ◽  
Flange Connection ◽  
Sealing Performance ◽  
Bolt Spacing ◽  
Good Agreement

The oil pan wavy-shaped flange connection, while is a type of the box-shaped flange connections, has been used for the oil-pan in the vehicles such as cars and motorcycles to seal inner fluid. Though the light weight of these connections is important, the design method has not been established, since no research for evaluating the sealing performance of the wavy-shaped flange connections has been conducted. In this paper, The contact gasket stress distribution in a oil pan wavy-shaped flange connection under the internal pressure is examined taking into account a gasket hysteresis using finite element method (FEM) for estimating a location where a principal leakage occurs and for calculating the amount of leakage. Leakage tests were also conducted to validate the estimated results using an actual connection under internal pressure. The effects of flange shape and difference in types of inner fluid (gas / liquid) are examined on the contact gasket stress distributions and the sealing performance in the connections. It is found that the estimated amount of leakage is in a fairly good agreement with the measured results. Furthermore, discussion on the effect of the bolt spacing and the gasket width on the sealing performance are made.

Finite Element Method Stress Analysis and Evaluation of the Sealing Performance in Box-Shape Flange Gasketed Connections Subjected to Internal Pressure

2017 ◽  
Vol 139 (5) ◽  
Author(s):  
Toshiyuki Sawa ◽  
Kentaro Tenma ◽  
Takashi Kobayashi ◽  
Ryou Kurosawa
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Internal Pressure ◽  
Displacement Curve ◽  
Stress Distributions ◽  
Analysis And Evaluation ◽  
Gas Leakage ◽  
Sealing Performance ◽  
Cover Thickness ◽  
Element Method

Bolted connections inserting gaskets such as box-shape flange connections have been widely used in mechanical structures, nuclear and chemical industry, and so on. They are usually used under internal pressure. In designing the box-shape flange connections with gaskets under internal pressure, it is important to clarify the gasket stress distribution for evaluating the sealing performance of these connections. However, no research in which the sealing performance of these connections is examined under internal pressure has been carried out. Thus, the design for box-shape connection such as thickness of flange cover, number of bolts, gasket width, and so on is not clarified. In this paper, the contact gasket stresses of these connections under internal pressure are analyzed using the finite element method (FEM), taking into account a hysteresis in the stress–displacement curve of the gasket. And then, using the contact gasket stress distributions obtained from FE analysis and the relationship between gasket stress and leak rate obtained from a gasket sealing test (JIS B2490), a method for estimating an amount of leakage is examined. Leakage tests were also conducted to measure an amount of gas leakage using an actual box-shape flange connection with a gasket. The estimated results are in reasonable agreement with the experimental results. In addition, the effect of gasket width, flange cover thickness, and flange cover material is examined on the sealing performances of box-shape flange connections under internal pressure. The effects of the above factors are discussed on the sealing performance in designing box-shape flange connections.

Stress Analysis and Sealing Performance Evaluation in Rectangular Box-Shape Bolted Flange Connection With Gasket Subjected to Internal Pressure

2011 ◽  
Vol 133 (2) ◽  
Author(s):  
Toshiyuki Sawa ◽  
Ryo Kurosawa ◽  
Wataru Maezaki
Keyword(s):  
Finite Element Method ◽  
Internal Pressure ◽  
Research Council ◽  
Stress Distributions ◽  
The Finite Element Method ◽  
Flange Connection ◽  
Bolt Preload ◽  
Sealing Performance ◽  
The Difference ◽  
Bolted Flange

The contact gasket stress distributions in a rectangular box-shape bolted flange connection with a compressed sheet gasket subjected to internal pressure were analyzed using the finite element method. Leakage tests were also conducted for an actual rectangular box-shape bolted flange connection with a compressed sheet gasket under internal pressure. Using the obtained contact gasket stress distributions and the results of the leakage tests, the new gasket constants were calculated. The difference in the new gasket constants between the values obtained from the present study and those from the Pressure Vessel Research Council (PVRC) procedure was substantial. In addition, a method to determine the bolt preload for a given tightness parameter was demonstrated and the difference in the determined bolt preload was shown between the present study and the PVRC procedure. The characteristics of the rectangular box-shape bolted flange connection were demonstrated by comparing those of circular bolted flange connections.

