Nonlocal vibration analysis of the three-layered FG nanoplates subjected to applied electric potential considering thickness stretching effect

Author(s):  
Mohammad Arefi ◽  
Amir Hossein Soltan Arani

Comprehensive nonlocal piezoelasticity relations are developed in this paper for a sandwich functionally graded nanoplate subjected to applied electric potential based on higher-order shear and normal deformation theory. To account thickness stretching effect, the higher-order shear and normal deformation theory is developed. Based on this theory, the transverse deflection is decomposed into bending, shear and stretching portions in which the third term is reflected variation of transverse deflection along the thickness direction. Size dependency is accounted in governing equations based on nonlocal elasticity theory. The sandwich nanoplate is made of a functionally graded core integrated with two piezoelectric layers. Distribution of material properties are assumed according to the power-law function in the thickness direction. The Hamilton’s principle is used to derive governing equations of motion. Navier’s technique is implemented to solve partial differential equation of motion. Accuracy and efficiency of the presented technique are verified by a comparison between obtained results and existing results in literature for two cases including and excluding thickness stretching effect. The comparison between the results with and without thickness stretching effect can justify necessity of present work. Large parametric analysis is organized to investigate effect of significant parameters such as external applied voltage, nonlocal parameter, non-homogeneous index, stretching effect, length-to-thickness, length-to-width and core-to-face sheet thickness ratios on the vibrational behavior of the system. As an important result of this study, one can conclude that accounting thickness stretching effect leads to decrease of natural frequencies in comparison with cases disregards thickness stretching.

2014 ◽  
Vol 11 (06) ◽  
pp. 1350098 ◽  
Author(s):  
ABDERRAHMANE SAID ◽  
MOHAMMED AMEUR ◽  
ABDELMOUMEN ANIS BOUSAHLA ◽  
ABDELOUAHED TOUNSI

An improved simple hyperbolic shear deformation theory involving only four unknown functions, as against five functions in case of first or other higher-order shear deformation theories, is introduced for the analysis of functionally graded plates resting on a Winkler–Pasternak elastic foundation. The governing equations are derived by employing the principle of virtual work and the physical neutral surface concept. The accuracy of the present analysis is demonstrated by comparing some of the present results with those of the classical, the first-order and the other higher-order theories.


2013 ◽  
Vol 13 (01) ◽  
pp. 1350004 ◽  
Author(s):  
D. K. JHA ◽  
TARUN KANT ◽  
R. K. SINGH

Free vibration analysis of functionally graded elastic, rectangular, and simply supported (diaphragm) plates is presented based on a higher-order shear and normal deformation theory (HOSNT). Although functionally graded materials (FGMs) are highly heterogeneous in nature, they are generally idealized as continua with mechanical properties changing smoothly with respect to the spatial coordinates. The material properties of functionally graded (FG) plates are assumed here to be varying through the thickness of the plate in a continuous manner. The Poisson ratios of the FG plates are assumed to be constant, but their Young's modulii and densities vary continuously in the thickness direction according to the volume fraction of constituents which is mathematically modeled as a power law function. The equations of motion are derived using Hamilton's principle for the FG plates on the basis of a HOSNT assuming varying material properties. Numerical solutions are obtained by the use of Navier solution method. The accuracy of the numerical solutions is first established through comparison with the exact three-dimensional (3D) elasticity solutions and the present solutions are then compared with available solutions of other models.


2014 ◽  
Vol 60 ◽  
pp. 274-283 ◽  
Author(s):  
Zakaria Belabed ◽  
Mohammed Sid Ahmed Houari ◽  
Abdelouahed Tounsi ◽  
S.R. Mahmoud ◽  
O. Anwar Bég

2014 ◽  
Vol 11 (06) ◽  
pp. 1350082 ◽  
Author(s):  
ABDELMOUMEN ANIS BOUSAHLA ◽  
MOHAMMED SID AHMED HOUARI ◽  
ABDELOUAHED TOUNSI ◽  
EL ABBAS ADDA BEDIA

In this paper, a new trigonometric higher-order theory including the stretching effect is developed for the static analysis of advanced composite plates such as functionally graded plates. The number of unknown functions involved in the present theory is only five as against six or more in case of other shear and normal deformation theories. The governing equations are derived by employing the principle of virtual work and the physical neutral surface concept. There is no stretching–bending coupling effect in the neutral surface-based formulation, and consequently, the governing equations and boundary conditions of functionally graded plates based on neutral surface have the simple forms as those of isotropic plates. Navier-type analytical solution is obtained for functionally graded plate subjected to transverse load for simply supported boundary conditions. A comparison with the corresponding results is made to check the accuracy and efficiency of the present theory.


Author(s):  
Ankit Gupta ◽  
Mohammad Talha

In the present study, a new trigonometric higher-order shear and normal deformation theory is proposed and implemented to investigate the free vibration characteristics of functionally graded material (FGM) plates. The present theory comprises the nonlinear variation in the in-plane and transverse displacement and accommodates, both shear deformation and thickness stretching effects. It also satisfies the stress-free boundary conditions on the top and bottom surfaces of the plate without requiring any shear correction factor. The governing equations are derived using the variational principle. The effective mechanical properties of FGM plates are assumed to vary according to a power law distribution of the volume fraction of the constituents. Poisson’s ratios of FGM plates are assumed constant. The numerical solution has been obtained using an efficient displacement based C0 finite element model with eight degrees of freedom per node. The computed results are compared with 3-dimensional and quasi-3-dimensional solutions and those projected by other well-known plate theories. Natural frequencies of the functionally graded plates with various side-to-thickness ratios, boundary conditions, and volume fraction index ‘n’ have been computed. It can be concluded that the proposed model is not only accurate but also simple in predicting the vibration behavior of functionally graded plates.


2015 ◽  
Vol 18 (3) ◽  
pp. 793-809 ◽  
Author(s):  
Mustapha Meradjah ◽  
Abdelhakim Kaci ◽  
Mohammed Sid Ahmed Houari ◽  
Abdelouahed Tounsi ◽  
S.R. Mahmoud

Sign in / Sign up

Export Citation Format

Share Document