Accuracy of image-free navigation in intraoperative leg length change from total hip arthroplasty using evaluations from 2D and 3D measurements

Abstract Background Leg length discrepancy is one of the most common problems after total hip arthroplasty (THA). The aim of this study was to investigate the accuracy of image-free navigation in intraoperative leg length change (LLC) using evaluations from anteroposterior radiographs (2D measurement) and 3D bone models using CT data (3D measurement). Methods One hundred THAs with cementless cups and stems were performed using an image-free navigation system in our hospital. We evaluated the accuracy of image-free navigation based on LLC from 2D and 3D measurements. Furthermore, we also investigated error in absolute value and correlations between 2D and 3D measurements in LLC. Results The accuracy of image-free navigation based on 2D measurement was 94% within 5 mm and 76% within 3 mm. The accuracy of image-free navigation based on 3D measurement was 92% within 5 mm and 81% within 3 mm. The error in absolute value in LLC between 2D and 3D measurements was 1.7 ± 1.4 mm (range, 0 to 6 mm). A strong correlation was observed between 2D and 3D measurements in the LLC. Conclusions In the present study, good accuracy of image-free navigation in intraoperative LLC was confirmed for both evaluation methods from 2D and 3D measurements. In addition, the error in absolute value in the LLC between 2D and 3D measurements was very small, and we observed a strong correlation between 2D and 3D measurements. Based on these results, evaluation of LLC from radiographs was considered sufficient if radiographs can be taken accurately.

Download Full-text

Predicting Leg-Length Change after Total Hip Arthroplasty by Measuring Preoperative Hip Flexion under General Anaesthesia

Journal of Orthopaedic Surgery ◽

10.1177/230949901202000312 ◽

2012 ◽

Vol 20 (3) ◽

pp. 327-330 ◽

Cited By ~ 1

Author(s):

Takaaki Fujishiro ◽

Takayuki Nishiyama ◽

Shinya Hayashi ◽

Shingo Hashimoto ◽

Masahiro Kurosaka ◽

...

Keyword(s):

Total Hip Arthroplasty ◽

General Anaesthesia ◽

Hip Arthroplasty ◽

Length Change ◽

Leg Length ◽

Total Hip ◽

Hip Flexion

Download Full-text

Leg Length Change in Total Hip Arthroplasty With Subtrochanteric Femoral Shortening Osteotomy for Crowe Type IV Developmental Hip Dysplasia

The Journal of Arthroplasty ◽

10.1016/j.arth.2012.01.032 ◽

2012 ◽

Vol 27 (6) ◽

pp. 1019-1022 ◽

Cited By ~ 14

Author(s):

Takaaki Fujishiro ◽

Takayuki Nishiyama ◽

Shinya Hayashi ◽

Masahiro Kurosaka ◽

Taiki Kanno ◽

...

Keyword(s):

Total Hip Arthroplasty ◽

Hip Arthroplasty ◽

Hip Dysplasia ◽

Length Change ◽

Leg Length ◽

Developmental Hip Dysplasia ◽

Total Hip ◽

Type Iv ◽

Shortening Osteotomy ◽

Femoral Shortening

Download Full-text

Value of 3D Preoperative Planning for Primary Total Hip Arthroplasty Based on Biplanar Weightbearing Radiographs

BioMed Research International ◽

10.1155/2019/1932191 ◽

2019 ◽

Vol 2019 ◽

pp. 1-7 ◽

Cited By ~ 6

Author(s):

Y. Knafo ◽

F. Houfani ◽

B. Zaharia ◽

F. Egrise ◽

I. Clerc-Urmès ◽

...

Keyword(s):

Total Hip Arthroplasty ◽

Hip Arthroplasty ◽

Preoperative Planning ◽

Femoral Stem ◽

Leg Length ◽

Femoral Offset ◽

Postoperative Result ◽

Total Hip ◽

Planning Software ◽

Navigated Surgery

Two-dimensional (2D) planning on standard radiographs for total hip arthroplasty may not be sufficiently accurate to predict implant sizing or restore leg length and femoral offset, whereas 3D planning avoids magnification and projection errors. Furthermore, weightbearing measures are not available with computed tomography (CT) and leg length and offset are rarely checked postoperatively using any imaging modality. Navigation can usually achieve a surgical plan precisely, but the choice of that plan remains key, which is best guided by preoperative planning. The study objectives were therefore to (1) evaluate the accuracy of stem/cup size prediction using dedicated 3D planning software based on biplanar radiographic imaging under weightbearing and (2) compare the preplanned leg length and femoral offset with the postoperative result. This single-centre, single-surgeon prospective study consisted of a cohort of 33 patients operated on over 24 months. The routine clinical workflow consisted of preoperative biplanar weightbearing imaging, 3D surgical planning, navigated surgery to execute the plan, and postoperative biplanar imaging to verify the radiological outcomes in 3D weightbearing. 3D planning was performed with the dedicated hipEOS® planning software to determine stem and cup size and position, plus 3D anatomical and functional parameters, in particular variations in leg length and femoral offset. Component size planning accuracy was 94% (31/33) within one size for the femoral stem and 100% (33/33) within one size for the acetabular cup. There were no significant differences between planned versus implanted femoral stem size or planned versus measured changes in leg length or offset. Cup size did differ significantly, tending towards implanting one size larger when there was a difference. Biplanar radiographs plus hipEOS planning software showed good reliability for predicting implant size, leg length, and femoral offset and postoperatively provided a check on the navigated surgery. Compared to previous studies, the predictive results were better than 2D planning on conventional radiography and equal to 3D planning on CT images, with lower radiation dose, and in the weightbearing position.

Download Full-text

Staged reconstruction of unilateral neglected hip dislocation through total hip arthroplasty and subsequent intramedullary femoral lengthening

International Orthopaedics ◽

10.1007/s00264-021-05099-x ◽

2021 ◽

Author(s):

Bjoern Vogt ◽

Christoph Theil ◽

Georg Gosheger ◽

Adrien Frommer ◽

Burkhard Moellenbeck ◽

...

Keyword(s):

Total Hip Arthroplasty ◽

Hip Arthroplasty ◽

Plate Fixation ◽

Hip Dislocation ◽

Leg Length ◽

Total Hip ◽

Femoral Lengthening ◽

Shortening Osteotomy ◽

Successful Approach ◽

Staged Reconstruction

Abstract Background and purpose Total hip arthroplasty (THA) is a successful approach to treat unilateral symptomatic neglected hip dislocation (NHD). However, the extensive leg length discrepancy (LLD) can hereby only be partially corrected. In case of residual LLD of more than 2 cm, subsequent femoral lengthening can be considered. Patients/material/methods Retrospective analysis of clinical data and radiographs of five patients (age 38.1 (28–51) years) with unilateral NHD who underwent THA with (n = 3) or without (n = 2) subtrochanteric shortening osteotomy (SSO) and secondary intramedullary femoral lengthening through a retrograde magnetically-driven lengthening nail (follow-up 18.4 (15–27) months). Results LLD was 51.0 (45–60) mm before and 37.0 (30–45) mm after THA. Delayed bone union at one SSO site healed after revision with autologous bone grafting and plate fixation. Subsequent lengthening led to leg length equalisation in all patients. Complete consolidation was documented in all lengthened segments. Conclusion Staged reconstruction via THA and secondary femoral lengthening can successfully be used to reconstruct the hip joint and equalise LLD. The specific anatomical conditions have to be taken into consideration when planning treatment, and patients ought to be closely monitored.

Download Full-text