Accuracy of virtual surgical planning in segmental osteotomy in combination with bimaxillary orthognathic surgery with surgery first approach
Abstract Background This study aimed to assess the accuracy of virtual surgical planning (VSP) in segmental osteotomy in combination with bimaxillary orthognathic surgery with surgery first approach (SFA) by means of three-dimensional (3D) measuring and superimposition, so as to promote the application of digital technology in combined orthodontic-orthognathic treatment. Methods 20 patients treated with segmental osteotomy in combination with bimaxillary orthognathic surgery with SFA from 2018 to 2020 were included. All of them acquired VSP performed by ProPlan CMF 3.0 software (Materialise Corporation, Belgium). The preoperative (T0) 3D model of VSP and the postoperative (T1) 3D model, reconstructed by the cone-beam computed tomography (CBCT) data acquired one week after surgery, were compared by measuring the 3D coordinates of the landmarks as well as 3D model superimposition for deviation analysis. The deviation analysis was achieved by Geomagic Studio 2013 (3D Systems Corporation, USA). The differences which represented the accuracy of VSP were evaluated by the root mean square deviation (RMSD) and the Bland–Altman method. Results There was no statistically significant difference between the 3D coordinates of T1 and T0 (P > 0.05), and the mean overall RMSD was 1.37 mm, within the clinical relevance of 2 mm. The RMSD of sagittal direction (1.76 mm) was greater than that of coronal and vertical directions (1.09 mm and 1.24 mm), and the RMSD of maxillary and mandibular aspects were basically equal (1.30 mm and 1.45 mm). The Bland–Altman method showed the T0 and T1 measurements were in good agreement. The mean RMSD obtained from the deviation analysis was 1.85 mm, within the clinical relevance. Conclusions VSP in segmental osteotomy in combination with bimaxillary orthognathic surgery with SFA proved to acquire accurate outcome in this study.
