scholarly journals Impacts of the bleaching and varnishing process on the collapse time in combustion of oriental beech and scots pine woods

Author(s):  
Ahmet Cihangir YALINKILIÇ ◽  
Hakan KESKİN ◽  
Musa ATAR ◽  
Eyüp AKSOY
Author(s):  
Osman Topaçoğlu ◽  
Emre Genç

Forest edges created by silvicultural treatment influence micro-climatic conditions and available light in forest stands. Studies regarding the impacts of forest edges on regeneration is limited in mixed Oriental beech (Fagus orientalis Lipsky)-Scots pine (Pinus sylvestris L.) stands. In this study, the influences of forest edges on height growth, root-collar diameter (RCD) growth and density of seedlings in an adjacent stand of Oriental beech-Scots pine were observed. In addition, the effects of stand basal area and height-to-crown base (HCB) on height growth, RCD growth and seedlings density were monitored. The study was conducted within Samatlar Forest Planning Directorate, in Kastamonu city, Turkey. In the selected Oriental beech-Scots pine stand, twenty-five transects were installed perpendicular to the forest edge, and all the measurements were taken within these transects. There were statistically significant relationships between the distance from the forest edge and the growth of Scots pine seedlings (p<0.05), while the stand edge did not have any effect on the growth of Oriental beech seedlings. Density of Scots pine seedlings decreased, while Oriental beech seedling density increased from the edge into the intact stand (p<0.05). Stand basal area and HCB did not significantly change from the edge into the intact stand (p>0.05). The differences in seedling growth and seedling density between the two species can be associated with their dissimilar tolerance to shade. The initial results obtained in this study point out the importance of forest edges on the regeneration of Oriental beech and Scots pine seedlings. Data suggest that regeneration of mixed Oriental beech-Scots pine should be successful using group methods rather than traditional shelterwood method within entire stand.


2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Turkay Turkoglu ◽  
Ergun Baysal ◽  
Hilmi Toker

The aim of this study was to investigate effects of natural weathering on color stability of Scots pine (Pinus sylvestrisL.) and Oriental beech (Fagus orientalisL.) impregnated with some chemicals [tanalith-E (TN-E), adolit-KD5 (AD-KD5), and chromated copper arsenate (CCA)] and then varnished [synthetic varnish (SV) and polyurethane varnish (PV)]. While applying varnish increased lightness, impregnation decreased lightness of the wood specimens before natural weathering. Natural weathering caused greenish, bluish, and dark color tones of the wood surface. Total color change was increased with increasing exposure times in natural weathering. Untreated (control) wood specimens exhibited higher color changes than the other wood specimens in all the stages of natural weathering. The total color changes of untreated Oriental beech specimens were less than untreated Scots pine specimens. The color stability of impregnated and varnished wood specimens gave better results than untreated and solely varnished wood specimens after natural weathering. The best color stability was obtained from both Oriental beech and Scots pine wood impregnated with TN-E before PV coating.


2019 ◽  
Vol 70 (4) ◽  
pp. 391-398
Author(s):  
Elif Topaloglu

This paper investigates the changes in density, compression strength parallel to grain, static modulus of rupture and modulus of elasticity of untreated (control) and waterborne-treated bamboo (Phyllostachys bambusoides), Scots pine (Pinus sylvestris) and Oriental beech (Fagus orientalis) specimens subjected to accelerated weathering using an accelerated weathering chamber for 672 hours. Wolmanit-CB (CCB), tanalith-E (Tan-E), amine copper quat-1900 (ACQ) and boric acid-borax (BB) were used as waterborne preservatives. The retention value of bamboo specimens was lower than that of wood specimens due to the difference in anatomical structure of bamboo. The value of density, compression strength parallel to grain, static modulus of rupture and modulus of elasticity of treated bamboo and wood were generally higher than those of untreated specimens after accelerated weathering. ACQ treatment generally provided the best protection against weathering in all mechanical tests for both bamboo and wood specimens, while CCB treatment provided an effective protection against weathering in compression strength for Oriental beech. BB treatment provided the least protection against weathering for bamboo and wood specimens compared to other waterborne preservatives.


2016 ◽  
Vol 41 ◽  
pp. 247-250 ◽  
Author(s):  
Serena Moretto ◽  
Francesca Bozzano ◽  
Carlo Esposito ◽  
Paolo Mazzanti
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document