scholarly journals Heavy ion fusion program, Argonne National Laboratory. Annual progress report, fiscal year 1978

1978 ◽  
Author(s):  
Not Given Author

2002 ◽  
Vol 20 (4) ◽  
pp. 617-620 ◽  
Author(s):  
A. FALTENS ◽  
A. LIETZKE ◽  
G. SABBI ◽  
P. SEIDL ◽  
S. LUND ◽  
...  

The heavy ion fusion program is developing single aperture superconducting quadrupoles based on NbTi conductor, for use in the High Current Experiment at Lawrence Berkeley National Laboratory. Following the fabrication and testing of prototypes using two different approaches, a baseline design has been selected and further optimized. A prototype cryostat for a quadrupole doublet, with features to accommodate induction acceleration modules, is being fabricated. The single aperture magnet was derived from a conceptual design of a quadrupole array magnet for multibeam transport. Progress on the development of superconducting quadrupole arrays for future experiments is also reported.



10.2172/67733 ◽  
1995 ◽  
Author(s):  
J.K. Bates ◽  
J.A. Fortner ◽  
P.A. Finn ◽  
D.J. Wronkiewicz ◽  
J.C. Hoh ◽  
...  


Author(s):  
Charles W. Allen ◽  
Robert C. Birtcher

The uranium silicides, including U3Si, are under study as candidate low enrichment nuclear fuels. Ion beam simulations of the in-reactor behavior of such materials are performed because a similar damage structure can be produced in hours by energetic heavy ions which requires years in actual reactor tests. This contribution treats one aspect of the microstructural behavior of U3Si under high energy electron irradiation and low dose energetic heavy ion irradiation and is based on in situ experiments, performed at the HVEM-Tandem User Facility at Argonne National Laboratory. This Facility interfaces a 2 MV Tandem ion accelerator and a 0.6 MV ion implanter to a 1.2 MeV AEI high voltage electron microscope, which allows a wide variety of in situ ion beam experiments to be performed with simultaneous irradiation and electron microscopy or diffraction.At elevated temperatures, U3Si exhibits the ordered AuCu3 structure. On cooling below 1058 K, the intermetallic transforms, evidently martensitically, to a body-centered tetragonal structure (alternatively, the structure may be described as face-centered tetragonal, which would be fcc except for a 1 pet tetragonal distortion). Mechanical twinning accompanies the transformation; however, diferences between electron diffraction patterns from twinned and non-twinned martensite plates could not be distinguished.



Sign in / Sign up

Export Citation Format

Share Document