scholarly journals An Estimation of Actual Recycling and Final Disposal Rates of Municipal Solid Waste by Material Flow Analysis in Korea

2019 ◽  
Author(s):  
Jung-Keun Oh ◽  
Ji-Yeon Kim ◽  
Yoon-A Cho ◽  
Ki-Heon Kim ◽  
Gil-Jong Oh
Keyword(s):  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Material Flow ◽  
National Level ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Recycling Rate ◽  
National Goal ◽  
Final Disposal

The recycling, incineration, and final disposal rate of municipal solid waste (MSW) are calculated based on the total amount of waste input to each facility in many countries. These statistic data have serious limitation in setting the national goal and policy for effective waste management because it is not considering the amount of foreign objectives in the process of each life-cycle stage. This case study is to estimate the actual rates of recycling, incineration, and final disposal by material flow analysis (MFA) after the collection of MSW in Korea. The actual rates of recycling, incineration and final disposal for MSW in 2016 were 49.9%, 32.9% and 23.1% respectively, indicating that the recycling rate was lower by 10.1%, while the incineration and final disposal rates were raised by 7.6% and 8.4% respectively, compared with the statistics for current MSW. In addition, the changed actual rates of recycling, incineration treatment, and final landfill, and variation of waste treatment charge according to treated amounts per treatment method was analyzed. This results of this study will contribute to establish national level of plan on effective waste management.

Application of material flow analysis to municipal solid waste in Maputo City, Mozambique

2016 ◽  
Vol 35 (3) ◽  
pp. 253-266 ◽  
Author(s):  
Leticia Sarmento dos Muchangos ◽  
Akihiro Tokai ◽  
Atsuko Hanashima
Keyword(s):  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Material Flow ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Assessment Tools ◽  
Final Disposal ◽  
Material Recovery ◽  
Maputo City

Understanding waste flows within an urban area is important for identifying the main problems and improvement opportunities for efficient waste management. Assessment tools such as material flow analysis (MFA), an extensively applied method in waste management studies, provide a structured and objective evaluating process to characterize the waste management system best, to identify its shortcomings and to propose suitable strategies. This paper presents the application of MFA to municipal solid waste management (MSWM) in Maputo City, the capital of Mozambique. The results included the identification and quantification of the main input and output flows of the MSWM system in 2007 and 2014, from the generation, material recovery and collection, to final disposal and the unaccounted flow of municipal solid waste (MSW). We estimated that the waste generation increased from 397×103 tonnes in 2007 to 437×103 tonnes in 2014, whereas the total material recovery was insignificant in both years – 3×103 and 7×103 tonnes, respectively. As for collection and final disposal, the official collection of waste to the local dumpsite in the inner city increased about threefold, from 76×103 to 253×106 tonnes. For waste unaccounted for, the estimates indicated a reduction during the study period from 300×103 to 158×103 tonnes, due to the increase of collection services. The emphasized aspects include the need for practical waste reduction strategies, the opportunity to explore the potential for material recovery, careful consideration regarding the growing trend of illegal dumping and the urgency in phasing-out from the harmful practice of open dumping.

Data uncertainties in material flow analysis: Municipal solid waste management system in Maputo City, Mozambique

2016 ◽  
Vol 35 (1) ◽  
pp. 120-125 ◽  
Author(s):  
Leticia Sarmento dos Muchangos ◽  
Akihiro Tokai ◽  
Atsuko Hanashima
Keyword(s):  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Material Flow ◽  
Solid Waste Management ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Municipal Solid Waste Management ◽  
Waste Generation ◽  
Maputo City

Material flow analysis can effectively trace and quantify the flows and stocks of materials such as solid wastes in urban environments. However, the integrity of material flow analysis results is compromised by data uncertainties, an occurrence that is particularly acute in low-and-middle-income study contexts. This article investigates the uncertainties in the input data and their effects in a material flow analysis study of municipal solid waste management in Maputo City, the capital of Mozambique. The analysis is based on data collected in 2007 and 2014. Initially, the uncertainties and their ranges were identified by the data classification model of Hedbrant and Sörme, followed by the application of sensitivity analysis. The average lower and upper bounds were 29% and 71%, respectively, in 2007, increasing to 41% and 96%, respectively, in 2014. This indicates higher data quality in 2007 than in 2014. Results also show that not only data are partially missing from the established flows such as waste generation to final disposal, but also that they are limited and inconsistent in emerging flows and processes such as waste generation to material recovery (hence the wider variation in the 2014 parameters). The sensitivity analysis further clarified the most influencing parameter and the degree of influence of each parameter on the waste flows and the interrelations among the parameters. The findings highlight the need for an integrated municipal solid waste management approach to avoid transferring or worsening the negative impacts among the parameters and flows.

