scholarly journals Coyote multi-objective optimization algorithm for optimal location and sizing of renewable distributed generators

2021 ◽  
Vol 11 (2) ◽  
pp. 975
Author(s):  
E. M. Abdallah ◽  
M. I. El Sayed ◽  
M. M. Elgazzar ◽  
Amal A. Hassan
Keyword(s):  
Optimization Algorithm ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Reducing Power ◽  
Stability Index ◽  
Optimal Location ◽  
Voltage Profile ◽  
Power Losses ◽  
Voltage Stability Index ◽  
Distributed Generators

Research on the integration of renewable distributed generators (RDGs) in radial distribution systems (RDS) is increased to satisfy the growing load demand, reducing power losses, enhancing voltage profile, and voltage stability index (VSI) of distribution network. This paper presents the application of a new algorithm called ‘coyote optimization algorithm (COA)’ to obtain the optimal location and size of RDGs in RDS at different power factors. The objectives are minimization of power losses, enhancement of voltage stability index, and reduction total operation cost. A detailed performance analysis is implemented on IEEE 33 bus and IEEE 69 bus to demonstrate the effectiveness of the proposed algorithm. The results are found to be in a very good agreement.

Optimization of Real Power Loss and Voltage Stability Index for Distribution Systems with Distributed Generation

2017 ◽  
Vol 33 ◽  
pp. 100-114 ◽  
Author(s):  
Mostafa Elshahed ◽  
Mahmoud Dawod ◽  
Zeinab H. Osman
Keyword(s):  
Genetic Algorithm ◽  
Distributed Generation ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Reactive Power ◽  
Optimization Problems ◽  
Stability Index ◽  
Mixed Integer ◽  
Voltage Profile ◽  
Voltage Stability Index

Integrating Distributed Generation (DG) units into distribution systems can have an impact on the voltage profile, power flow, power losses, and voltage stability. In this paper, a new methodology for DG location and sizing are developed to minimize system losses and maximize voltage stability index (VSI). A proper allocation of DG has to be determined using the fuzzy ranking method to verify best compromised solutions and achieve maximum benefits. Synchronous machines are utilized and its power factor is optimally determined via genetic optimization to inject reactive power to decrease system losses and improve voltage profile and VSI. The Augmented Lagrangian Genetic Algorithm with nonlinear mixed-integer variables and Non-dominated Sorting Genetic Algorithm have been implemented to solve both single/multi-objective function optimization problems. For proposed methodology effectiveness verification, it is tested on 33-bus and 69-bus radial distribution systems then compared with previous works.

scholarly journals Optimal Allocation of DSTATCOM in Distribution Network Using Whale Optimization Algorithm

2018 ◽  
Vol 8 (5) ◽  
pp. 3445-3449 ◽  
Author(s):  
P. Balamurugan ◽  
T. Yuvaraj ◽  
P. Muthukannan
Keyword(s):  
Optimization Algorithm ◽  
Distribution Systems ◽  
Optimal Allocation ◽  
Stability Index ◽  
Distribution Networks ◽  
Whale Optimization Algorithm ◽  
Voltage Profile ◽  
Power Losses ◽  
Whale Optimization ◽  
Static Compensator

This paper deals with a new approach implemented to decrease power losses and improve voltage profile in distribution networks using Distribution STATic COMpensator (DSTATCOM). DSTATCOM location can be determined by the voltage stability index (VSI) and sizing can be identified by nature inspired, recently developed whale optimization algorithm (WOA). To check efficacy, the proposed technique is tested on two standard buses: Indian rural electrification 28-bus and IEEE 69-bus distribution systems. Obtained results show that optimal allocation of DSTATCOM effectively reduces power losses and improves voltage profile.

scholarly journals Whale Optimization Algorithm Based Technique for Distributed Generation Installation in Distribution System

2018 ◽  
Vol 7 (3) ◽  
pp. 442-449
Author(s):  
Mohd Nurulhady Morshidi ◽  
Ismail Musirin ◽  
Siti Rafidah Abdul Rahim ◽  
Mohd Rafi Adzman ◽  
Mohamad Hatta Hussain
Keyword(s):  
Distributed Generation ◽  
Optimization Algorithm ◽  
Distribution System ◽  
Voltage Stability ◽  
Stability Index ◽  
Transmission System ◽  
Whale Optimization Algorithm ◽  
Voltage Profile ◽  
Voltage Stability Index ◽  
Whale Optimization

This paper presents Whale Optimization Algorithm (WOA) Based Technique for Distributed Generation Installation in Transmission System. In this study, WOA optimization engine is developed for the installation of Distributed Generation (DG). Prior to the optimization process, a pre-developed voltage stability index termed Fast Voltage Stability Index (FVSI) was used as an indicator to identify the location for the DG to be installed in the system. Meanwhile, for sizing the DG WOA is employed to identify the optimal sizing. By installing DG in the transmission system, voltage stability and voltage profile can be improved, while power losses can be minimized. The proposed algorithm was tested on 30-bus radial distribution network. Results obtained from the EP were compared with firefly algorithm (FA); indicating better results. This highlights the strength of WOA over FA in terms of minimizing total losses.

