Bridge live load models from weigh-in-motion data

1992 ◽  
Author(s):  
Robert J. Heywood
Keyword(s):  
Live Load ◽  
Motion Data ◽  
Load Models ◽  
Weigh In Motion

Reliability-Based Site-Specific Live Load Models for the Gordie Howe International Bridge

2019 ◽  
Author(s):  
Todd Ude ◽  
Y. Eddie He ◽  
Matt Chynoweth ◽  
Zaher Yousif
Keyword(s):  
Live Load ◽  
Simulation Studies ◽  
Traffic Patterns ◽  
Limit States ◽  
Site Specific ◽  
Motion Data ◽  
Load Models ◽  
Design Life ◽  
Weigh In Motion ◽  
Large Databases

<p>This paper discusses the development of project-specific live load models to achieve target reliability levels for the Gordie Howe International Bridge. This new bridge between Windsor, Ontario Canada and Detroit, Michigan USA will have a main span of 853 m (2800 ft), a design life of 125 years, and will experience atypical traffic patterns as a result of customs inspection plazas required at both ends of the bridge. Due to these variations relative to standard practice, large databases of weigh-in-motion data and simulation studies were used to modify the live load models of both country’s codes following the approach of NCHRP 683. The limit states addressed extend beyond the Strength 1 (ULS 1), to include high dead-to-live ratio combinations, and fatigue limit states.</p>

Probabilistic assessment of live load effects on continuous span bridges with regular and irregular configurations and its design implications

2020 ◽  
Vol 47 (4) ◽  
pp. 405-417
Author(s):  
A.D. García-Soto ◽  
A. Hernández-Martínez ◽  
J.G. Valdés-Vázquez
Keyword(s):  
Probabilistic Assessment ◽  
Live Load ◽  
Load Model ◽  
Motion Data ◽  
Load Models ◽  
Weigh In Motion ◽  
Single Vehicle ◽  
Load Effects ◽  
Extreme Distribution ◽  
Live Load Model

Studies on live load effects reported in recent literature are based on simple span bridges or on a limited number of continuous span bridges and regular configurations. In this study, an extensive probabilistic assessment of live load effects on continuous bridges is carried out for regular and irregular span configurations using weigh-in-motion data. Single vehicle passage is considered, and live load effects are compared with those from a live load model developed for simple spans from the same database. Truck models from Canada are also used for comparison purposes. Discussion of the fitting of extreme distribution is included, and an optimization scheme for the fitting is proposed. The most important finding of the study is that the use of live load models developed from simple spans or a limited number of continuous spans may not be suitable for designing continuous bridges, especially those with irregular configurations and short spans.

scholarly journals Single and multiple presence statistics for bridge live load based on weigh-in-motion data

2017 ◽  
Vol 10 (6) ◽  
pp. 1163-1173 ◽  
Author(s):  
E. L. PORTELA ◽  
R. M. TEIXEIRA ◽  
T. N. BITTENCOURT ◽  
H. NASSIF
Keyword(s):  
High Speed ◽  
Daily Basis ◽  
Concrete Bridges ◽  
General Tendency ◽  
Live Load ◽  
Motion Data ◽  
Load Models ◽  
Weigh In Motion ◽  
Live Load Model ◽  
Bridge Spans

Abstract Modeling the traffic loads on bridges has been the subject of numerous studies. Defining a live load model to be used for bridge design is not an easy task. It demands among many other things a reliable dataset, a well-defined procedure for filtering data and also the determination of statistics for single and multiple presence occurrences. This study examines and characterizes the live load statistics for Brazilian concrete bridges. Single and multiple truck presence are evaluated for different bridge spans and truck daily volume. The sample is comprised of the thirteen months of data from a High Speed Weigh-In-Motion station (HS-WIM) in a resolution of one hundredth of a second currently operating on the Fernão Dias highway, also known as BR-381. The system provides eleven thousand records on a daily basis. After the filtering process three thousand trucks remain. The station takes measures in an same-direction two-lane highway, which allows the evaluation and characterization of both single and multiple presence statistics. Three case of multiple presence are considered: following, side-by-side and staggered cases. The consideration of truck multiple presence on concrete bridges is mandatory to understand and characterize live load models. The results show that with the exception of the side-by-side case, the frequency of multiple truck presence is significantly affected by span length. It also shows that the daily truck volume considerably affects the multiple presence statistics for all load patterns. The results show that the general tendency of the occurrence of all multiple presence events is to increase as the truck volume increases.

Probabilistic assessment of a design truck model and live load factor from weigh-in-motion data for Mexican Highway bridge design

2015 ◽  
Vol 42 (11) ◽  
pp. 970-974 ◽  
Author(s):  
A.D. García-Soto ◽  
A. Hernández-Martínez ◽  
J.G. Valdés-Vázquez
Keyword(s):  
Bridge Engineering ◽  
Load Factor ◽  
Engineering Practice ◽  
Live Load ◽  
Bridge Design ◽  
Statistical Characterization ◽  
Motion Data ◽  
Weigh In Motion ◽  
Load Factors ◽  
Truck Load

This study is focused on the statistical characterization of live load effects on bridges using weigh-in-motion data from a Mexican highway. A truck load model that is simpler than the design truck model implemented in the current Mexican requirements is suggested for design. The statistics are employed in target-reliability based calibration and verification of load factors in Mexican bridge design. Suggestions that could be useful for the Canadian bridge engineering practice are included.

Statistical Investigation of Design Live Load by Applying WIM Data with Different Degree of Compliance with Truck Weight Limit

2018 ◽  
Author(s):  
Inyeol Paik ◽  
Kilhwan Jeong
Keyword(s):  
Measurement Data ◽  
Statistical Investigation ◽  
Live Load ◽  
Overload Control ◽  
Safety Level ◽  
Motion Data ◽  
Weigh In Motion ◽  
Single Vehicle ◽  
Live Load Model ◽  
Truck Weight

<p>The live load model applied to the design of the bridge should be defined so that a target safety level can be secured in the actual traffic environment. In this paper, it is presented that the live load could be greatly affected by the measurement data used for the statistical estimation process. For this purpose, a statistical analysis is performed on WIM (weigh-in-motion) data measured during different periods in terms of the overload control at the same spot of an expressway in Korea. The effects by a single vehicle, the back-to-back series vehicles and the side-by-side parallel vehicles are obtained and compared.</p>

State-Specific LRFR Live Load Factors Using Weigh-in-Motion Data

2008 ◽  
Vol 13 (4) ◽  
pp. 339-350 ◽  
Author(s):  
Jordan Pelphrey ◽  
Christopher Higgins ◽  
Bala Sivakumar ◽  
Richard L. Groff ◽  
Bert H. Hartman ◽  
...  
Keyword(s):  
Live Load ◽  
Motion Data ◽  
Weigh In Motion ◽  
Load Factors
Sign in / Sign up

Export Citation Format

Share Document