scholarly journals Applicability on dynamicc verification method for seismic design of steel bridge piers.

2002 ◽  
pp. 181-190
Author(s):  
Kunihiro MORISHITA ◽  
Tsutomu USAMI ◽  
Takahito BANNO ◽  
Akira KASAI
Keyword(s):  
Seismic Design ◽  
Bridge Piers ◽  
Steel Bridge ◽  
Verification Method

Seismic Design of Concrete-Filled Circular Steel Bridge Piers

2004 ◽  
Vol 9 (1) ◽  
pp. 24-34 ◽  
Author(s):  
Michel Bruneau ◽  
Julia Marson
Keyword(s):  
Seismic Design ◽  
Bridge Piers ◽  
Steel Bridge

scholarly journals Experimental Study on the Behavior of Existing Reinforced Concrete Multi-Column Piers under Earthquake Loading

2021 ◽  
Vol 11 (6) ◽  
pp. 2652
Author(s):  
Jung Han Kim ◽  
Ick-Hyun Kim ◽  
Jin Ho Lee
Keyword(s):  
Seismic Performance ◽  
Seismic Design ◽  
Bridge Piers ◽  
Scale Model ◽  
Inertia Force ◽  
Small Scale ◽  
Lap Splice ◽  
Existing Structures ◽  
Seismic Design Code ◽  
Seismic Force

When a seismic force acts on bridges, the pier can be damaged by the horizontal inertia force of the superstructure. To prevent this failure, criteria for seismic reinforcement details have been developed in many design codes. However, in moderate seismicity regions, many existing bridges were constructed without considering seismic detail because the detailed seismic design code was only applied recently. These existing structures should be retrofitted by evaluating their seismic performance. Even if the seismic design criteria are not applied, it cannot be concluded that the structure does not have adequate seismic performance. In particular, the performance of a lap-spliced reinforcement bar at a construction joint applied by past practices cannot be easily evaluated analytically. Therefore, experimental tests on the bridge piers considering a non-seismic detail of existing structures need to be performed to evaluate the seismic performance. For this reason, six small scale specimens according to existing bridge piers were constructed and seismic performances were evaluated experimentally. The three types of reinforcement detail were adjusted, including a lap-splice for construction joints. Quasi-static loading tests were performed for three types of scale model with two-column piers in both the longitudinal and transverse directions. From the test results, the effect on the failure mechanism of the lap-splice and transverse reinforcement ratio were investigated. The difference in failure characteristics according to the loading direction was investigated by the location of plastic hinges. Finally, the seismic capacity related to the displacement ductility factor and the absorbed energy by hysteresis behavior for each test were obtained and discussed.

Sign in / Sign up

Export Citation Format

Share Document