316 Study on Dynamic Stability and Elasto-plastic Deformation of Thin Cylindrical Shell Subjected to Horizontal and Vertical Excitations

2006 ◽  
Vol 2006.81 (0) ◽  
pp. _3-20_
Author(s):  
Toshiyuki Tachibana ◽  
Katsuhisa Fujita ◽  
Tomohiro Ito
Author(s):  
Katsuhisa Fujita ◽  
Taisuke Nosaka ◽  
Tomohiro Ito

Many structures such as support columns such as those for elevated expressways and towers tend to become larger and more flexible recently, thus the buckling or collapse of these structures is considered to easily occur than ever due to huge earthquakes. Actually, in the Hyogo-ken Nambu earthquake in Japan, buckling phenomena of tall support columns were observed every-where. Therefore, the evaluation technology on the dynamic stability is very important in order to ensure the seismic design reliability for these structures. The authors have ever studied the effects of the horizontal and vertical simultaneous excitations on the above-mentioned buckling phenomena of support columns experimentally. More-over, they also investigated the fundamental phenomena of the dynamic stability of the support columns subjected to the horizontal and vertical excitations simultaneously by numerical simulations using an analytical model where the support column is treated as a tall elastic cantilever beam. The purpose of this paper is on the dynamic instability, that is dynamic buckling, of a cylindrical shell structures such as those for elevated expressways, towers, containment vessels, LNG tanks and water tanks in various industrial plants so on subjected to horizontal and vertical excitations simultaneously. The coupled motion of equation with horizontal and vertical excitations simultaneously for these cylindrical shell structures is derived in this paper, and this modeling is shown to become a Mathieu type’s parametric excitation. The numerical simulation analysis is carried out for a cylindrical shell model with an attached mass on its tip. Comparing with the classical seismic analysis method, this proposed dynamic instability analysis method shows the larger deformation in horizontal direction due to the parametric excitation of the vertical seismic wave. As the results, the structures are apt to lose the structural stability more due to the coupling effects between the horizontal and vertical seismic simultaneous loadings.


Author(s):  
W. Hamouche ◽  
C. Maurini ◽  
S. Vidoli ◽  
A. Vincenti

We have designed and tested experimentally a morphing structure consisting of a neutrally stable thin cylindrical shell driven by a multi-parameter piezoelectric actuation. The shell is obtained by plastically deforming an initially flat copper disc, so as to induce large isotropic and almost uniform inelastic curvatures. Following the plastic deformation, in a perfectly isotropic system, the shell is theoretically neutrally stable, having a continuous set of stable cylindrical shapes corresponding to the rotation of the axis of maximal curvature. Small imperfections render the actual structure bistable, giving preferred orientations. A three-parameter piezoelectric actuation, exerted through micro-fibre-composite actuators, allows us to add a small perturbation to the plastic inelastic curvature and to control the direction of maximal curvature. This actuation law is designed through a geometrical analogy based on a fully nonlinear inextensible uniform-curvature shell model. We report on the fabrication, identification and experimental testing of a prototype and demonstrate the effectiveness of the piezoelectric actuators in controlling its shape. The resulting motion is an apparent rotation of the shell, controlled by the voltages as in a ‘gear-less motor’, which is, in reality, a precession of the axis of principal curvature.


AIAA Journal ◽  
2000 ◽  
Vol 38 ◽  
pp. 1070-1077
Author(s):  
Si-Hyoung Park ◽  
Ji-Hwan Kim

Sign in / Sign up

Export Citation Format

Share Document