Lead Dioxide Anode for Commercial Use

1958 ◽  
Vol 105 (2) ◽  
pp. 100 ◽  
Author(s):  
J. C. Grigger ◽  
H. C. Miller ◽  
F. D. Loomis
Keyword(s):  
Lead Dioxide ◽  
Commercial Use ◽  
Lead Dioxide Anode

The Lead Dioxide Anode. II. The Kinetics and Participation of the Lead Dioxide Electrode in Electrochemical Oxidation Reactions in Sulfuric Acid

1989 ◽  
Vol 42 (9) ◽  
pp. 1527 ◽  
Author(s):  
TH Randle ◽  
AT Kuhn
Keyword(s):  
Sulfuric Acid ◽  
Electrochemical Oxidation ◽  
Maximum Rate ◽  
Lead Dioxide ◽  
Chemical Oxidation ◽  
Oxidation Reactions ◽  
Electrochemical Regeneration ◽  
Electrode Surfaces ◽  
Lead Dioxide Electrode ◽  
Lead Dioxide Anode

Lead dioxide is a strong oxidizer in sulfuric acid, consequently electrochemical oxidation of solution species at a lead dioxide anode may occur by a two-step, C-E process (chemical oxidation of solution species by PbO2 followed by electrochemical regeneration of the reduced lead dioxide surface). The maximum rate of each step has been determined in sulfuric acid for specified lead dioxide surfaces and compared with the rates observed for the electrochemical oxidation of cerium(III) and manganese(II) on the same electrode surfaces. While the rate of electrochemical oxidation of a partially reduced PbO2 surface may be sufficient to support the observed rates of CeIII and MnII oxidation at the lead dioxide anode, the rate of chemical reaction between PbO2 and the reducing species is not. Hence it is concluded that the lead dioxide electrode functions as a simple, 'inert' electron-transfer agent during the electrochemical oxidation of CellI and MnII in sulfuric acid. In general, it will most probably be the rate of the chemical step which determines the feasibility or otherwise of the C-E mechanism.

Electrocatalytic degradation of the herbicide metamitron using lead dioxide anode: influencing parameters, intermediates, and reaction pathways

2019 ◽  
Vol 26 (26) ◽  
pp. 27032-27042 ◽  
Author(s):  
Yang Yang ◽  
Leilei Cui ◽  
Mengyao Li ◽  
Liman Zhang ◽  
Yingwu Yao
Keyword(s):  
Lead Dioxide ◽  
Reaction Pathways ◽  
Electrocatalytic Degradation ◽  
Lead Dioxide Anode ◽  
Influencing Parameters

The Lead Dioxide Anode. I. A Kinetic Study of the Electrolytic Oxidation of Cerium(III) and Manganese(II) in Sulfuric Acid at the Lead Dioxide Electrode

1989 ◽  
Vol 42 (2) ◽  
pp. 229 ◽  
Author(s):  
TH Randle ◽  
AT Kuhn
Keyword(s):  
Sulfuric Acid ◽  
Platinum Electrode ◽  
Lead Dioxide ◽  
Chemical Oxidation ◽  
Oxidation Reactions ◽  
Heterogeneous Chemical ◽  
Lead Dioxide Anode ◽  
Direct Support ◽  
Electrolytic Oxidation ◽  
Step Mechanism

The electrolytic oxidation reactions of cerium(III) and manganeseII) in sulfuric acid have been used as probes to investigate the mechanism of the lead dioxide anode. The kinetics observed for such reactions at the lead dioxide surface provide no direct support for the proposal that the lead dioxide anode functions by a sequential 'two-step' mechanism (heterogeneous chemical oxidation of solution species followed by electrochemical oxidation of the reduced lead dioxide surface); rather the kinetics show characteristics similar to those observed previously for the oxidation of cerium(III) and manganese(II) at the platinum electrode, suggesting that the lead dioxide surface functions as a simple, 'inert' electron-transfer agent.

Oxygen overpotential of graphite-substrate lead dioxide anode

1965 ◽  
Vol 10 (12) ◽  
pp. 1185-1187 ◽  
Author(s):  
M.S.V. Pathy ◽  
H.V.K. Udupa
Keyword(s):  
Lead Dioxide ◽  
Graphite Substrate ◽  
Lead Dioxide Anode

Long Life Modified Lead Dioxide Anode for Organic Wastewater Treatment:  Electrochemical Characteristics and Degradation Mechanism

2005 ◽  
Vol 39 (1) ◽  
pp. 363-370 ◽  
Author(s):  
Minghua Zhou ◽  
Qizhou Dai ◽  
Lecheng Lei ◽  
Chun'an Ma ◽  
Dahui Wang
Keyword(s):  
Wastewater Treatment ◽  
Degradation Mechanism ◽  
Lead Dioxide ◽  
Electrochemical Characteristics ◽  
Lead Dioxide Anode ◽  
Long Life ◽  
Organic Wastewater

The effect of Cobalt on the Kinetics of Oxygen evolution at a Lead Dioxide anode in Sulphuric Acid

1959 ◽  
Vol 12 (2) ◽  
pp. 127 ◽  
Author(s):  
DFA Koch
Keyword(s):  
Sulphuric Acid ◽  
Oxygen Evolution ◽  
Current Density ◽  
Lead Dioxide ◽  
Kinetic Constants ◽  
Kcal Mole ◽  
Lead Dioxide Anode ◽  
Kinetics Of ◽  
Evolution Of Oxygen ◽  
Rate Determining Steps

The overpotential (n)-log current density (log i) curves for the evolution of oxygen at a lead dioxide anode in 2N H2SO4 both in the absence and presence of cobaltous sulphate in solution have been used to determine the electrode kinetic constants α ; i0 for a series of temperatures and also ΔH0*:. At 25 �C in the absence of cobalt α=O.59, i0= 10-11, and ΔH0*= 15 kcal mole-1 When 13 mg/l cobaltous sulphate is added α= 1.0, i0= 10-15, and ΔH0*:=29 kcal mole-1. Possible mechanisms for the reaction are discussed on the basis of these values and the rate determining steps suggested (where M represents the PbO2 surface) are M +H2O =MOH +H+ +e in the absence of cobalt and 2CoOH++ = 2Co++ +H2O + O in its presence.

Carbon-Based Cerium(III)-Doped Lead Dioxide Anode

2014 ◽  
Vol 61 (30) ◽  
pp. 1-12
Author(s):  
I. u. Haque
Keyword(s):  
Lead Dioxide ◽  
Lead Dioxide Anode ◽  
Carbon Based

Electrochemical Oxidation of Environmentally Persistent Perfluorooctane Sulfonate by a Novel Lead Dioxide Anode

2016 ◽  
Vol 213 ◽  
pp. 358-367 ◽  
Author(s):  
Qiongfang Zhuo ◽  
Meiqing Luo ◽  
Qingwei Guo ◽  
Gang Yu ◽  
Shubo Deng ◽  
...  
Keyword(s):  
Electrochemical Oxidation ◽  
Lead Dioxide ◽  
Perfluorooctane Sulfonate ◽  
Lead Dioxide Anode
Sign in / Sign up

Export Citation Format

Share Document