Comparative study of some properties of flexible and conventional heat cured acrylic resin denture base material

This work aims to investigate the tensile and compression strengths of heat- cured acrylic resin denture base material by adding styrene-butadiene (S- B) to polymethyl methacrylate (PMMA). The most well- known issue in prosthodontic practice is fracture of a denture base. All samples were a blend of (90%, 80%) PMMA and (10%, 20%) S- B powder melted in Oxolane (Tetra hydro furan). These samples were chopped down into specimens of dimensions 100x10x2.5mm to carry out the requirements of tensile tests. The compression strength test specimens were shaped into a cylinder with dimensions of 12.7mm in diameter and 20mm in length. The experimental results show a significant increase in both tensile and compression strengths when compared to control (standard) results for the preparation material.

Download Full-text

Denture Acrylic Resin Material with Antibacterial and Protein-Repelling Properties for the Prevention of Denture Stomatitis

Polymers ◽

10.3390/polym14020230 ◽

2022 ◽

Vol 14 (2) ◽

pp. 230

Author(s):

Salwa Omar Bajunaid ◽

Bashayer H. Baras ◽

Michael D. Weir ◽

Hockin H. K. Xu

Keyword(s):

Oral Mucosa ◽

Pathological Condition ◽

Base Material ◽

Acrylic Resin ◽

Control Group ◽

Control Groups ◽

Denture Base ◽

Denture Stomatitis ◽

Colony Forming Unit ◽

Bioactive Agents

Denture stomatitis is a multifactorial pathological condition of the oral mucosa that affects up to 72% of denture wearers. It is commonly seen on the palatal mucosa and characterized by erythema on the oral mucosa that are in contact with the denture surface. The aim of this study was to incorporate 2-methacryloyloxyethyl phosphorylcholine (MPC) and dimethylaminohexadecyl methacrylate (DMAHDM) into a high impact polymethylmethacrylate heat-cured denture base acrylic resin as a potential treatment for denture stomatitis. We used a comparative study design to examine the effect of incorporating MPC as a protein repellent agent and DMAHDM as an antifungal agent to prevent the adherence of Candida albicans to the denture base material. The dual incorporation of MPC and DMAHDM reduced C. albicans biofilm colony-forming unit by two orders of magnitude when compared to the control group devoid of the bioactive agents. Although the addition of MPC and DMAHDM alone or in combination significantly reduced the flexural strength of the material, they showed reduced roughness values when compared to control groups. This new denture acrylic resin provides the benefit of enhancing C. albicans biofilm elimination through dual mechanisms of action, which could potentially reduce the prevalence of denture stomatitis.

Download Full-text

Pengaruh minuman teh pada pemakai basis gigi tiruan nilon termoplastik terhadap penyerapan air dan stabilitas warnaThe effect of tea on the thermoplastic nylon denture base wearers on water absorption and colour stability

Jurnal Kedokteran Gigi Universitas Padjadjaran ◽

10.24198/jkg.v32i1.26371 ◽

2020 ◽

Vol 32 (1) ◽

pp. 66

Author(s):

Siti Wahyuni ◽

Chairunnisa Ricca

Keyword(s):

Water Absorption ◽

Base Material ◽

Acrylic Resin ◽

Polyamide 6 ◽

T Test ◽

Laboratory Research ◽

Colour Stability ◽

Denture Base ◽

Group A ◽

Group B

Pendahuluan: Nilon termoplastik merupakan basis gigi tiruan yang banyak diminati oleh para dokter gigi karena memiliki beberapa keuntungan dibandingkan bahan basis gigi tiruan resin akrilik. Diantara jenis nilon termoplastik yang sering dijadikan basis gigi tiruan adalah poliamida 6 dan poliamida mikrokristalin. Poliamida Mikrokristalin merupakan poliamida generasi baru yang dibuat untuk menanggulangi kelemahan pada poliamida sebelumnya. Tujuan penelitian ini adalah menganalisis pengaruh minuman teh pada pengguna gigi tiruan nilon termoplastik terhadap penyerapan air dan stabilitas warna. Metode: Jenis penelitian ini adalah experimental laboratoris. Jumlah sampel terdiri dari 40 dengan ukuran diameter 15 mm ± 1 mm dan ketebalan 0.5 mm ± 0,1 mm (ISO 4049) dan terbagi menjadi 4 kelompok (kelompok A poliamida 6 dan kelompok B poliamida mikrokristalin untuk penyerapan air serta kelompok C poliamida 6 dan kelompok D poliamida mikrokristalin untuk uji stabilitas warna). Semua sampel direndam dalam larutan teh selama 7 hari. Data dianalisis dengan uji T Independen. Gambaran mikroskopis sampel diuji dengan SEM Hasil: Berdasarkan uji T Independen hasil menunjukkan perbedaan yang signifikan diantara kelompok A dan B, C dan D. Uji T independen menunjukkan perbedaan yang signifikan diantara kelompok A dan B, C dan D (p=0,0001, p<0,05) Simpulan: Terdapat pengaruh minuman teh pada pengguna gigi tiruan nilon termoplastik. Poliamida Mikrokristalin memiliki penyerapan air yang lebih sedikit dan stabilitas warna yang lebih baik dibandingkan Poliamida 6.Kata kunci: Nilon termoplastik, poliamida 6, poliamida mikrokristalin, penyerapan air, stabilitas warna, SEM. ABSTRACTIntroduction: Thermoplastic nylon is a denture base mostly demanded by dentists due to its several advantages over acrylic resin denture base material. Among the types of thermoplastic nylon that are often used as denture bases are polyamide 6 and microcrystalline polyamide. Microcrystalline polyamide is the new generation of polyamides created to overcome the weaknesses of previous polyamides. The purpose of this study was to analyse the effect of tea on thermoplastic nylon denture wearers on water absorption and colour stability. Methods: This research was experimental laboratory research on 40 samples with a diameter of 15 mm ± 1 mm, and a thickness of 0.5 mm ± 0.1 mm (ISO 4049), divided into four groups (Group A was the polyamide 6; Group B was the microcrystalline polyamide on the water absorption; Group C was polyamide 6; and Group D was microcrystalline polyamide on the colour stability). All samples were immersed in the tea solutions for 7 days. Data were analysed with independent t-test. The microscopic structure was analysed using the scanning electron microscope (SEM). Results: The results showed significant differences between group A, B, C, and D. The independent t-test also showed significant differences between group A, B, C, and D (p = 0.000; p < 0.05). Conclusion: There is an effect of tea on the thermoplastic nylon denture wearers. Microcrystalline polyamides have less water absorption and better colour stability than Polyamide 6.Keywords: Polyamide 6, thermoplastic nylon, microcrystalline polyamide, water absorption, colour stability, SEM.

Download Full-text