Solid-state complementary metal oxide semiconductor (CMOS)-compatible glucose fuel cells, with single-walled carbon nanotube (SWCNT) films and different amounts of carbon nanotube (wt%) were investigated. Those with a SWCNT content of 3 wt% were found to develop the highest open circuit
voltage (OCV) of 400 mV, together with a high electrical conductivity, a power density of 0.53 μW/cm2 and current density of 1.31 μA/cm2. Measurements were performed by dipping the anode into a 30 mM glucose solution. The OCV and power density increased
together with the fuel cell concentration. The developed fuel cell uses materials that are biocompatible with the human body (single-walled carbon nanotube-glucose). As a result, it was possible to attain an OCV of 400 mV with a single-walled carbon nanotube content of 3 wt% while improvements
in the performance of the CMOS-compatible glucose fuel cell were obtained, and the parameters affecting the performance of the fuel cell were identified. This bio-fuel cell was fabricated using CMOS semiconductor processes on a silicon wafer. These findings are significant to realizing mobile
or implantable devices that can be used for biomedical applications.
Recent progress in parallel fabrication of individual single walled carbon nanotube devices using dielectrophoresis