Three Phase Steady State Flow Experiments to Estimate Microemulsion Viscosity

2016 ◽  
Author(s):  
Andrew Davidson ◽  
Nabijan Nizamidin ◽  
Dennis Alexis ◽  
Do Hoon Kim ◽  
Michael Unomah ◽  
...  
Keyword(s):  
Steady State ◽  
Steady State Flow ◽  
State Flow ◽  
Three Phase ◽  
Flow Experiments

Drift-Flux Parameters for Three-Phase Steady-State Flow in Wellbores

2004 ◽  
Author(s):  
H. Shi ◽  
J.A. Holmes ◽  
L.R. Diaz ◽  
L.J. Durlofsky ◽  
K. Aziz
Keyword(s):  
Steady State ◽  
Steady State Flow ◽  
State Flow ◽  
Drift Flux ◽  
Three Phase

Drift-Flux Parameters for Three-Phase Steady-State Flow in Wellbores

SPE Journal ◽  
2005 ◽  
Vol 10 (02) ◽  
pp. 130-137 ◽  
Author(s):  
Hua Shi ◽  
Jonathan Holmes ◽  
Luis Diaz ◽  
Louis J. Durlofsky ◽  
Khalid Aziz
Keyword(s):  
Steady State ◽  
Steady State Flow ◽  
State Flow ◽  
Drift Flux ◽  
Three Phase

Calibration 7" – Cutthroat Flume as New Size for Discharge Measurement at Free Flow Condition

2020 ◽  
Vol 38 (12A) ◽  
pp. 1783-1789
Author(s):  
Jaafar S. Matooq ◽  
Muna J. Ibraheem
Keyword(s):  
Steady State ◽  
Flow Condition ◽  
Laboratory Experiments ◽  
Free Flow ◽  
Experimental Program ◽  
Steady State Flow ◽  
Empirical Formulas ◽  
State Flow ◽  
Operation Conditions ◽  
Throat Width

 This paper aims to conduct a series of laboratory experiments in case of steady-state flow for the new size 7 ̋ throat width (not presented before) of the cutthroat flume. For this size, five different lengths were adopted 0.535, 0.46, 0.40, 0.325 and 0.27m these lengths were adopted based on the limitations of the available flume. The experimental program has been followed to investigate the hydraulic characteristic and introducing the calibrated formula for free flow application within the discharge ranged between 0.006 and 0.025 m3/s. The calibration result showed that, under suitable operation conditions, the suggested empirical formulas can accurately predict the values of discharge within an error ± 3%.

A Graphical Method for Storage Coefficient Determination from Quasi-Steady State Flow Data

1996 ◽  
Vol 27 (4) ◽  
pp. 247-254 ◽  
Author(s):  
Zekâi Şen
Keyword(s):  
Steady State ◽  
Graphical Method ◽  
Pumping Test ◽  
Quasi Steady State ◽  
Flow Data ◽  
Steady State Flow ◽  
Storage Coefficient ◽  
State Flow ◽  
Aquifer Test

A simple, approximate but practical graphical method is proposed for estimating the storage coefficient independently from the transmissivity value, provided that quasi-steady state flow data are available from a pumping test. In the past, quasi-steady state flow distance-drawdown data have been used for the determination of transmissivity only. The method is applicable to confined and leaky aquifers. The application of the method has been performed for various aquifer test data available in the groundwater literature. The results are within the practical limits of approximation compared with the unsteady state flow solutions.

Sign in / Sign up

Export Citation Format

Share Document