Hunting stability and derailment analysis of the high-speed railway vehicle moving on curved tracks

2019 ◽  
Vol 26 (6) ◽  
pp. 824
Author(s):  
Caglar Uyulan ◽  
Metin Gokasan ◽  
Seta Bogosyan
Keyword(s):  
High Speed ◽  
Railway Vehicle ◽  
High Speed Railway ◽  
Hunting Stability

scholarly journals Hunting Stability of High-Speed Railway Vehicles Under Steady Aerodynamic Loads

2018 ◽  
Vol 18 (07) ◽  
pp. 1850093 ◽  
Author(s):  
Xiao-Hui Zeng ◽  
Jiang Lai ◽  
Han Wu
Keyword(s):  
Stability Analysis ◽  
High Speed ◽  
Critical Speed ◽  
Railway Vehicle ◽  
Aerodynamic Load ◽  
High Speed Railway ◽  
Aerodynamic Loads ◽  
Railway Vehicles ◽  
Pitch Moment ◽  
Hunting Stability

With the rising speed of high-speed trains, the aerodynamic loads become more significant and their influences on the hunting stability of railway vehicles deserve to be considered. Such an effect cannot be properly considered by the conventional model of hunting stability analysis. To this end, the linear hunting stability of high-speed railway vehicles running on tangent tracks is studied. A model considering the steady aerodynamic loads due to the joint action of the airflow facing the moving train and the crosswind, is proposed for the hunting stability analysis of a railway vehicle with 17 degrees of freedom (DOF). The key factors considered include: variations of the wheel–rail normal forces, creep coefficients, gravitational stiffness and angular stiffness due to the actions of the aerodynamic load, which affects the characteristics of hunting stability. Using the computer program developed, numerical calculations were carried out for studying the behavior of the linear hunting stability of vehicles under steady aerodynamic loads. The results show that the aerodynamic loads have an obvious effect on the linear critical speeds and instability modes. The linear critical speed decreases monotonously as the crosswind velocity increases, and the influences of pitch moment and lift force on the linear critical speed are larger than the other components of the aerodynamic loads.

scholarly journals Hunting stability of high-speed railway vehicles on a curved track considering the effects of steady aerodynamic loads

2016 ◽  
Vol 22 (20) ◽  
pp. 4159-4175 ◽  
Author(s):  
Xiaohui Zeng ◽  
Han Wu ◽  
Jiang Lai ◽  
Hongzhi Sheng
Keyword(s):  
High Speed ◽  
Critical Speed ◽  
Railway Vehicle ◽  
High Speed Railway ◽  
Factors Affecting ◽  
Aerodynamic Loads ◽  
Orthogonal Experiments ◽  
Curved Track ◽  
Hunting Stability ◽  
Curve Radius

Aerodynamic loads may have effects on the hunting stability, and the factor of curved track makes it more complicated. Therefore, considering the steady aerodynamic loads generated by crosswind and airflow in the opposite advancing direction of train, the hunting stability of high-speed railway vehicle on a curved track is studied in this paper. The changes of gravitational restoring force and creep coefficients which are caused by aerodynamic loads are considered, and the change of equilibrium position due to aerodynamic loads, centrifugal force and the factor of curved track is also in consideration. A mathematical model of a high-speed railway vehicle during curve negotiation with aerodynamic loads is set up. A program based on the model is written and verified. Using this program, the linear critical speed considering the effects of aerodynamic loads is determined by the eigenvalue analysis. This paper investigates the critical speeds in three aerodynamic conditions. Considering the aerodynamic loads, the dependence of critical speed on curve radius and super-elevation is analyzed, and the impact of aerodynamic loads on instability mode is analyzed as well. In addition, this paper obtains the dominant factors affecting critical speed and the variation tendency of critical speed with primary longitudinal stiffness by orthogonal experiments. The results show that the critical speed decreases or increases while the wind is blowing to outer rail or inner rail respectively. The aerodynamic loads produce obvious effects on the instability mode. The variation tendency of critical speed dependence on curve radius in the conditions with aerodynamic loads keeps consistent with the case without aerodynamic loads. It is seen from the orthogonal experiments that, aerodynamic loads and curve radius are the dominant factors affecting linear critical speed of vehicle on a curved track, and the linear critical speed decreases with the increasing of primary longitudinal stiffness.

scholarly journals Research on Bogie Frame Lateral Instability of High-Speed Railway Vehicle

