Accuracy of leg length and femoral offset restoration after total hip arthroplasty with the utilisation of an intraoperative calibration gauge

2019 ◽  
Vol 30 (3) ◽  
pp. 296-302 ◽  
Author(s):  
Oliver Enke ◽  
Yadin D Levy ◽  
Warwick JM Bruce
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Hip Dislocation ◽  
Leg Length ◽  
Femoral Offset ◽  
Measuring Device ◽  
X Ray ◽  
Total Hip ◽  
Hip Function ◽  
The Mean

Background: Offset and leg length (LL) restoration are critical for the achievement of a stable, well-functioning hip following total hip arthroplasty (THA). Several techniques are described in the literature, including a hip calibration gauge. We question whether meticulous preoperative planning of a specific surgical technique in combination with the utilisation of a calibration gauge can provide an accurate offset and LL restoration. Methods: Retrospective review of 101 unilateral THAs via a posterior approach by a single surgeon. Preoperative radiographic LL and offset were radiographically calculated. Intraoperatively prior to hip dislocation a calibration gauge was used to measure LL and offset with a pin inserted into the iliac crest acting as a static referencing point. All had pelvis x-ray performed 6 weeks postoperatively. A literature review was conducted to establish average postoperative LL/offset values for statistical comparison. Results: The average absolute postoperative leg-length discrepancy (LLD) was 2.51 mm compared to preoperatively 3.54 mm ( p = 0.018). A total of 93.1% and 100% had LLD of ⩽5 mm and ⩽10 mm, respectively. The mean postoperative offset difference was 2.39 mm. The investigated LLD and offset results were comparable with literature data of studies utilising an intraoperative measuring device. LLD was significantly decreased when compared to a free-hand technique (LLD 4.42 mm, p < 0.001). Conclusion: The technique utilising preoperative templating, intraoperative offset verification together with the use of hip calibration gauge yielded accurate LLD and offset restoration as in the literature. Precise offset restoration, which often is a neglected issue, can lead to better abductor vector restoration, hip function and less pain.

scholarly journals Value of 3D Preoperative Planning for Primary Total Hip Arthroplasty Based on Biplanar Weightbearing Radiographs

2019 ◽  
Vol 2019 ◽  
pp. 1-7 ◽  
Author(s):  
Y. Knafo ◽  
F. Houfani ◽  
B. Zaharia ◽  
F. Egrise ◽  
I. Clerc-Urmès ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Preoperative Planning ◽  
Femoral Stem ◽  
Leg Length ◽  
Femoral Offset ◽  
Postoperative Result ◽  
Total Hip ◽  
Planning Software ◽  
Navigated Surgery

Two-dimensional (2D) planning on standard radiographs for total hip arthroplasty may not be sufficiently accurate to predict implant sizing or restore leg length and femoral offset, whereas 3D planning avoids magnification and projection errors. Furthermore, weightbearing measures are not available with computed tomography (CT) and leg length and offset are rarely checked postoperatively using any imaging modality. Navigation can usually achieve a surgical plan precisely, but the choice of that plan remains key, which is best guided by preoperative planning. The study objectives were therefore to (1) evaluate the accuracy of stem/cup size prediction using dedicated 3D planning software based on biplanar radiographic imaging under weightbearing and (2) compare the preplanned leg length and femoral offset with the postoperative result. This single-centre, single-surgeon prospective study consisted of a cohort of 33 patients operated on over 24 months. The routine clinical workflow consisted of preoperative biplanar weightbearing imaging, 3D surgical planning, navigated surgery to execute the plan, and postoperative biplanar imaging to verify the radiological outcomes in 3D weightbearing. 3D planning was performed with the dedicated hipEOS® planning software to determine stem and cup size and position, plus 3D anatomical and functional parameters, in particular variations in leg length and femoral offset. Component size planning accuracy was 94% (31/33) within one size for the femoral stem and 100% (33/33) within one size for the acetabular cup. There were no significant differences between planned versus implanted femoral stem size or planned versus measured changes in leg length or offset. Cup size did differ significantly, tending towards implanting one size larger when there was a difference. Biplanar radiographs plus hipEOS planning software showed good reliability for predicting implant size, leg length, and femoral offset and postoperatively provided a check on the navigated surgery. Compared to previous studies, the predictive results were better than 2D planning on conventional radiography and equal to 3D planning on CT images, with lower radiation dose, and in the weightbearing position.

scholarly journals Staged reconstruction of unilateral neglected hip dislocation through total hip arthroplasty and subsequent intramedullary femoral lengthening

