Comparison of biting force and masticatory efficiency in patient with different denture base material

2018 ◽  
Vol 21 (4) ◽  
pp. 401-405
Author(s):  
Belal Al-Wakeel ◽  
Hassan M. Sakr ◽  
Yaser Baraka
2018 ◽  
Vol 21 (1) ◽  
pp. 87-91
Author(s):  
Wesam E Badr ◽  
Hassan M Sakr ◽  
Muhammad A Masoud ◽  
Mohamed A Quassem

2019 ◽  
Vol 2 (2) ◽  
Author(s):  
Ahmed Alagwany ◽  
Diab Fatoh ◽  
Mohamed Abbas ◽  
Mohamed A. Helal ◽  
Ihab I. Mahmoud

2016 ◽  
Vol 4 (2) ◽  
pp. 38
Author(s):  
Amer A. Taqa ◽  
Tarik Y. K. Bashi ◽  
Safwan M. Al –Aubadi

The objective of this study is to prepare and study chemical compounds for cleaning denture from locally available materials. The chemical compounds solutions were (sodium bicarbonate with alum), (sodium bicarbonate with citric acid), (sodium bicarbonate with apple vinegar), (sodium bicarbonate with clear commercial vinegar), (sodium bicarbonate with thyme oil), (saturated salt solution), (clear commercial vinegar), (alum). The main study, the effects of the chemical compounds solutions were evaluated on the (color, water Sorption and transverse strength) of heat cured denture base material. The t-test showed that the highest increase in optical density for the specimens immersed in (alum), (sodium bicarbonate +alum), (sodium bicarbonate + apple vinegar) solutions at 1/2 hr immersion and it increased more at 8 hrs immersion. The conclusions of this study showed that the safest prepared solutions on the denture base material that could be used as denture cleansers are (sodium bicarbonate{7g}with clear commercial vinegar{5ml}), (sodium bicarbonate {2g} with thyme oil {3.57g}), (saturated salt solution {40g}) at 1/2 hr and 8 hrs of immersion. While, (sodium bicarbonate {2g} with citric acid {4.57g}) solution appeared its safety at 1/2 hr immersion only.


2019 ◽  
Vol 10 (4) ◽  
pp. 658
Author(s):  
AngelMary Joseph ◽  
Suja Joseph ◽  
Nicholas Mathew ◽  
AshwinThomas Koshy ◽  
NamrathaL Jayalakshmi ◽  
...  

2018 ◽  
Vol 15 (4) ◽  
pp. 449-454
Author(s):  
Baghdad Science Journal

This work aims to investigate the tensile and compression strengths of heat- cured acrylic resin denture base material by adding styrene-butadiene (S- B) to polymethyl methacrylate (PMMA). The most well- known issue in prosthodontic practice is fracture of a denture base. All samples were a blend of (90%, 80%) PMMA and (10%, 20%) S- B powder melted in Oxolane (Tetra hydro furan). These samples were chopped down into specimens of dimensions 100x10x2.5mm to carry out the requirements of tensile tests. The compression strength test specimens were shaped into a cylinder with dimensions of 12.7mm in diameter and 20mm in length. The experimental results show a significant increase in both tensile and compression strengths when compared to control (standard) results for the preparation material.


Sign in / Sign up

Export Citation Format

Share Document