COMPUTATIONAL FLUID DYNAMICS (CFD) MODELING USED TO ASSESS THE FATE OF FLUSHABLE SOLID CONSUMER PRODUCTS IN SEPTIC TANKS

2002 ◽  
Vol 2002 (13) ◽  
pp. 62-78
Author(s):  
John E. Richardson ◽  
Drew C. McAvoy ◽  
Bruce Low ◽  
Ryan Edison
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Consumer Products ◽  
Cfd Modeling ◽  
Septic Tanks ◽  
Computational Fluid Dynamics Cfd

scholarly journals THE COMBUSTION ENGINE INTAKE MANIFOLD CFD MODELING DEPENDING ON THE AIRBOX CONFIGURATION

2021 ◽  
Vol 2021 (6) ◽  
pp. 5421-5425
Author(s):  
MICHAL RICHTAR ◽  
◽  
PETRA MUCKOVA ◽  
JAN FAMFULIK ◽  
JAKUB SMIRAUS ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Stationary Flow ◽  
Cfd Modeling ◽  
Intake Manifold ◽  
Combustion Engines ◽  
Computational Fluid Dynamics Cfd

The aim of the article is to present the possibilities of application of computational fluid dynamics (CFD) to modelling of air flow in combustion engine intake manifold depending on airbox configuration. The non-stationary flow occurs in internal combustion engines. This is a specific type of flow characterized by the fact that the variables depend not only on the position but also on the time. The intake manifold dimension and geometry strongly effects intake air amount. The basic target goal is to investigate how the intake trumpet position in the airbox impacts the filling of the combustion chamber. Furthermore, the effect of different distances between the trumpet neck and the airbox wall in this paper will be compared.

scholarly journals Computational Fluid Dynamics (CFD) Modeling of Photochemical Reactors

10.5772/26468 ◽  
2012 ◽  
Author(s):  
Masroor Mohajerani ◽  
Mehrab Mehrvar ◽  
Farhad Ein-Mozaffari
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Cfd Modeling ◽  
Computational Fluid Dynamics Cfd

An Assessment of Computational Fluid Dynamics Cavitation Models Using Bubble Growth Theory and Bubble Transport Modeling

2019 ◽  
Vol 141 (4) ◽  
Author(s):  
Michael P. Kinzel ◽  
Jules W. Lindau ◽  
Robert F. Kunz
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Analytic Solutions ◽  
Cfd Modeling ◽  
Computational Time ◽  
Cavitation Model ◽  
Modeling Framework ◽  
Homogeneous Models ◽  
Bubble Transport ◽  
Computational Fluid Dynamics Cfd

This effort investigates advancing cavitation modeling relevant to computational fluid dynamics (CFD) through two strategies. The first aims to reformulate the cavitation models and the second explores adding liquid–vapor slippage effects. The first aspect of the paper revisits cavitation model formulations with respect to the Rayleigh–Plesset equation (RPE). The present approach reformulates the cavitation model using analytic solutions to the RPE. The benefit of this reformulation is displayed by maintaining model sensitivities similar to RPE, whereas the standard models fail these tests. In addition, the model approach is extended beyond standard homogeneous models, to a two-fluid modeling framework that explicitly models the slippage between cavitation bubbles and the liquid. The results indicate a significant impact of slip on the predicted cavitation solution, suggesting that the inclusion of such modeling can potentially improve CFD cavitation models. Overall, the results of this effort point to various aspects that may be considered in future CFD-modeling efforts with the goal of improving the model accuracy and reducing computational time.

Field-Scale Computational Fluid Dynamics CFD Modeling of Proppant Transport and Distribution Within a Horizontal Hydraulic Fracturing Stage

2020 ◽  
Author(s):  
Abdulraof Almulhim ◽  
Brent Kebert ◽  
Jennifer Miskimins ◽  
William Hunter ◽  
Gage Soehner
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Hydraulic Fracturing ◽  
Cfd Modeling ◽  
Field Scale ◽  
Proppant Transport ◽  
Computational Fluid Dynamics Cfd

scholarly journals Biomagnetic Monitoring vs. CFD Modeling: A Real Case Study of Near-Source Depositions of Traffic-Related Particulate Matter along a Motorway

Atmosphere ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1285
Author(s):  
Sarah Letaïef ◽  
Pierre Camps ◽  
Thierry Poidras ◽  
Patrick Nicol ◽  
Delphine Bosch ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Particulate Matter ◽  
Cfd Simulation ◽  
Low Cost ◽  
Precast Concrete ◽  
Cfd Modeling ◽  
Concrete Wall ◽  
Fluorescence Measurements ◽  
Computational Fluid Dynamics Cfd

A test site located along a 12-lane motorway east of Montpellier, France, is used to evaluate the potential of biomagnetic monitoring on traffic-related particulate matter (PM) to parametrize a computational fluid dynamics (CFD) simulation of the local airflow. Two configurations were established on the site with three vegetated flat-top earth berms of a basic design, and a fourth one was located windward to the traffic roofed with a 4-m-high precast concrete wall. As a first step, PM deposition simultaneously on plant leaves, on low-cost passive artificial filters, and on soils was estimated from proxies supplied by magnetic and X-ray fluorescence measurements on both sides of the motorway. These latter revealed that traffic-related pollutants are present on soils samples highlighted with a clear fingerprint of combustion residues, and wears of breaks, vehicles, and highway equipment. Maximum PM accumulations were detected in the lee of the berm–wall combination, while no significant deposition was observed on both sides of the flat-top earth berms. These results are in line with measurements from PM µ-sensors operated by the regional state-approved air quality agency. Finally, we compared the experimental measurements with the outcomes of a computational fluid dynamics (CFD) modeling based on the Reynolds-Averaged Navier–Stokes (RANS) equations that consider the traffic-induced momentum and turbulence. The CFD modeling matches the experimental results by predicting a recirculated flow in the near wake of the berm–wall combination that enhances the PM concentration, whereas the flat-top berm geometry does not alter the pollutants’ transport and indeed contributes to their atmospheric dispersion.

Transport Enhancement in Tunable Laser Cavity Sensor

2002 ◽  
Author(s):  
M. Sigurdson ◽  
C. Meinhart ◽  
D. Wang ◽  
X. Liu ◽  
J. J. Feng ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Design Optimization ◽  
Tunable Laser ◽  
Laser Cavity ◽  
Cfd Modeling ◽  
Physical Processes ◽  
Transport Enhancement ◽  
Computational Fluid Dynamics Cfd ◽  
Electrothermal Flow

Dielectrophoresis and Electrothermal Flow are two physical processes investigated for enhancing transport of antigen to a region of immobilized conjugate antibodies on an immunosensor surface. Computational fluid dynamics (CFD) modeling is employed to understand these phenomena in detail to aid in the design optimization of the device.

Computational Fluid Dynamics (CFD) Modeling in Membrane‐Based Desalination Technologies

2020 ◽  
pp. 47-143
Author(s):  
Pelin Yazgan‐Birgi ◽  
Mohamed I. Hassan Ali ◽  
Hassan A. Arafat
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Cfd Modeling ◽  
Computational Fluid Dynamics Cfd
Sign in / Sign up

Export Citation Format

Share Document