scholarly journals Bezier Curves for Solving Fredholm Integral Equations of the Second Kind

2014 ◽  
Vol 2014 ◽  
pp. 1-6
Author(s):  
F. Ghomanjani ◽  
M. H. Farahi ◽  
A. Kılıçman

The Bezier curves are presented to estimate the solution of the linear Fredholm integral equation of the second kind. A direct algorithm for solving this problem is given. We have chosen the Bezier curves as piecewise polynomials of degreenand determine Bezier curves on [0, 1] byn+1control points. Numerical examples illustrate that the algorithm is applicable and very easy to use.

2010 ◽  
Vol 2 (2) ◽  
pp. 264-272 ◽  
Author(s):  
A. Shirin ◽  
M. S. Islam

In this paper, Bernstein piecewise polynomials are used to solve the integral equations numerically. A matrix formulation is given for a non-singular linear Fredholm Integral Equation by the technique of Galerkin method. In the Galerkin method, the Bernstein polynomials are used as the approximation of basis functions. Examples are considered to verify the effectiveness of the proposed derivations, and the numerical solutions guarantee the desired accuracy.  Keywords: Fredholm integral equation; Galerkin method; Bernstein polynomials. © 2010 JSR Publications. ISSN: 2070-0237 (Print); 2070-0245 (Online). All rights reserved. DOI: 10.3329/jsr.v2i2.4483               J. Sci. Res. 2 (2), 264-272 (2010) 


2018 ◽  
Vol 2018 ◽  
pp. 1-9
Author(s):  
Meilan Sun ◽  
Chuanqing Gu

The function-valued Padé-type approximation (2DFPTA) is used to solve two-dimensional Fredholm integral equation of the second kind. In order to compute 2DFPTA, a triangle recursive algorithm based on Sylvester identity is proposed. The advantage of this algorithm is that, in the process of calculating 2DFPTA to avoid the calculation of the determinant, it can start from the initial value, from low to high order, and gradually proceeds. Compared with the original two methods, the numerical examples show that the algorithm is effective.


2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
F. Ghomanjani ◽  
A. Kılıçman ◽  
S. Effati

A method is proposed to determine the numerical solution of system of linear Volterra integrodifferential equations (IDEs) by using Bezier curves. The Bezier curves are chosen as piecewise polynomials of degreen, and Bezier curves are determined on[t0, tf ]by n+1control points. The efficiency and applicability of the presented method are illustrated by some numerical examples.


Author(s):  
M. Tahami ◽  
A. Askari Hemmat ◽  
S. A. Yousefi

In one-dimensional problems, the Legendre wavelets are good candidates for approximation. In this paper, we present a numerical method for solving two-dimensional first kind Fredholm integral equation. The method is based upon two-dimensional linear Legendre wavelet basis approximation. By applying tensor product of one-dimensional linear Legendre wavelet we construct a two-dimensional wavelet. Finally, we give some numerical examples.


Author(s):  
S. ABBASBANDY ◽  
T. ALLAHVIRANLOO

In this work, the Adomian decomposition(AD) method is applied to the Fuzzy system of linear Fredholm integral equations of the second kind(FFIE). First the crisp Fredholm integral equation is solved by AD method and then the crisp solution is fuzzified by extension principle. The proposed algorithm is illustrated by solving a numerical example.


2021 ◽  
Vol 1 (4) ◽  
pp. 1-7
Author(s):  
Vladimir Uskov

The article is devoted to the study of a system of two inhomogeneous Fredholm integral equations of the first kind with two required functions depending on one variable. Integral equations describe the restoration of a blurred image, production costs, etc. Fredholm integral equations with one desired function have been considered in many works, but relatively few works have been devoted to systems of such equations. The questions of stability for the solution of systems and the construction of a regularizing system of equations were investigated, but the solution was not constructed in an explicit form. In this paper, the kernels depend on two variables. The case is considered: in the kernels and inhomogeneities, the variables are separated in the equations; these functions are decomposed on the basis of two functions on the interval of integration. Examples of basic functions are given. A condition is determined under which the system has a unique solution in the chosen basis, formulated as a theorem. The solution is found in the form of an expansion in this basis. To illustrate the results obtained, an example is considered


2018 ◽  
Vol 85 (1-2) ◽  
pp. 53 ◽  
Author(s):  
Ahmed A. Hamoud ◽  
Kirtiwant P. Ghadle

In this paper, a modied Adomian decomposition method has been applied to approximate the solution of the fuzzy Volterra-Fredholm integral equations of the first and second Kind. That, a fuzzy Volterra-Fredholm integral equation has been converted to a system of Volterra-Fredholm integral equations in crisp case. We use MADM to find the approximate solution of this system and hence obtain an approximation for the fuzzy solution of the Fuzzy Volterra-Fredholm integral equation. A nonlinear evolution model is investigated. Moreover, we will prove the existence, uniqueness of the solution and convergence of the proposed method. Also, some numerical examples are included to demonstrate the validity and applicability of the proposed technique.


2017 ◽  
Vol 65 (1) ◽  
pp. 61-66
Author(s):  
MM Hasan ◽  
MA Matin

In this paper, we present a numerical method to solve a non-linear Fredholm integral equations. We intend to approximate the solution of this equation by Newton-Kantorovich-quadrature method and Adomian Decomposition method compare both the methods accurately for solving the non-linear Fredholm integral equation. Dhaka Univ. J. Sci. 65(1): 61-66, 2017 (January)


Author(s):  
L. L. Hart ◽  
M. O. Vasenyn ◽  
N. V. Baleyko

The most common approximate methods for solving the linear Fredholm integral equation of the second kind are investigated, corresponding computational schemes are developed, and the order of their accuracy is estimated. For experiments, a software implementation of the selected methods was executed in the Matlab programming language. A qualitative comparative analysis of the results of the implemented algorithms was carried out on the example of solving specific problems. The problems of modeling complex physical processes are one of the most advanced and important ones throughout human history and today. One of the tools that helps to create a model of a process or phenomenon is integral equations. It is a very large class of problems and equations, consisting of many varieties. One of the types of equations of this class is the Fredholm integral equations of the second kind, because these equations help to solve problems such as the analysis of dynamic machines and mechanisms in mechanics, the problem of self-oscillations of aircraft wings in aerodynamics, the problem of forced vibrations of a string, the problem of determining the critical criticality shaft rotation and a huge range of tasks in the fields of electrical engineering, physics, auto-regulation, astronomy, acoustics and more. However often these processes are quite complex, and it is very difficult to solve the integral equation explicitly. Therefore, it is advisable to make a comparative analysis of approximate methods for solving Fredholm second kind equations and to conclude in which case one or the other method produces the best results. The results of the studies can be applied to the modeling of physical oscillation or regulation processes that require the solution of a linear Fredholm equation of the second kind with a complex kernel and a free term, which makes it impossible to find the exact solution of the equation. 


Sign in / Sign up

Export Citation Format

Share Document