scholarly journals Formalismo variacional en el modelado y control de sistemas de levitación magnética

2021 ◽  
Author(s):  
◽  
Victor Rolando Jara González

In this thesis he addressed the controlled Lagrangian control technique in two magnetic levitation systems, these being the fundamental object of study. An analysis of the natural dynamics of three mechanical systems was made; a simple pendulum, two pendulums attached to a xed beam and an inverted pendulum on a cart, which served to understand from a physical-mathematical point of view the presentation of the Lagrangian formalism. This analysis in mechanical systems was the basis in the study of the natural dynamics of the magnetic levitation systems treated. A geometrical stability analysis was also carried out, both for the mechanical systems and for the magnetic levitation systems; this constitutes the rst novelty as a result of the work. The presentation of the controlled Lagrangian control technique was explained in detail, taking as an example the inverted pendulum system on the cart, to later be implemented in magnetic levitation systems. The results obtained were satisfactory, demonstrating with them that this control technique makes sense in magnetic levitation systems, until now simple. From the mathematical point of view, the establishment of a control law in these magnetic levitation systems guarantees their stability in the understanding that the controlled dynamics will be equal to the desired one.

2016 ◽  
Vol 851 ◽  
pp. 445-448 ◽  
Author(s):  
Yang Hua ◽  
Zi Jian Yang

Inverted pendulum control system is a complex, nonlinear, unstable system. This design on the basis of studying the law of motion of the inverted pendulum, build its trajectory mathematical model, using MATLAB simulation analysis, after understanding of inverted pendulum model, use k60 micro controller combined with PID algorithm gives the signal driven dc gear motor, and then to control the inverted pendulum system, used in the process of standing on your head swinging rod Angle encoder acquisition, processing, the Angle of swinging rod feedback on point of view, the direction of the angular velocity, the motor running direction, adjusting handstand pendulum rod by using PD algorithm, PI parameters to adjust motor speed, by double circuit PD/PI control scheme realizes the rotating arm swinging rod Angle and position closed loop control at the same time.


2021 ◽  
Author(s):  
Omid Mofid ◽  
Khalid A Alattas ◽  
Saleh Mobayen

Abstract In this paper, an adaptive proportional-integral-derivative (PID) sliding mode control method combined with super-twisting algorithm is designed for the stabilization control of rotary inverted pendulum system in the appearance of exterior perturbation. The state-space model of rotary inverted pendulum in the presence of exterior disturbance is obtained. Then, the super-twisting PID sliding mode controller is designed for finite time stability control of this underactuated control system. The upper bounds of perturbation are presumed to be unknown; accordingly, the adaptive control procedure is taken to approximate the uncertain bound of the external disturbances. The stability control of rotary inverted pendulum system is proved by means of the Lyapunov stability theory. In order to validate accuracy and efficiency of the recommended control technique, some simulation outcomes are prepared and compared with other existing method. Moreover, experimental results are implemented to show the success of the proposed method.


Author(s):  
Mohammad Javad Mahmoodabadi ◽  
Sadegh Hadipour Lakmesari

In this paper, a multi-objective artificial bee colony (MOABC) optimization algorithm is utilized to improve the performance of an adaptive robust control technique. This approach is implemented on an inverted pendulum system. More precisely, the proposed controller is a combination of a decoupled sliding mode controller (DSMC) and adaption laws based on the gradient descent approach. In order to achieve the optimum control operation, the MOABC, as a novel meta-heuristic method simulated from the smart foraging activity of honey bee groups, is employed to optimize the coefficients of the suggested controller. In this regard, the objective functions are determined as the integral time of the absolute value of the pole angle and cart position errors. Finally, the time responses of the system states and control effort are presented to prove the effectiveness and feasibility of the suggested strategy compared to other contemporary studies referenced in the paper.


1991 ◽  
Vol 111 (3) ◽  
pp. 221-229 ◽  
Author(s):  
Motomiki Uchida ◽  
Yukihiro Toyoda ◽  
Yoshikuni Akiyama ◽  
Kazushi Nakano ◽  
Hideo Nakamura

2016 ◽  
Vol 9 (3) ◽  
pp. 167 ◽  
Author(s):  
Muhammad Sani Gaya ◽  
Anas Abubakar Bisu ◽  
Syed Najib Syed Salim ◽  
I. S. Madugu ◽  
L. A. Yusuf ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document