2021 ◽  
Author(s):  
Bjoern Vogt ◽  
Christoph Theil ◽  
Georg Gosheger ◽  
Adrien Frommer ◽  
Burkhard Moellenbeck ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Plate Fixation ◽  
Hip Dislocation ◽  
Leg Length ◽  
Total Hip ◽  
Femoral Lengthening ◽  
Shortening Osteotomy ◽  
Successful Approach ◽  
Staged Reconstruction

Abstract Background and purpose Total hip arthroplasty (THA) is a successful approach to treat unilateral symptomatic neglected hip dislocation (NHD). However, the extensive leg length discrepancy (LLD) can hereby only be partially corrected. In case of residual LLD of more than 2 cm, subsequent femoral lengthening can be considered. Patients/material/methods Retrospective analysis of clinical data and radiographs of five patients (age 38.1 (28–51) years) with unilateral NHD who underwent THA with (n  = 3) or without (n = 2) subtrochanteric shortening osteotomy (SSO) and secondary intramedullary femoral lengthening through a retrograde magnetically-driven lengthening nail (follow-up 18.4 (15–27) months). Results LLD was 51.0 (45–60) mm before and 37.0 (30–45) mm after THA. Delayed bone union at one SSO site healed after revision with autologous bone grafting and plate fixation. Subsequent lengthening led to leg length equalisation in all patients. Complete consolidation was documented in all lengthened segments. Conclusion Staged reconstruction via THA and secondary femoral lengthening can successfully be used to reconstruct the hip joint and equalise LLD. The specific anatomical conditions have to be taken into consideration when planning treatment, and patients ought to be closely monitored.

How to equalize the leg length in total hip arthroplasty for patients with unilateral Crowe type IV developmental dysplasia of the hip

2020 ◽  
Author(s):  
Yinqiao Du ◽  
Jingyang Sun ◽  
Haiyang Ma ◽  
Sen Wang ◽  
Ming Ni ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Developmental Dysplasia ◽  
Leg Length ◽  
Greater Trochanter ◽  
Femoral Length ◽  
Total Hip ◽  
Type Iv ◽  
The Mean ◽  
Dysplasia Of The Hip

Abstract Background: The purpose of this study was to explore that how to equalize the leg length in total hip arthroplasty (THA) with shortening subtrochanteric osteotomy (SSTO) or not for unilateral Crowe type IV developmental dysplasia of the hip (DDH) through the evaluation of the postoperative full-length anteroposterior radiographs. Methods: The postoperative radiographs of 60 patients with unilateral Crowe type IV DDH from July 2012 to May 2019 were retrospectively reviewed. These data included leg length, femoral length, height of center of rotation (COR) of hip, height of greater trochanter, and depth of the sleeve or cone. Patients with leg length discrepancy (LLD) < 10 mm were defined as the non-LLD group. Results: In the non LLD group (26 patients of SSTO and 22 of non-SSTO), the femoral length both SSTO and non-SSTO groups were significantly shorter on operated side, compared with the contralateral side, and the mean discrepancy in SSTO group was approximately equal to the mean length of SSTO. The mean height of COR of hip on operated sides both SSTO and non-SSTO groups were 13.2 mm, and the contralateral sides were 15.2 mm and 15.5 mm, respectively. The depth of the sleeve or cone between SSTO and non-SSTO groups were 21.7 mm and 30.6 mm, respectively. The depth of the sleeve or cone in SSTO group was negatively correlated with the length of SSTO. The height of the greater trochanter of the operated and contralateral sides were 5.3 mm and 16.6 mm in SSTO group, and those in the non-SSTO group were 13.2 mm and 17.2 mm. Conclusions: SSTO leaded to femoral shortening on the operated side for patients with unilateral Crowe type IV DDH. The position of sleeve or cone should be close to the apex of greater trochanter to compensate the lengh of SSTO.

Mid-Term Results of Ceramic-on-Ceramic Total Hip Arthroplasty with Sandwich Cup

2006 ◽  
Vol 309-311 ◽  
pp. 1357-1362
Author(s):  
Masahiro Hasegawa ◽  
Akihiro Sudo ◽  
Atsumasa Uchida
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Hip Dislocation ◽  
Clinical Results ◽  
Total Hip ◽  
The Mean ◽  
Acetabular Components ◽  
Mid Term Results ◽  
Ceramic On Ceramic

In ceramic-on-ceramic total hip arthroplasty (THA), modular acetabular component with a sandwich insertion was developed and evaluated mid-term clinical results. 35 hips had undergone cementless ceramic-on-ceramic THA with sandwich cup (Kyocera, Kyoto, Japan). The mean duration of follow-up was 5 years. 6 hips had undergone component revisions. The reasons for revision included infection in 1 hip, dislocation with loosening in 2 hips, alumina liner fractures in 2 hips, and cup dissociation in 1 hip. All femoral and acetabular components showed no loosening in the unrevised hips at the time of the last follow-up. None of the 29 unrevised hips had osteolysis.

