Contamination of Fukushima Daiichi Nuclear Power Station with actinide elements
Abstract The Fukushima Daiichi Nuclear Power Station, which is owned by the Tokyo Electric Power Company, was damaged by the great earthquake and tsunami on March 11, 2011, and serious contamination due to radioactive nuclides occurred. To investigate the waste management methodologies, contaminated materials were radiochemically analyzed. This paper reviews the analytical data concerning actinide elements. Contaminated water has accumulated in the basement of the reactor and other buildings, and actinide nuclides have been detected in this water. Actinides first get dissolved into the water inside the primary containment vessel, and then their concentration in the water decreases to a certain level with further flow. The contaminated water is chemically decontaminated; however, the actinide concentration does not decrease with time. This suggests that the actinides are continuously being supplied by the damaged fuel via slow dissolution. The dissolved transuranic (TRU) nuclides are recovered in the precipitate via a chemical treatment and are mostly removed from the water. Pu, Am, and Cm were detected in the topsoil at the site and appear to originate from the damaged fuel, whereas the detected U originates from natural sources. TRU nuclides slowly move in soil to deeper layers. The contamination of the rubble is nonuniform, and actinides are detected as well as fission products. Inside the reactor building of unit #2, the TRU nuclide concentration is comparatively higher near the boundary of the primary containment vessel, which experienced a fault during the accident. As for the vegetation, TRU nuclides were only found in fallen leaves near the reactor buildings.