Application of UPFC for enhancement of voltage profile and minimization of losses using Fast Voltage Stability Index (FVSI)

2012 ◽  
Vol 61 (2) ◽  
pp. 239-250 ◽  
Author(s):  
M. Kumar ◽  
P. Renuga
Keyword(s):  
Power System ◽  
Voltage Stability ◽  
Reactive Power ◽  
Optimization Technique ◽  
Optimal Solution ◽  
Stability Index ◽  
Test System ◽  
Unified Power Flow Controller ◽  
Voltage Profile ◽  
Voltage Stability Index

Application of UPFC for enhancement of voltage profile and minimization of losses using Fast Voltage Stability Index (FVSI)Transmission line loss minimization in a power system is an important research issue and it can be achieved by means of reactive power compensation. The unscheduled increment of load in a power system has driven the system to experience stressed conditions. This phenomenon has also led to voltage profile depreciation below the acceptable secure limit. The significance and use of Flexible AC Transmission System (FACTS) devices and capacitor placement is in order to alleviate the voltage profile decay problem. The optimal value of compensating devices requires proper optimization technique, able to search the optimal solution with less computational burden. This paper presents a technique to provide simultaneous or individual controls of basic system parameter like transmission voltage, impedance and phase angle, thereby controlling the transmitted power using Unified Power Flow Controller (UPFC) based on Bacterial Foraging (BF) algorithm. Voltage stability level of the system is defined on the Fast Voltage Stability Index (FVSI) of the lines. The IEEE 14-bus system is used as the test system to demonstrate the applicability and efficiency of the proposed system. The test result showed that the location of UPFC improves the voltage profile and also minimize the real power loss.

Voltage Stability Index of Radial Distribution Networks by Considering Distributed Generator for Different Types of Loads

2016 ◽  
Vol 5 (1) ◽  
pp. 1-22 ◽  
Author(s):  
Tapan Kumar Chattopadhyay ◽  
Sumit Banerjee ◽  
Chandan Kumar Chanda
Keyword(s):  
Stability Analysis ◽  
Radial Distribution ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Stability Index ◽  
Distribution Networks ◽  
Voltage Collapse ◽  
Distributed Generator ◽  
Voltage Stability Index ◽  
Different Types

The paper presents an approach on voltage stability analysis of distribution networks for loads of different types. A voltage stability index is proposed for identifying the node, which is most sensitive to voltage collapse. It is shown that the node, at which the value of voltage stability index is maximum, is more sensitive to voltage collapse. For the purpose of voltage stability analysis, constant power, constant current, constant impedance and composite load modeling are considered. Distributed generation can be integrated into distribution systems to meet the increasing load demand. It is seen that with the insertion of distributed generator (DG), load capability limit of the feeder has increased for all types of loads. By using this voltage stability index, one can measure the level of voltage stability of radial distribution systems and thereby appropriate action may be taken if the index indicates a poor level of stability. The effectiveness of the proposed method is demonstrated through two examples.

scholarly journals A Novel Analytical Approach for Optimal Placement and Sizing of Distributed Generations in Radial Electrical Energy Distribution Systems

2021 ◽  
Vol 13 (18) ◽  
pp. 10224
Author(s):  
Sasan Azad ◽  
Mohammad Mehdi Amiri ◽  
Morteza Nazari Heris ◽  
Ali Mosallanejad ◽  
Mohammad Taghi Ameli
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Reducing Power ◽  
Distribution Networks ◽  
Active Power ◽  
Optimal Placement ◽  
Power Losses ◽  
Active Power Losses

Considering the strong influence of distributed generation (DG) in electric distribution systems and its impact on network voltage losses and stability, a new challenge has appeared for such systems. In this study, a novel analytical algorithm is proposed to distinguish the optimal location and size of DGs in radial distribution networks based on a new combined index (CI) to reduce active power losses and improve system voltage profiles. To obtain the CI, active power losses and voltage stability indexes were used in the proposed approach. The CI index with sensitivity analysis was effective in decreasing power losses and improving voltage stability. Optimal DG size was determined based on a search algorithm to reduce active power losses. The considered scheme was examined through IEEE 12-bus and 33-bus radial distribution test systems (RDTS), and the obtained results were compared and validated in comparison with other available methods. The results and analysis verified the effectiveness of the proposed algorithm in reducing power losses and improving the distribution system voltage profiles by determining the appropriate location and optimal DG size. In IEEE 12 and 33 bus networks, the minimum voltage increased from 0.9434 p.u and 0.9039 p.u to 0.9907 p.u and 0.9402 p.u, respectively. Additionally, the annual cost of energy losses decreased by 78.23% and 64.37%, respectively.

Sign in / Sign up

Export Citation Format

Share Document