Iliopsoas pathology after total hip arthroplasty: a young person’s complication

2021 ◽  
Vol 103-B (2) ◽  
pp. 305-308
Author(s):  
Matthew Howell ◽  
Fraser J. Rae ◽  
Aman Khan ◽  
Graeme Holt
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Groin Pain ◽  
Steroid Injection ◽  
Case Series ◽  
Leg Length ◽  
Younger Patients ◽  
Total Hip ◽  
Active Flexion ◽  
The Mean

Aims Iliopsoas pathology is a relatively uncommon cause of pain following total hip arthroplasty (THA), typically presenting with symptoms of groin pain on active flexion and/or extension of the hip. A variety of conservative and surgical treatment options have been reported. In this retrospective cohort study, we report the incidence of iliopsoas pathology and treatment outcomes. Methods A retrospective review of 1,000 patients who underwent THA over a five-year period was conducted, to determine the incidence of patients diagnosed with iliopsoas pathology. Outcome following non-surgical and surgical management was assessed. Results In all, 24 patients were diagnosed as having developed symptomatic iliopsoas pathology giving an incidence of 2.4%. While the mean age for receiving a THA was 65 years, the mean age for developing iliopsoas pathology was 54 years (28 to 67). Younger patients and those receiving THA for conditions other than primary osteoarthritis were at a higher risk of developing this complication. Ultrasound-guided steroid injection/physiotherapy resulted in complete resolution of symptoms in 61% of cases, partial resolution in 13%, and no benefit in 26%. Eight out of 24 patients (who initially responded to injection) subsequently underwent surgical intervention including tenotomy (n = 7) and revision of the acetabular component (n = 1). Conclusion This is the largest case series to estimate the incidence of iliopsoas pathology to date. There is a higher incidence of this condition in younger patients, possibly due to the differing surgical indications. Arthoplasty for Perthes' disease or developmental dysplasia of the hip (DDH) often results in leg length and horizontal offset being increased. This, in turn, may increase tension on the iliopsoas tendon, possibly resulting in a higher risk of psoas irritation. Image-guided steroid injection is a low-risk, relatively effective treatment. In refractory cases, tendon release may be considered. Patients should be counselled of the risk of persisting groin pain when undergoing THA. Cite this article: Bone Joint J 2021;103-B(2):305–308.

scholarly journals Restoring femoral offset and leg length; the potential of a short curved stem in total hip arthroplasty

2019 ◽  
Vol 16 (5) ◽  
pp. 396-399 ◽  
Author(s):  
Thom E. Snijders ◽  
Joost H.J. van Erp ◽  
Arthur de Gast
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Leg Length ◽  
Femoral Offset ◽  
Total Hip

scholarly journals The intraoperative use of a calliper predicts leg length and offset after total hip arthroplasty. Component subsidence influences the leg length

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Maliha Fansur ◽  
Nagib A. Yurdi ◽  
Reinhard Stoewe
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Limb Length ◽  
Leg Length Discrepancy ◽  
Long Term Results ◽  
Leg Length ◽  
X Ray ◽  
Total Hip ◽  
Length Discrepancy ◽  
Post Surgery

Abstract Background The purpose of total hip arthroplasty (THA) post-surgery and proper physiotherapy is positive recovery for the patient. Consideration is given to hip replacement biomechanics by ensuring no discrepancies in limb length (LL) and a stable prosthesis. Therefore, the patient must have proper preoperative planning and communication and a clear understanding of what to expect. Methods A prospective series of 59 THA operated by a single surgeon via Hardinge approach was studied, using an intraoperative calliper (CAL) to predict the change of LL and offset. We compared the results of the intraoperative changes before and after THA implantation with the reference of these values on anteroposterior x-ray pelvis. The importance of leg length balance and a good offset restoration is questioned, and the effect of component subsidence on leg length is considered. Results The average preoperative leg length discrepancy was −6.0 mm, postoperatively +3.6 mm. There was a strong correlation between the CAL measurements and the values on the x-ray (LL, r=0.873, p<0.01; offset, r=0.542, p<0.01). Reliability is better for limb length than for offset. These results are comparable within the literature and the statistical results from other studies reviewed. In addition, we evaluate the importance of subsidence of the prosthesis components for long-term results. Conclusion The intraoperative use of CAL gives excellent results in predicting the final LL and offset after THA. Considering subsidence of prosthesis components, a target zone around +5 mm might be more suitable for leg length directly postoperatively. Moreover, surgeons must discuss the topic of leg length discrepancy (LLD) intensively with the patient pre-operatively. Level of evidence Level 4, prospective cohort study

scholarly journals A Smart Tool for Intraoperative Leg Length Targeting in Total Hip Arthroplasty: A Retrospective Cohort Study