Application of material flow analysis for the assessment of current municipal solid waste management in Karachi, Pakistan

2021 ◽  
pp. 0734242X2110004 ◽  
Author(s):  
Shiza Aslam ◽  
Faizan Ali ◽  
Amna Naseer ◽  
Zeshan Sheikh
Keyword(s):  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Informal Sector ◽  
Material Flow ◽  
Solid Waste Management ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Municipal Solid Waste Management ◽  
Material Recovery

This article assesses the status of the solid waste management system (SWMS) in Karachi, the largest city of Pakistan, using the material flow analysis approach, a widely applied method in waste management (WM) studies. It involves a systematic assessment of the material flows of solid waste under the current WM system. A material flow diagram is developed to visualize the input and output waste flows. This study shows the quantification and identification of municipal solid waste (MSW) flow for the year 2019, from the point of generation to the end-use and disposal. Results show that the MSW generation increased from 10,435 to 15,600 metric tonnes per day (TPD) between 2017 to 2019. Approximately, 75% of the waste generated is collected: formally (50%); and informally (25%). The material recovery is low, accounting for only 26.28% of the total waste. There is no official material recovery and recycling facility. Therefore, material recovery solely depends on the informal sector. Results show that 70% of the daily waste ends up in landfills, which is 3120 TPD more than the formally collected waste. This estimated waste of 3120 TPD flows in either due to disposal activities of the backlogged waste or informally collected waste. Overall, Karachi’s SWMS performs poorly with a significant need for improvement. This study recommends adopting integrated WM approaches and inclusion of the informal sector to ensure the affordability and sustainability of the WM system.

scholarly journals Material flow analysis and life cycle assessment of solid waste management in urban green areas, Thailand

2020 ◽  
Vol 30 (1) ◽  
Author(s):  
Indika Thushari ◽  
Juckrit Vicheanteab ◽  
Dao Janjaroen
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Waste Management ◽  
Solid Waste ◽  
Material Flow ◽  
Solid Waste Management ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Waste Recycling ◽  
Urban Green

Abstract This study presents solid waste management planning in an urban green area, Bangkok, Thailand based on the material flow analysis (MFA) and life cycle assessment (LCA). Global warming potential (GWP) of four scenarios for handling solid waste generated in Chulalongkorn University Centenary Park, 2018 was assessed concerning the different ratios of waste recycling, composting, incineration, and landfilling. The results show that alternative systems proposed will result in lower GWP than the existing waste management strategy. The MFA results reveal that the final weights of solid waste ending up in a landfill are 98.8, 101.9, 68.2, and 44.8 t yr− 1 for scenarios 1, 2, 3, and 4, respectively. Increased rates of landfill diversion by increased recycling, composting, and incineration decreased the quantity of solid waste disposed to the landfill and improved the environmental profile of the park waste management system. The LCA results found landfilling to be the dominant source of greenhouse gas (GHG) burdens, while waste recycling was found to result in the reduction of GHG. The results highlight that the use of MFA and LCA as a combined tool to evaluate the environmental performance of solid waste management systems provides valuable information for policy and decision-makers.

Material Flow Analysis of PCDDs/DFs in a Municipal Solid Waste Incineration System

1998 ◽  
Vol 9 (4) ◽  
pp. 123-132 ◽  
Author(s):  
Shin-ichi Sakai ◽  
Takahiro Ukai ◽  
Shin-ya Urano ◽  
Hiroshi Takatsuki ◽  
Kazuo Nakamura ◽  
...  
Keyword(s):  
Municipal Solid Waste ◽  
Solid Waste ◽  
Material Flow ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Waste Incineration ◽  
Municipal Solid Waste Incineration
Sign in / Sign up

Export Citation Format

Share Document