scholarly journals Stagnation-point flow past a shrinking sheet in a nanofluid

Open Physics ◽  
2011 ◽  
Vol 9 (5) ◽  
Author(s):  
Roslinda Nazar ◽  
Mihaela Jaradat ◽  
Norihan Arifin ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Friction Coefficient ◽  
Nonlinear System ◽  
Differential Equations ◽  
Skin Friction ◽  
Stagnation Point ◽  
Volume Fraction ◽  
Skin Friction Coefficient ◽  
Stagnation Point Flow ◽  
Shrinking Sheet

AbstractIn this paper, the stagnation-point flow and heat transfer towards a shrinking sheet in a nanofluid is considered. The nonlinear system of coupled partial differential equations was transformed and reduced to a nonlinear system of coupled ordinary differential equations, which was solved numerically using the shooting method. Numerical results were obtained for the skin friction coefficient, the local Nusselt number as well as the velocity and temperature profiles for some values of the governing parameters, namely the nanoparticle volume fraction φ, the shrinking parameter λand the Prandtl number Pr. Three different types of nanoparticles are considered, namely Cu, Al2O3 and TiO2. It was found that nanoparticles of low thermal conductivity, TiO2, have better enhancement on heat transfer compared to nanoparticles Al2O3 and Cu. For a particular nanoparticle, increasing the volume fraction φ results in an increase of the skin friction coefficient and the heat transfer rate at the surface. It is also found that solutions do not exist for larger shrinking rates and dual solutions exist when λ < −1.0.

scholarly journals Unsteady Stagnation Point Flow of Hybrid Nanofluid Past a Convectively Heated Stretching/Shrinking Sheet with Velocity Slip

Mathematics ◽  
2020 ◽  
Vol 8 (10) ◽  
pp. 1649
Author(s):  
Nurul Amira Zainal ◽  
Roslinda Nazar ◽  
Kohilavani Naganthran ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Skin Friction ◽  
Stagnation Point ◽  
Volume Fraction ◽  
Velocity Slip ◽  
Slip Condition ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid

Unsteady stagnation point flow in hybrid nanofluid (Al2O3-Cu/H2O) past a convectively heated stretching/shrinking sheet is examined. Apart from the conventional surface of the no-slip condition, the velocity slip condition is considered in this study. By incorporating verified similarity transformations, the differential equations together with their partial derivatives are changed into ordinary differential equations. Throughout the MATLAB operating system, the simplified mathematical model is clarified by employing the bvp4c procedure. The above-proposed approach is capable of producing non-uniqueness solutions when adequate initial assumptions are provided. The findings revealed that the skin friction coefficient intensifies in conjunction with the local Nusselt number by adding up the nanoparticles volume fraction. The occurrence of velocity slip at the boundary reduces the coefficient of skin friction; however, an upward trend is exemplified in the rate of heat transfer. The results also signified that, unlike the parameter of velocity slip, the increment in the unsteady parameter conclusively increases the coefficient of skin friction, and an upsurge attribution in the heat transfer rate is observed resulting from the increment of Biot number. The findings are evidenced to have dual solutions, which inevitably contribute to stability analysis, hence validating the feasibility of the first solution.

scholarly journals Unsteady MHD Mixed Convection Flow in Hybrid Nanofluid at Three-Dimensional Stagnation Point

Mathematics ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 549
Author(s):  
Nurul Amira Zainal ◽  
Roslinda Nazar ◽  
Kohilavani Naganthran ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Friction Coefficient ◽  
Differential Equations ◽  
Mixed Convection ◽  
Skin Friction ◽  
Stagnation Point ◽  
Three Dimensional ◽  
Skin Friction Coefficient ◽  
Stagnation Point Flow ◽  
Hybrid Nanofluid

