scholarly journals Dynamic contact angle of water-based titanium oxide nanofluid

2013 ◽  
Vol 8 (1) ◽  
pp. 282 ◽  
Author(s):  
Milad Radiom ◽  
Chun Yang ◽  
Weng Kong Chan
e-Polymers ◽  
2021 ◽  
Vol 22 (1) ◽  
pp. 38-47
Author(s):  
Kaifang Xie ◽  
Xinjun Bao ◽  
Hengshu Zhou ◽  
Bin He ◽  
Yuegang Liu ◽  
...  

Abstract In this article, water-based polyurethane (PU) with different concentrations and partial alcoholysis polyvinyl alcohol (PVA) were used to coat polyester (PET) harness cord in turn. The surface and mechanical properties of harness cord before and after coating were evaluated by performing the tests of dynamic contact angle, morphology observation, bending properties, tensile properties, and wearability. It was found that the surface properties of 1.5% PU-coated harness cord tended to be stable, and the mechanical properties of PU(1.5%)/PVA-coated harness cord were optimal. Compared with PVA-coated harness cord, the wearability of PU(1.5%)/PVA-coated harness cord showed a great increment up to 135.7%. This was because the PU coating effectively improved the interfacial properties between the PVA coating and the hydrophobic PET fibers and enhanced the adhesion of the PVA coating to the PET fibers.


Author(s):  
O.N Goncharova ◽  
◽  
I.V. Marchuk ◽  
A.V. Zakurdaeva ◽  
◽  
...  

2013 ◽  
Vol 333-335 ◽  
pp. 2004-2009
Author(s):  
Lin Ling Jiang ◽  
Wei Mo ◽  
Xiao Jing Yang ◽  
Tian Li Xue ◽  
Shao Jian Ma

To better understand the sedimentation processes of bentonite, the sedimentation characteristic of bentonite suspension was studied by using the sedimentation analysis module of Dynamic Contact Angle Meter and Tensiometer. The results indicated that sedimentation characteristics of bentonite suspension were affected by the concentration and pH values of the suspension together with the dosage of dispersants. The natural sedimentation rates of bentonite suspension declined firstly with prolonging the sedimentation time and soon stabilized after about 50s. The sedimentation weight of particles hardly changed when the concentration ranged from 0.5% to 5.0%, while it increased significantly when ranged from 5.0% to 10.0%. The sedimentation weight and rate were relatively bigger at 4.4, 11.8 than that of 6.0, 7.9, and the maximum values appeared at pH11.8. Adding sodium pyrophosphate could improve the dispersibility of bentonite suspension.


Polymer ◽  
1996 ◽  
Vol 37 (16) ◽  
pp. 3659-3664 ◽  
Author(s):  
T. Kasemura ◽  
S. Takahashi ◽  
N. Nakane ◽  
T. Maegawa

Sign in / Sign up

Export Citation Format

Share Document