2016 ◽  
Vol 10 (1) ◽  
pp. 490-499 ◽  
Author(s):  
Paul Grosso ◽  
Matthew Snider ◽  
Jeffrey M. Muir
Keyword(s):  
Total Hip Arthroplasty ◽  
Real Time ◽  
Hip Arthroplasty ◽  
Mean Difference ◽  
Leg Length ◽  
Total Hip ◽  
Radiographic Measurements ◽  
Surgeon Training ◽  
Statistical Limit ◽  
The Mean

Background:Leg length discrepancies following total hip arthroplasty (THA) may necessitate subsequent interventions, from heel lifts to revision surgery. Current intraoperative methods of determining leg length are either inaccurate or expensive and invasive.Objective:The objective of the current study was to investigate the ability of a novel, intraoperative smart tool (Intellijoint HIP®, Intellijoint Surgical®, Inc., Waterloo, ON) to provide accurate, real-time leg length measurements during THA.Methods:We retrospectively reviewed the medical records of 25 patients who underwent THA utilizing the Intellijoint HIP smart tool between February and August 2014. Intraoperative leg length data was compared with radiographic leg length calculations. Two observers blinded to the Intellijoint HIP findings independently assessed all post-procedure radiographs.Results:The mean difference between smart tool and radiographic measurements was 1.3 mm [CI: -0.1, 2.7]. 88% (22/25) of intraoperative measurements were within 5 mm of radiographic measurements; 100% (25/25) were within 10 mm. A Bland-Altman analysis showed excellent agreement, with 96% (24/25) of measurements within the statistical limit for acceptable agreement, and 84% (21/25) within the clinically acceptable range (± 5 mm). Removal of the first 13 procedures (surgeon training) decreased the mean difference between methods to 0.6 mm [-0.6, 1.9]. All post-training procedures were associated with a difference of <5 mm. There were no reported adverse events related to the use of the smart tool.Conclusion:The Intellijoint HIP smart tool is a safe and accurate tool for providing intraoperative measurements of leg length in real-time.

scholarly journals Greater increase in femoral offset with use of collum femoris-preserving stem than Tri-Lock stem in primary total hip arthroplasty

2020 ◽  
Vol 48 (5) ◽  
pp. 030006052092599
Author(s):  
Mengxuan Yao ◽  
Yuchuan Wang ◽  
Congcong Wei ◽  
Yongtai Han ◽  
Huijie Li
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Harris Hip Score ◽  
Leg Length ◽  
Femoral Offset ◽  
Unaffected Side ◽  
Neck Shaft Angle ◽  
Total Hip ◽  
Stem Group

Objective This study was performed to compare the clinical outcomes and performance of the collum femoris-preserving (CFP) stem (Waldemar Link GmbH & Co., Hamburg, Germany) and the Tri-Lock stem (DePuy Orthopaedics, Warsaw, IN, USA) in terms of femoral offset (FO) and leg length reconstruction. Methods Clinical and radiographic data of patients who underwent total hip arthroplasty with either a CFP stem or Tri-Lock stem from January 2016 to March 2017 were compared (65 and 57 patients, respectively). The Harris hip score and Western Ontario and McMaster Universities Osteoarthritis Index were recorded. The FO, femoral vertical offset, and neck–shaft angle were measured at the last follow-up. The occurrence of dislocation and periprosthetic fracture during the follow-up period was recorded. Results The CFP stem induced significantly more FO than did the Tri-Lock stem on the operated side than contralateral side (3.63 ± 4.28 vs. 0.83 ± 5.46 mm). Significantly fewer patients had a >5-mm decrease in FO on the unaffected side in the CFP stem group ( n = 1) than Tri-Lock stem group ( n = 10). Conclusion Both stems similarly improved hip function and reconstructed the leg length, but the CFP stem was superior to the Tri-Lock stem in reconstructing FO.

Sign in / Sign up

Export Citation Format

Share Document