A Feasibility Study of Active Noise Cancellation of Low‐Frequency Sound Inside Vehicle Cabs

1983 ◽  
Vol 73 (2) ◽  
pp. 699-699 ◽  
Author(s):  
T. S. Berge
2008 ◽  
Vol 20 (02) ◽  
pp. 123-131
Author(s):  
Jiun-Hung Lin ◽  
Shih-Tsang Tang ◽  
Wei-Ru Han ◽  
Chih-Yuan Chuang ◽  
Ping-Ting Liu ◽  
...  

Many industrial workers must wear hearing protectors in order to avoid hearing loss. Conventional passive methods, such as earmuffs, are ineffective against low-frequency noise, and so the present study developed a headset equipped with a digital signal processing system that implements adaptive-feedback active noise cancellation (FbAANC) to reduce the low-frequency noise. The proposed FbAANC headset system reduced the noise level by 40–60 dB at frequencies down to 63 Hz. We also evaluated the effects of the FbAANC headset on speech intelligibility on a disyllabic Mandarin word discrimination test (WDT) platform. For an SNR below–10 dB, the mean WDT score was 13%–32% higher with the FbAANC headset than without the headset in 30 subjects with normal hearing thresholds. These results suggest that the FbAANC headset would be useful for hearing protection in workplaces with high levels of wideband industrial noise.


Author(s):  
Farhad Forouharmajd ◽  
Masoumeh Ahmadvand ◽  
Parvin Nassiri ◽  
Farshad Forouharmajd

Acoustic noise can be reduced by active noise cancellation (ANC) and passive noise cancellation (PNC) algorithm. The PNC can effectively attenuate the noise with high frequency, but not the noise with low frequency. ANC is one of the promising solution to reduce the low frequency noise. Commercial ANC headphones often use the digital signal processor (DSP) to perform the noise cancellation algorithm to cancel the annoying acoustic noise, but the cost is relatively high. A low-cost ANC solution is urgently needed to reduce the acoustic noise. The relationship between the frequency, distance and degree of magnitude of the noise level are also evaluated in this paper.


Author(s):  
John G. Casall ◽  
Daniel W. Gower

Active noise cancellation (ANC) techniques utilize electronic circuitry to provide a phase-inverted sound wave, or “anti-noise,” to physically cancel the energy in an offending noise. This technique, originally used for abatement of noise in sound fields, has recently been refined and adapted to headset communications systems to 1) improve the speech/noise (S/N) ratio at the ear, and 2) reduce the noise exposure threat to hearing. ANC poses several important human factors issues encompassing speech intelligibility performance, attenuation performance, reliability and maintainability, and appropriateness of application to specific noise problems, all of which are addressed briefly in this paper. Also discussed is an experiment using a Bose Aviation Headset in its ANC mode, a Bose Aviation Headset in its non-active mode, and a conventional (non-ANC) David Clark H10-76 Headset. The Bose ANC unit required a significantly higher S/N ratio in tank and pink noise environments than the two passive headset systems to maintain equal intelligibility at a 70% level, in part due to its stronger noise reduction and a higher required speech level. In regard to hearing protection performance, the ANC device exhibited a distinct advantage, resulting in lower projected OSHA daily noise doses than either passive headset, with the largest increment in protection occurring in the low frequency-biased tank noise.


2005 ◽  
Vol 36 (11) ◽  
pp. 9-17 ◽  
Author(s):  
Mika Oinonen ◽  
Harri Raittinen ◽  
Markku Kivikoski

The modest low-frequency attenuation of the conventional passive hearing protector can be improved electronically by active noise cancellation techniques. This paper presents the theory and some of the actual limitations of an active noise cancellation hearing protector. Three prototypes with similar types of controller, but with different mechanical construction were made and their performance was measured. The electronics of the system were implemented using analog electronics and feedback construction. The measurement results were compared with the results of an equivalent passive hearing protector with no internal electronics and with an intact earcup. The results show that the integration of the controller inside the earcups degrades the passive attenuation of the hearing protector at frequencies below 200 Hz. With proper design, an active noise cancellation hearing protector can still have 15 dB more noise attenuation at 100 - 200 Hz range than an equivalent passive hearing protector.


2016 ◽  
Vol 28 (8) ◽  
pp. 1050-1058
Author(s):  
Yong Chen ◽  
Sebastian Ghinet ◽  
Andrew Price ◽  
Viresh Wickramasinghe ◽  
Anant Grewal

High noise levels in the helicopter cabin adversely affect aircrew communication and reduce comfort in the short-term and may lead to hearing loss in the long-term if flight helmets cannot provide sufficient protection to the aircrew. A cabin noise exposure survey has been performed on a Royal Canadian Air Force CH-147F Chinook heavy lift helicopter to evaluate the noise environment and noise protection performance of the flight helmet. Investigation results showed that the low-frequency noise attenuation provided by the Royal Canadian Air Force flight helmet was marginal in high-speed flight conditions that generate loud cabin noise. Therefore, in-canal earphone integrated with active noise cancellation capability was investigated to provide enhanced noise protection and improve clarity in voice communication. Simulation and proof-of-concept test results verified that active noise cancellation in-canal earphones can serve as a feasible technical solution to provide enhanced noise attenuation to mitigate the low-frequency N/rev tonal noise generated by the aerodynamic pressure from the helicopter rotor blades.


2013 ◽  
Vol 7 (6) ◽  
pp. 497-504 ◽  
Author(s):  
Markus Guldenschuh ◽  
Robert Höldrich

2021 ◽  
Author(s):  
Sattwik Basu ◽  
Jeffrey Tackett ◽  
David Trumpy ◽  
Adam Walt ◽  
Santosh Adari

Sign in / Sign up

Export Citation Format

Share Document