Modeling the Cathodic Region in Crevice Corrosion under a Thin Electrolyte Film Including Particulates

Small amounts of nickel are added to titanium to improve the crevice corrosion resistance but this results in an alloy which has sheet fabrication difficulties and is subject to the formation of large Ti2Ni precipitates. These large precipitates can serve as local corrosion sites; but in a smaller more widely dispersed form, they can have a beneficial effect on crevice corrosion resistance. The purpose of the present work is to show that the addition of a small amount of Mo to the Ti-1.5Ni alloy reduces the Ti2Ni precipitate size and produces a more elongated grained microstructure. It has recently been reported that small additions of Mo to Ti-0.8 to lw/o Ni alloys produce good crevice corrosion resistance and improved fabrication properties.

Download Full-text

ESPI and Digital Speckle Correlation Applied to Inspection of Crevice Corrosion on Aging Aircraft

Research in Nondestructive Evaluation ◽

10.1080/09349849808968135 ◽

1998 ◽

Vol 10 (1) ◽

pp. 63-73 ◽

Cited By ~ 1

Author(s):

F. Jin ◽

F. P. Chiang

Keyword(s):

Crevice Corrosion ◽

Speckle Correlation ◽

Aging Aircraft ◽

Digital Speckle ◽

Digital Speckle Correlation

Download Full-text

ALLEGHENY LUDLUM AL276

Alloy Digest ◽

10.31399/asm.ad.ni0497 ◽

1996 ◽

Vol 45 (1) ◽

Keyword(s):

Corrosion Resistance ◽

High Temperature ◽

Power Plant ◽

Physical Properties ◽

Surface Treatment ◽

Tensile Properties ◽

Crevice Corrosion ◽

Heat Treating ◽

Chemical Plants ◽

Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

Download Full-text

NICROFER 5716 HMoW

Alloy Digest ◽

10.31399/asm.ad.ni0324 ◽

1985 ◽

Vol 34 (11) ◽

Keyword(s):

Corrosion Resistance ◽

Physical Properties ◽

Stress Corrosion ◽

Tensile Properties ◽

Stress Corrosion Cracking ◽

Crevice Corrosion ◽

Corrosion Cracking ◽

Low Carbon ◽

Nickel Chromium ◽

Corrosion Pitting

Abstract NICROFER 5716 HMoW is a nickel-chromium-molybdenum alloy with tungsten and extremely low carbon and silicon contents. It has excellent resistance to crevice corrosion, pitting and stress-corrosion cracking. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Ni-324. Producer or source: Vereingte Deutsche Metallwerke AG.

Download Full-text

ALLEGHENY LUDLUM AL 22

Alloy Digest ◽

10.31399/asm.ad.ni0559 ◽

2000 ◽

Vol 49 (3) ◽

Keyword(s):

Corrosion Resistance ◽

Physical Properties ◽

Tensile Properties ◽

Nickel Alloy ◽

Crevice Corrosion ◽

High Nickel ◽

Corrosion Pitting ◽

High Nickel Alloy

Abstract AL-22 is a wrought 22Cr-13.5Mo-3W-4Fe high-nickel alloy with outstanding and versatile corrosion resistance. The alloy is available in plate and is used where excellent corrosion, pitting, or crevice corrosion resistance is needed. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-559. Producer or source: Allegheny Ludlum Corporation.

Download Full-text

BÖHLER A911SA EXTRA

Alloy Digest ◽

10.31399/asm.ad.ss1119 ◽

2012 ◽

Vol 61 (4) ◽

Keyword(s):

Fracture Toughness ◽

Stainless Steel ◽

High Temperature ◽

Physical Properties ◽

Stress Corrosion Cracking ◽

Crevice Corrosion ◽

Heat Treating ◽

Temperature Performance ◽

Resistance To Stress ◽

Specialty Metals

Abstract Böhler (or Boehler) A911 is a super duplex ferritic-austenitic chromium-nickel-molybdenum stainless steel with excellent resistance to stress-corrosion cracking, pitting, and crevice corrosion. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SS-1119. Producer or source: Böhler-Uddeholm Specialty Metals Inc..

Download Full-text

SEA CURE

Alloy Digest ◽

10.31399/asm.ad.ss0364 ◽

1979 ◽

Vol 28 (5) ◽

Keyword(s):

Stainless Steel ◽

Corrosion Resistance ◽

Physical Properties ◽

Tensile Properties ◽

Ferritic Stainless Steel ◽

High Resistance ◽

Brackish Water ◽

Crevice Corrosion ◽

Heat Treating

Abstract SEA-CURE is a ferritic stainless steel designed to provide high resistance to pitting and crevice corrosion in condensers cooled by saline or brackish water. It is used for condenser tubes and has great potential for many other uses. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-364. Producer or source: Trent Tube.

Download Full-text