Stress Analysis and the Sealing Performance Evaluation of Pipe Flange Connection With Spiral Wound Gaskets Under Internal Pressure

2002 ◽  
Author(s):  
Toshiyuki Sawa ◽  
Naofumi Ogata
Keyword(s):  
Finite Element ◽  
Stress Analysis ◽  
Contact Stress ◽  
Strain Curve ◽  
Stress Distributions ◽  
Element Analysis ◽  
Flange Connection ◽  
Nominal Diameter ◽  
Bolt Preload ◽  
Spiral Wound

This paper deals with the stress analysis of a pipe flange connection with a spiral wound gasket using the elasto-plastic finite element method taking account the hysteresis and the non-linearity in the stress-strain curve of the spiral wound gasket, when an intemal pressure is applied to the pipe flange connections with the different nominal diameters from 2″ to 20″. The effects of the nominal diameter of the pipe flange on the contact stress distributions at the interfaces are examined. Leakage tests of the pipe flange connections with 3″ and 20″ nominal diameters were conducted and measurement of the axial bolt force was also performed. The results by the finite element analysis are fairly consistent with the experimental results concerning the variation in the axial bolt force. By using the contact stress distributions and the results of the leakage test, the new gasket constants are evaluated. As a result, it is found that the variations in the contact stress distributions are substantial due to the flange rotation in the pipe flange connections with the larger nominal diameter. In addition, a method to determine the bolt preload for a given tightness parameter is demonstrated.

Stress Analysis and the Sealing Performance Evaluation of Pipe Flange Connections With Gaskets Subjected to Internal Pressure and External Bending Moment: Effects of Scatter in Bolt Preload

2004 ◽  
Author(s):  
Toshiyuki Sawa ◽  
Wataru Maezaki ◽  
Satoshi Nagata
Keyword(s):  
Finite Element Method ◽  
Internal Pressure ◽  
Control Method ◽  
Bending Moment ◽  
Torque Control ◽  
Stress Distributions ◽  
Gas Leakage ◽  
Bolt Preload ◽  
Sealing Performance ◽  
Spiral Wound

It has been well known that a scatter in axial bolt forces of pipe flange connections tightened by the torque control method is substantial. It is necessary for evaluating the sealing performance of the pipe flange connections with the gaskets subjected to internal pressure and external bending moment to know the contact gasket stress distributions due to the scatter of the axial bolt forces in the connections tightened by the torque control method. This paper deals with the leakage of the pipe flange connections with a spiral wound gasket subjected to internal pressure and external bending moment tightened by the torque control method. The scattered axial bolt forces were measured in the experiments. The contact gasket stress distributions at the interfaces between pipe flanges and the gasket were calculated under the measured axial bolt force by using elasto-plastic finite element method (FEM) taking into account hysteresis and non-linearity in the stress-strain curves of spiral wound gasket. The effects of the scatter in the axial bolt forces tightened by the torque control method on the gas leakage were also examined by using the actual pipe flange connections under internal pressure and external bending moment. By using the calculated contact stress distributions and the results of the leakage tests, the sealing performance was evaluated. It is found that the sealing performance is worse in the actual pipe flange connection than that evaluated by PVRC procedure.

Elasto-Plastic FEM Stress Analysis of Pipe Flange Connections Under Internal Pressure

2006 ◽  
Author(s):  
Toshiyuki Sawa ◽  
Satoshi Nagata ◽  
Naofumi Ogata
Keyword(s):  
Finite Element ◽  
Internal Pressure ◽  
Stress Analysis ◽  
Contact Stress ◽  
Strain Curve ◽  
Stress Distributions ◽  
Element Analysis ◽  
Nominal Diameter ◽  
Bolt Preload ◽  
Spiral Wound

This paper deals with the stress analysis of a pipe flange connection with a spiral wound gasket using the elasto-plastic finite element method taking account the hysteresis and the non-linearity in the stress-strain curve of the spiral wound gasket, when an internal pressure is applied to the pipe flange connections with the different nominal diameters from 2 to 20. The effects of the nominal diameter of the pipe flange on the contact stress distributions at the interfaces are examined. Leakage tests of the pipe flange connections with 3 and 20 nominal diameters were conducted and measurement of the axial bolt force was also performed. The results by the finite element analysis are fairly consistent with the experimental results concerning the variation in the axial bolt force. By using the contact stress distributions and the results of the leakage test, the new gasket constants are evaluated. As a result, it is found that the variations in the contact stress distributions are substantial due to the flange rotation in the pipe flange connections with the larger nominal diameter. In addition, a method to determine the bolt preload for a given tightness parameter is demonstrated.

Sign in / Sign up

Export Citation Format

Share Document