Thermodynamic properties of liquid alloys Ni-Eu and Ni-Yb

2014 ◽  
Vol 88 (9) ◽  
pp. 1463-1471 ◽  
Author(s):  
V. V. Berezutskii ◽  
M. A. Shevchenko ◽  
M. I. Ivanov ◽  
V. S. Sudavtsova
2021 ◽  
pp. 116791
Author(s):  
A. Dębski ◽  
S. Terlicka ◽  
W. Gąsior ◽  
M. Saternus ◽  
A. Fornalczyk

BIBECHANA ◽  
2015 ◽  
Vol 13 ◽  
pp. 60-71
Author(s):  
RP Koirala ◽  
BP Singh ◽  
IS Jha ◽  
D Adhikari

A comparative study has been carried out to understand the concentration dependence of thermodynamic properties such as, free energy of mixing, heat of mixing, entropy of mixing, activity  and microscopic properties, such as concentration fluctuation in long wavelength limit  and Warren-Cowley short range order parameter  of  In-based three liquid alloys (In-Pb , In-Tl and In-Zn) on the basis of self-association model. The analysis reveals that self-association model successfully explains the observed properties of the liquid alloys.  Positive deviation of the thermodynamic properties of the alloys from the Raoultian solution behaviour indicates that the alloys are weakly segregating in nature. The comparative assessment of the interaction energy and the microscopic properties suggests that the degree of segregation is greatest in In-Zn alloy and comparable in In-Pb and In-Tl alloys.BIBECHANA 13 (2016) 60-71


2005 ◽  
Vol 78 (1) ◽  
pp. 57-63
Author(s):  
A. G. Morachevskii ◽  
L. B. Tsymbulov ◽  
E. Yu. Kolosova ◽  
L. Sh. Tsemekhman

2009 ◽  
Vol 2009 (2) ◽  
pp. 107-112 ◽  
Author(s):  
N. V. Podoprigora ◽  
V. S. Sudavtsova

1981 ◽  
Vol 15 (10) ◽  
pp. 1087-1089 ◽  
Author(s):  
S.N. Khanna ◽  
P. Hicter ◽  
F. Cyrot-Lackmann

Author(s):  
N. Kotova ◽  
N. Usenko ◽  
N. Golovata

The features of the component interaction in liquid alloys of ternary Al-Ge-3d-Me systems (Me = Mn, Fe, Ni, Cu) are described. A joint analysis of the concentration dependences of the enthalpies of mixing of liquid alloys previously obtained by the authors via high-temperature calorimetry, and also of the phase diagrams of the constituent binary systems was carried out. The relationship between the enthalpy values and the type of short-range ordering in liquid alloys of the studied systems was established. The visual similarity of the topology of the projections of ΔmH isolines of the Al-Ge-Fe (Ni, Cu) liquid alloys and a completely different course of the isolines of the enthalpies of mixing for the liquid Al-Ge-Mn alloys are established. The changes in the absolute values of the ΔmHmin from system to system are observed. The enthalpies are approximately the same for the Al-Ge-Mn and Al-Ge-Fe systems (about -20 kJ⋅mol-1), they increase significantly from Al-Ge-Fe to Al-Ge-Ni (-50 kJ⋅mol-1), and then decrease substantially towards the Al-Ge-Cu system (-15 kJ⋅mol-1). For the Al-Ge-Mn (Fe, Ni, Cu) liquid alloys the lines of extreme interaction are located near the 3d-corner of the concentration triangle. These lines connect the compositions of the most stable intermetallic compounds in binary Al(Ge)-Mn(Fe, Ni, Cu) systems. It has been shown that the thermodynamic properties of Al-Ge-Fe (Ni, Cu) liquid alloys are mainly determined by the pair interaction of the components of the constituent binary Al-Fe(Ni, Cu) and Ge-Fe(Ni, Cu) systems, the influence of Al-Fe(Ni, Cu) systems being prevailed. For the Al-Ge-Mn system, the interaction of components in the Ge-Mn binary system gives the main contribution to the thermodynamic properties of the ternary system. The Al-Ge-Mn (Fe, Cu) systems are characterized by significantly lower absolute values of the heats of alloy formation compared to the Al-Ge-Ni one. The specified characteristics of component interaction in the ternary systems under consideration and different values of the enthalpies of mixing are determined by the peculiarities and regular changes of the electronic structure of 3d metals across the 3d series from Mn to Cu.


2005 ◽  
Vol 70 (1) ◽  
pp. 9-20 ◽  
Author(s):  
Dragan Manasijevic ◽  
Dragana Zivkovic ◽  
Katayama Iwao ◽  
Zivan Zivkovic

The results of the calculation of the thermodynamic properties for liquid Ga-Sb-Tl alloys at the temperature 1073 K are presented in this paper. Initially, the most appropriate thermodynamic model for the investigated system was selected. Based on a comparison of the values calculated by different geometric models (Kohler, Muggianu, Toop, Hillert, Chou) with the existing experimental based data, asymmetric models of calculation were determined to give the best results. The asymmetric nature of the investigated ternary system was additionally confirmed by the Chou similarity coefficient concept. For these reasons, further complete thermodynamic calculations were performed according to the Hillert model in five sections of the ternary Ga-Sb-Tl system from each corner with the mole ratio of other two components being 9:1; 7:3; 5:5; 3:7 and 1:9. The obtained results include integral excess Gibbs energy dependences on composition for all the investigated sections. The calculated activity values at 1073 K for all components are given in the form of isoactivity diagrams. Comparison between the calculated and experimentally obtained gallium activities shows good agreement.


1970 ◽  
Vol 6 (6) ◽  
pp. 16-18
Author(s):  
SK Chakrabarti ◽  
IS Jha ◽  
BP Singh

The large asymmetry observed in the properties of mixing of indium-sodium liquid alloy is discussed on the basis of quasi-lattice chemical model. A special attention is given to the concentration dependence of free energy of mixing, entropy of mixing and heat of mixing. The results explain the observed asymmetry in the properties of mixing of InNa liquid alloys around equi-atomic composition. Key words: Complex forming alloys; Binary liquid alloys; Quasi-lattice model; Thermodynamic properties. DOI: 10.3126/sw.v6i6.2627 Scientific World, Vol. 6, No. 6, July 2008 16-18


Sign in / Sign up

Export Citation Format

Share Document