There has been significant interest in exploring a stagnation point flow due to its numerous potential uses in engineering applications such as cooling of nuclear reactors. Hence, this study proposed a numerical analysis on the unsteady magnetohydrodynamic (MHD) mixed convection at three-dimensional stagnation point flow in Al2O3–Cu/H2O hybrid nanofluid over a permeable sheet. The ordinary differential equations are accomplished by simplifying the governing partial differential equations through suitable similarity transformation. The numerical computation is established by the MATLAB system software using the bvp4c technique. The bvp4c procedure is excellent in providing more than one solution once sufficient predictions are visible. The influence of certain functioning parameters is inspected, and notable results exposed that the rate of heat transfer is exaggerated along with the skin friction coefficient while the suction/injection and magnetic parameters are intensified. The results also signified that the rise in the volume fraction of the nanoparticle and the decline of the unsteadiness parameter demonstrates a downward attribution towards the heat transfer performance and skin friction coefficient. Conclusively, the observations are confirmed to have multiple solutions, which eventually contribute to an investigation of the analysis of the solution stability, thereby justifying the viability of the first solution.

scholarly journals Homann Stagnation Point Flow and Heat Transfer of Hybrid Nanofluids Over a Permeable Radially Stretching/Shrinking Sheet

2021 ◽  
Vol 85 (1) ◽  
pp. 101-112
Author(s):  
Yap Bing Kho ◽  
Rahimah Jusoh ◽  
Mohd Zuki Salleh ◽  
Mohd Hisyam Ariff ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Volume Fraction ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Nanoparticle Volume Fraction ◽  
Flow And Heat Transfer ◽  
Hybrid Nanofluids ◽  
Water Base

The steady two-dimensional Homan stagnation point flow and heat transfer of water base hybrid nanofluids (Al2O3 & Cu) over a permeable radially stretching/shrinking sheet have been studied. The similarity variables are introduced to transform the partial differential equations of the model into the ordinary differential equations. Numerical findings and dual solutions have been carried out by implementing the bvp4c code through MATLAB software. The most prominent effect is illustrated in the boundary layer thickness where the velocity profile increases upon the increment of the suction intensity but decreases in the temperature profile. Besides, the reduced Nusselt number also decreases as enlarging the value of copper and alumina nanoparticle volume fraction. The analysis of the first and second solutions are presented graphically with critical values as well as the detail discussions on the effects of the other involving parameters.

Oblique stagnation-point flow of a nanofluid past a shrinking sheet

2016 ◽  
Vol 26 (1) ◽  
pp. 189-213 ◽  
Author(s):  
M M Rahman ◽  
Teodor Grosan ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Brownian Motion ◽  
Differential Equations ◽  
Strain Rate ◽  
Stagnation Point ◽  
Volume Fraction ◽  
Flow Behavior ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type

Purpose – The laminar two-dimensional stagnation-point flow and heat transfer of a viscous incompressible nanofluid obliquely impinging on a shrinking surface is formulated as a similarity solution of the Navier-Stokes, energy and concentration equations. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. The effect of the dimensionless strain rate, shrinking parameter, Brownian motion parameter and thermophoresis parameter on the flow, temperature and nanoparticle volume fraction is investigated in details. The paper aims to discuss these issues. Design/methodology/approach – The transformed system of ordinary differential equations was solved using the function bvp4c from Matlab. The relative tolerance was set to 10−10. Findings – It is found that dimensionless strain rate and shrinking parameter causes a shift in the position of the point of zero skin friction along the stretching sheet. Obliquity of the flow toward the surface increases as the strain rate intensifies. The results indicate that dual solutions exist for the opposing flow case. Research limitations/implications – The problem is formulated for an incompressible nanofluid with no chemical reactions, dilute mixture, negligible viscous dissipation and negligible radiative heat transfer assuming nanoparticles and base fluid are locally in thermal equilibrium. Beyond the critical point λ c to obtain further solutions, the full basic partial differential equations have to be solved. Originality/value – The present results are original and new for the oblique stagnation-point flow of a nanofluid past a shrinking sheet. Therefore, this study would be important for the researchers working in the relatively new area of nanofluids in order to become familiar with the flow behavior and properties of such nanofluids.

scholarly journals Magnetohydrodynamic Flow and Heat Transfer Over an Exponentially Stretching/Shrinking Sheet in Ferrofluids

2021 ◽  
Vol 29 (3) ◽  
Author(s):  
Nurfazila Rasli ◽  
Norshafira Ramli
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Differential Equations ◽  
Skin Friction ◽  
Skin Friction Coefficient ◽  
Magnetohydrodynamic Flow ◽  
Shrinking Sheet ◽  
Flow And Heat Transfer ◽  
Exponentially Stretching

