EDFA and Optical Fiber Repositioning in an Optical Fiber Communication Network
Abstract: This study shows an easy and effective design of an optical fiber communication system, which demonstrates EDFA's ideal position in the whole system. In recent years, erbium-doped fiber amplifiers (EDFAs) have been more attentive with the development of high-speed and long-distance data transmission systems. In our research, EDFA's forward pump capacity is maintained at 100mW, and our three configurations modify and analyze the location of EDFA. First configuration is meant to place EDFA before optical fiber in the entire system. The second arrangement has been intended such that EDFA will precede optical fiber. EDFA is inserted in the third configuration between the optical fiber length. For the three setups, the BER, Q factor and output power level were observed, with the setup one having minimal BER, setup two with the greatest power, and setup three with the maximum Q factor. This paper discusses the causes behind these results and designers may construct an optical fiber communication system in the most efficient and reliable fashion by taking those results into consideration. The simulation was performed in Opti-System software. Keywords: EDFA, BER, Q factor, Analyzer, Optical fibre
