Bath Conditions Role in Promoting Corrosion Protection on Aluminum Alloy using Rare Earth Conversion Coatings

2011 ◽  
Vol 159 (1) ◽  
pp. C40-C57 ◽  
Author(s):  
S. B. Brachetti-Sibaja ◽  
M. A. Domínguez-Crespo ◽  
A. M. Torres-Huerta ◽  
W. de la Cruz-Hernández ◽  
E. Onofre-Bustamante
2000 ◽  
Vol 284 (1-2) ◽  
pp. 56-63 ◽  
Author(s):  
Yu Xingwen ◽  
Cao Chunan ◽  
Yao Zhiming ◽  
Zhou Derui ◽  
Yin Zhongda

2014 ◽  
Vol 44 (10) ◽  
pp. 1093-1105 ◽  
Author(s):  
Stephan V. Kozhukharov ◽  
Olaia F. Acuña ◽  
Maria. S. Machkova ◽  
Vladimir S. Kozhukharov

Molecules ◽  
2021 ◽  
Vol 26 (24) ◽  
pp. 7413
Author(s):  
Mohammad Reza Shishesaz ◽  
Moslem Ghobadi ◽  
Najmeh Asadi ◽  
Alireza Zarezadeh ◽  
Ehsan Saebnoori ◽  
...  

The effects of surface pretreatments on the cerium-based conversion coating applied on an AA5083 aluminum alloy were investigated using a combination of scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), polarization testing, and electrochemical impedance spectroscopy. Two steps of pretreatments containing acidic or alkaline solutions were applied to the surface to study the effects of surface pretreatments. Among the pretreated samples, the sample prepared by the pretreatment of the alkaline solution then acid washing presented higher corrosion protection (~3 orders of magnitude higher than the sample without pretreatment). This pretreatment provided a more active surface for the deposition of the cerium layer and provided a more suitable substrate for film formation, and made a more uniform film. The surface morphology of samples confirmed that the best surface coverage was presented by alkaline solution then acid washing pretreatment. The presence of cerium in the (EDS) analysis demonstrated that pretreatment with the alkaline solution then acid washing resulted in a higher deposition of the cerium layer on the aluminum surface. After selecting the best surface pretreatment, various deposition times of cerium baths were investigated. The best deposition time was achieved at 10 min, and after this critical time, a cracked film formed on the surface that could not be protective. The corrosion resistance of cerium-based conversion coatings obtained by electrochemical tests were used for training three computational techniques (artificial neural network (ANN), adaptive neuro-fuzzy inference system (ANFIS), and support vector machine regression (SVMR)) based on Pretreatment-1 (acidic or alkaline cleaning: pH (1)), Pretreatment-2 (acidic or alkaline cleaning: pH (2)), and deposition time in the cerium bath as an input. Various statistical criteria showed that the ANFIS model (R2 = 0.99, MSE = 48.83, and MAE = 3.49) could forecast the corrosion behavior of a cerium-based conversion coating more accurately than other models. Finally, due to the robust performance of ANFIS in modeling, the effect of each parameter was studied.


2000 ◽  
Vol 42 (2) ◽  
pp. 275-288 ◽  
Author(s):  
Amy L. Rudd ◽  
Carmel B. Breslin ◽  
Florian Mansfeld

Author(s):  
A.S. Koryakin ◽  
◽  
Yu.A. Kuzenkov ◽  
S.V. Oleynik ◽  
V.L. Voytitskiy ◽  
...  

Author(s):  
A.S. Koriakin ◽  
◽  
Yu.A. Kuzenkov ◽  
S.V. Oleynik ◽  
V.L. Voytitsky ◽  
...  

2008 ◽  
Vol 53 (26) ◽  
pp. 7760-7768 ◽  
Author(s):  
A. Conde ◽  
M.A. Arenas ◽  
A. de Frutos ◽  
J. de Damborenea

Sign in / Sign up

Export Citation Format

Share Document