2018 ◽  
Vol 2018 ◽  
pp. 1-13
Author(s):  
Chen Wang ◽  
Shihui Luo ◽  
Ziqiang Xu ◽  
Chang Gao ◽  
Weihua Ma
Keyword(s):  
High Speed ◽  
Dynamics Simulation ◽  
Lateral Acceleration ◽  
Railway Vehicle ◽  
Lateral Instability ◽  
Bogie Frame ◽  
High Speed Railway ◽  
Long Time ◽  
Line Test ◽  
Equivalent Conicity

In order to find out the reason for the bogie frame instability alarm in the high-speed railway vehicle, the influence of wheel tread profile of the unstable vehicle was investigated. By means of wheel-rail contact analysis and dynamics simulation, the effect of tread wear on the bogie frame lateral stability was studied. The result indicates that the concave wear of tread is gradually aggravated with the increase of operation mileage; meanwhile the wheel-rail equivalent conicity also increases. For the rail which has not been grinded for a long time, the wear of gauge corner and wide-worn zone is relatively severe; the matching equivalent conicity is 0.31-0.4 between the worn rail and the concave-worn-tread wheel set. The equivalent conicity between the grinded rail and the concave-worn tread is below 0.25; the equivalent conicities are always below 0.1 between the reprofiled wheel set and various rails. The result of the line test indicates that the lateral acceleration of bogie frame corresponding to the worn wheel-rail can reach 8.5m/s2, and the acceleration after the grinding is reduced below 4.5m/s2. By dynamics simulation, it turns out that the unreasonable wheel-rail matching relationship is the major cause of the bogie frame lateral alarm. With the tread-concave wear being aggravated, the equivalent conicity of wheel-rail matching constantly increases, which leads to the bogie frame lateral instability and then the frame instability alarm.

Modelling and evaluation of the hunting behaviour of a high-speed railway vehicle on curved track

2018 ◽  
Vol 233 (2) ◽  
pp. 220-236 ◽  
Author(s):  
Vivek Kumar ◽  
Vikas Rastogi ◽  
PM Pathak
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Critical Speed ◽  
Transportation Network ◽  
Graph Model ◽  
Railway Vehicle ◽  
Physical Damage ◽  
Creep Theory ◽  
High Speed Railway ◽  
Hunting Behaviour

Nowadays, rail transport is a very important part of the transportation network for any countries. The demand for high operational speed makes hunting a very common instability problem in railway vehicles. Hunting leads to discomfort and causes physical damage to carriage components, such as wheels, rails, etc. The causes of instability and derailment should be identified and eliminated at the designing stage of a train to ensure its safe operation. In most of the earlier studies on hunting behaviour, a simplified model with a lower degree of freedom were considered, which resulted in incorrect results in some instances. In this study, a complete bond graph model of a railway vehicle with 31 degrees of freedom is presented to determine the response of a high-speed railway vehicle. For this purpose, two wheel–rail contacts grounded on a flange contact and Kalker’s linear creep theory are implemented. The model is simulated to observe the effects of suspension elements on the vehicle’s critical hunting velocity. It is observed that the critical hunting speed is extremely sensitive to the primary longitudinal and lateral springs. Other primary and secondary springs and dampers also affect the critical speed to some extent. However, the critical hunting velocity is insensitive to vertical suspension elements for both the primary and secondary suspensions. Also, the critical speed is found to be inversely related to the conicity of the wheel.

Hunting Stability Analysis of a New High-Speed Railway Vehicle Model Moving on Curved Tracks

2007 ◽  
Author(s):  
Yung-Chang Cheng ◽  
Sen-Yung Lee
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Lateral Displacement ◽  
Creep Model ◽  
Railway Vehicle ◽  
Nonlinear Creep ◽  
Car Body ◽  
Suspension Parameters ◽  
Virtual Boundary ◽  
Hunting Stability

A new dynamic model of railway vehicle moving on curved tracks is proposed. In this new model, the motion of the car body is considered and the motion of the tuck frame is not restricted by a virtual boundary. Based on the heuristic nonlinear creep model, the nonlinear coupled differential equations of the motion of a fourteen degrees of freedom car system, considering the lateral displacement and the yaw angle of the each wheelset, the truck frame and the car body, moving on curved tracks are derived in completeness. To illustrate the accuracy of the analysis, the limiting cases are examined. In addition, the influences of the suspension parameters on the critical hunting speeds evaluated via the linear and the nonlinear creep models respectively are studied. Furthermore, the influences of the suspension parameters on the critical hunting speeds evaluated via the fourteen degrees of freedom car system and the six degrees of freedom truck system, which the motion of the tuck frame is restricted by a virtual boundary, are compared.

Sign in / Sign up

Export Citation Format

Share Document