On-chip ytterbium-doped lithium niobate microdisk lasers with high conversion efficiency

2022 ◽  
Author(s):  
qiang Luo ◽  
Chen Yang ◽  
Zhenzhong Hao ◽  
Ru Zhang ◽  
Rui Ma ◽  
...  
Nanomaterials ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 69 ◽  
Author(s):  
Zhijin Huang ◽  
Huihui Lu ◽  
Hanqing Xiong ◽  
Yang Li ◽  
Huajiang Chen ◽  
...  

Second harmonic generation (SHG) is an important nonlinear process which is critical for applications, such as optical integrated circuit, nonlinear microscopy, laser, etc. Many challenges remain in the improvement of nonlinear conversion efficiency, since the typical value is of only 10−5 in nanostructures. Here, we theoretically demonstrate a periodic structure consisting of a lithium niobate (LN) bar and an LN disk, on a nanoscale (~300 nm) thin-film platform, which is proposed for a highly efficient SHG. By breaking the structure symmetry, a Fano resonance with a high Q, up to 2350 and a strong optical field enhancement reaching forty-two folds is achieved, which yields a high conversion efficiency, up to 3.165 × 10−4. In addition to its strong second harmonic (SH) signal, we also demonstrate that by applying only 0.444 V on the planar electrode configurations of the nanostructured LN, the wavelength of SH can be tuned within a 1 nm range, while keeping its relatively high conversion efficiency. The proposed structure with the high nonlinear conversion efficiency can be potentially applied for a single-molecule fluorescence imaging, high-resolution nonlinear microscopy and active compact optical device.


2013 ◽  
Vol 38 (5) ◽  
pp. 796 ◽  
Author(s):  
Shu-Wei Huang ◽  
Eduardo Granados ◽  
Wenqian Ronny Huang ◽  
Kyung-Han Hong ◽  
Luis E. Zapata ◽  
...  

Author(s):  
Xiao Liang ◽  
Xinglong Xie ◽  
Jun Kang ◽  
Qingwei Yang ◽  
Hui Wei ◽  
...  

We present the design and experiment of a broadband optical parametric chirped-pulse amplifier (OPCPA) which provides high conversion efficiency and good beam quality at 808 nm wavelength. Using a three-dimensional spatial and temporal numerical model, several design considerations necessary to achieve high conversion efficiency, good beam quality and good output stability are discussed. To improve the conversion efficiency and broaden the amplified signal bandwidth simultaneously, the nonlinear crystal length and OPCPA parameters are analyzed and optimized with the concept of dissipating amplified idler between optical parametric amplification (OPA) of two crystals configuration. In the experiment, an amplifier consisting of two OPCPA stages of ‘L’ type configuration was demonstrated by using the optimized parameters. An amplified signal energy of 160 mJ was achieved with a total pump-to-signal efficiency of 35% (43% efficiency for the OPCPA stage 2). The output bandwidth of signal pulse reached 80 nm and the signal pulse was compressed to 24 fs. The energy stability reached 1.67% RMS at 3% pump energy variation. The optimized OPCPA amplifier operates at a repetition rate of 1 Hz and is used as a front-end injection for the main amplifier of SG-II 5PW laser facility.


Sign in / Sign up

Export Citation Format

Share Document