In this research, the problem of magnetohydrodynamic flow and heat transfer over an exponentially stretching/shrinking sheet in ferrofluids is presented. The governing partial differential equations are transformed into nonlinear ordinary differential equations by applying suitable similarity transformations. These equations are then solved numerically using the shooting method for some pertinent parameters. For this research, the water-based ferrofluid is considered with three types of ferroparticles: magnetite, cobalt ferrite, and manganese-zinc ferrite. The numerical solutions on the skin friction coefficient, Nusselt number, velocity and temperature profiles influenced by the magnetic parameter, wall mass transfer parameter, stretching/shrinking parameter, and volume fraction of solid ferroparticle are graphically displayed and discussed in more details. The existences of dual solutions are noticeable for the stretching/shrinking case in a specific range of limit. For the first solution, an increasing number in magnetic and suction will also give an increment of skin friction coefficient and Nusselt number over stretching/shrinking sheet. For the skin friction coefficient only, it is showed a decreasing pattern after the intersection. Besides, the presence of ferroparticles in the fluids causes a high number of the fluid’s thermal conductivity and heat transfer rate.

Melting heat transfer in boundary layer stagnation-point flow of a nanofluid towards a stretching–shrinking sheet

2014 ◽  
Vol 92 (12) ◽  
pp. 1703-1708 ◽  
Author(s):  
Kishore Kumar Ch. ◽  
Shankar Bandari
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Skin Friction Coefficient ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Shooting Technique ◽  
Similarity Transformations ◽  
Flow And Heat Transfer ◽  
Fourth Order Method

The present analysis deals with the study of two-dimensional stagnation-point flow and heat transfer from a warm, laminar liquid flow of a nanofluid towards a melting stretching sheet. Using similarity transformations, the governing differential equations were transformed into coupled, nonlinear ordinary differential equations, which were then solved numerically by using the Runge–Kutta fourth-order method along with the shooting technique for two types of nanoparticles namely copper (Cu) and silver (Ag) in the water-based fluid with Prandtl number Pr = 6.2, the skin friction coefficient, the local Nusselt number, the velocity and the temperature profiles are presented graphically and discussed.

Flow and Heat Transfer in a Newtonian Nanoliquid due to a Curved Stretching Sheet

2017 ◽  
Vol 72 (9) ◽  
pp. 833-842 ◽  
Author(s):  
Pradeep Ganapathi Siddheshwar ◽  
Meenakshi Nerolu ◽  
Igor Pažanin
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Differential Equations ◽  
Skin Friction ◽  
Stretching Sheet ◽  
Volume Fraction ◽  
Nonlinear Partial Differential Equations ◽  
Skin Friction Coefficient ◽  
Variable Coefficients

AbstractFlow of a Newtonian nanoliquid due to a curved stretching sheet and heat transfer in it is studied. The governing nonlinear partial differential equations are reduced to nonlinear ordinary differential equations with variable coefficients by using a similarity transformation. The flow characteristics are studied using plots of flow velocity components and the skin-friction coefficient as a function of suction-injection parameter, curvature, and volume fraction. Prescribed surface temperature and prescribed surface heat flux are considered for studying the temperature distribution in the flow. The thermophysical properties of 20 nanoliquids are considered in the investigation by modeling them through the use of phenomenological laws and mixture theory. The results of the corresponding problem involving a plane stretching sheet is obtained as a particular case of those obtained in the present paper. Skin friction coefficient and Nusselt number are evaluated and it is observed that skin friction coefficient decreases with concentration of nanoparticles in the absence as well as presence of suction where as Nusselt number increases with increase in concentration of nanoparticles in a dilute range.

scholarly journals Mixed Convection Flow of Powell–Eyring Nanofluid near a Stagnation Point along a Vertical Stretching Sheet

Mathematics ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 364
Author(s):  
Nadhirah Abdul Halim ◽  
Noor Fadiya Mohd Noor
Keyword(s):  
Heat Transfer ◽  
Brownian Motion ◽  
Friction Coefficient ◽  
Differential Equations ◽  
Mixed Convection ◽  
Skin Friction ◽  
Stagnation Point ◽  
Buoyancy Force ◽  
Skin Friction Coefficient ◽  
Transfer Rates

A stagnation-point flow of a Powell–Eyring nanofluid along a vertical stretching surface is examined. The buoyancy force effect due to mixed convection is taken into consideration along with the Brownian motion and thermophoresis effect. The flow is investigated under active and passive controls of nanoparticles at the surface. The associating partial differential equations are converted into a set of nonlinear, ordinary differential equations using similarity conversions. Then, the equations are reduced to first-order differential equations before further being solved using the shooting method and bvp4c function in MATLAB. All results are presented in graphical and tabular forms. The buoyancy parameter causes the skin friction coefficient to increase in opposing flows but to decrease in assisting flows. In the absence of buoyancy force, there is no difference in the magnitude of the skin friction coefficient between active and passive controls of the nanoparticles. Stagnation has a bigger influence under passive control in enhancing the heat transfer rate as compared to when the fluid is under active control. Assisting flows have better heat and mass transfer rates with a lower magnitude of skin friction coefficient as compared to opposing flows. In this case, the nanofluid parameters, the Brownian motion, and thermophoresis altogether reduce the overall heat transfer rates of the non-Newtonian nanofluid.

scholarly journals Unsteady Stagnation Point Flow and Heat Transfer over a Stretching/Shrinking Sheet with Suction or Injection

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
M. Suali ◽  
N. M. A. Nik Long ◽  
N. M. Ariffin
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Similarity Transformation ◽  
Skin Friction Coefficient ◽  
Dual Solutions ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Flow And Heat Transfer ◽  
Suction Or Injection

The unsteady stagnation point flow and heat transfer over a stretching/shrinking sheet with suction/injection is studied. The governing partial differential equations are converted into nonlinear ordinary differential equations using a similarity transformation and solved numerically. Both stretching and shrinking cases are considered. Results for the skin friction coefficient, local Nusselt number, velocity, and temperature profiles are presented for different values of the governing parameters. It is found that the dual solutions exist for the shrinking case, whereas the solution is unique for the stretching case. Numerical results show that the range of dual solutions increases with mass suction and decreases with mass injection.

Stability analysis on the stagnation-point flow and heat transfer over a permeable stretching/shrinking sheet with heat source effect

2018 ◽  
Vol 28 (11) ◽  
pp. 2650-2663 ◽  
Author(s):  
Fatinnabila Kamal ◽  
Khairy Zaimi ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Stability Analysis ◽  
Heat Source ◽  
Skin Friction ◽  
Stagnation Point ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type ◽  
Source Effect ◽  
Flow And Heat Transfer

PurposeThis paper aims to analyze the behavior of the stagnation-point flow and heat transfer over a permeable stretching/shrinking sheet in the presence of the viscous dissipation and heat source effects.Design/methodology/approachThe governing partial differential equations are converted into ordinary differential equations by similarity transformations before being solved numerically using the bvp4c function built in Matlab software. Effects of suction/injection parameter and heat source parameter on the skin friction and heat transfer coefficients as well as the velocity and temperature profiles are presented in the forms of tables and graphs. A temporal stability analysis will be conducted to verify which solution is stable for the dual solutions exist for the shrinking case.FindingsThe analysis indicates that the skin friction coefficient and the local Nusselt number as well as the velocity and temperature were influenced by suction/injection parameter. In contrast, only the local Nusselt number, which represents heat transfer rate at the surface, was affected by heat source effect. Further, numerical results showed that dual solutions were found to exist for the certain range of shrinking case. Then, the stability analysis is performed, and it is confirmed that the first solution is linearly stable and has real physical implication, while the second solution is not.Practical implicationsIn practice, the study of the steady two-dimensional stagnation-point flow and heat transfer past a permeable stretching/shrinking sheet in the presence of heat source effect is very crucial and useful. The problems involving fluid flow over stretching or shrinking surfaces can be found in many industrial manufacturing processes such as hot rolling, paper production and spinning of fibers. Owing to the numerous applications, the study of stretching/shrinking sheet was subsequently extended by many authors to explore various aspects of skin friction coefficient and heat transfer in a fluid. Besides that, the study of suction/injection on the boundary layer flow also has important applications in the field of aerodynamics and space science.Originality/valueAlthough many studies on viscous fluid has been investigated, there is still limited discoveries found on the heat source and suction/injection effects. Indeed, this paper managed to obtain the second (dual) solutions and stability analysis is performed. The authors believe that all the results are original and have not been published elsewhere.

Sign in / Sign up

Export Citation Format

Share Document