scholarly journals Three-dimensional multigrid Reynolds-averaged Navier-Stokes solver for unstructured meshes

AIAA Journal ◽  
1995 ◽  
Vol 33 (3) ◽  
pp. 445-453 ◽  
Author(s):  
D. J. Mavriplis
Keyword(s):  
Three Dimensional ◽  
Unstructured Meshes ◽  
Navier Stokes ◽  
Reynolds Averaged Navier Stokes

Forced Response Variation of Aerodynamically and Structurally Mistuned Turbo-Machinery Rotors

2006 ◽  
Author(s):  
I. Sladojevic´ ◽  
E. P. Petrov ◽  
M. Imregun ◽  
A. I. Sayma
Keyword(s):  
Three Dimensional ◽  
Forced Response ◽  
Navier Stokes ◽  
Fe Model ◽  
Frequency Shifts ◽  
Aero Engine ◽  
Different Types ◽  
Aerodynamic Parameters ◽  
Reynolds Averaged Navier Stokes ◽  
Response Variation

The paper presents the results of a study looking into changes in the forced response levels of bladed disc assemblies subject to both structural and aerodynamic mistuning. A whole annulus FE model, representative of a civil aero-engine fan with 26 blades was used in the calculations. The forced response of all blades of 1000 random mistuned patterns was calculated. The aerodynamic parameters, frequency shifts and damping, were calculated using a three-dimensional Reynolds-averaged Navier-Stokes aero-elasticity code. They were randomly varied for each mistuning pattern, with the assumption that the system would remain stable, i.e. flutter would not occur due to aerodynamic mistuning. The results show the variation of the forced response with different types of mistuning, with structural mistuning only, with aerodynamic mistuning only and with both structural and aerodynamic mistuning.

A Reynolds-Averaged Navier-Stokes Solver in a Turbomachinery Design System

2007 ◽  
Author(s):  
Fahua Gu ◽  
Mark R. Anderson
Keyword(s):  
Turbulence Model ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Integrated Design ◽  
Navier Stokes ◽  
Design System ◽  
Navier Stokes Equations ◽  
Wall Functions ◽  
Machine Performance ◽  
Reynolds Averaged Navier Stokes

The design of turbomachinery has been focusing on the improvement of the machine efficiency and the reduction of the design cost. This paper presents an integrated design system to create the machine geometry and to predict the machine performance at different levels of approximation, including one-dimensional design and analysis, quasi-three-dimensional-(blade-to-blade, throughflow) and full-three-dimensional-steady-state CFD analysis. One of the most important components, the Reynolds-averaged Navier-Stokes solver, is described in detail. It originated from the Dawes solver with numerous enhancements. They include the use of the low speed pre-conditioned full Navier-Stokes equations, the addition of the Spalart-Allmaras turbulence model and an improvement of wall functions related with the turbulence model. The latest upwind scheme, AUSM, has been implemented too. The Dawes code has been rewritten into a multi-block solver for O, C, and H grids. This paper provides some examples to evaluate the effect of grid topology on the machine performance prediction.

Detached-Eddy Simulation of Flow Around the NREL Phase-VI Blade

2002 ◽  
Author(s):  
J. Johansen ◽  
N. N. So̸rensen ◽  
J. A. Michelsen ◽  
S. Schreck
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Simulation Model ◽  
Three Dimensional ◽  
Turbulence Models ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Reynolds Averaged Navier Stokes ◽  
Nrel Phase Vi

The Detached-Eddy Simulation model implemented in the computational fluid dynamics code, EllipSys3D, is applied on the flow around the NREL Phase-VI wind turbine blade. Results are presented for flow around a parked blade at fixed angle of attack and a blade pitching along the blade axis. Computed blade characteristics are compared with experimental data from the NREL/NASA Ames Phase-VI unsteady experiment. The Detached-Eddy Simulation model is a method for predicting turbulence in computational fluid dynamics computations, which combines a Reynolds Averaged Navier-Stokes method in the boundary layer with a Large Eddy Simulation in the free shear flow. The present study focuses on static and dynamic stall regions highly relevant for stall regulated wind turbines. Computations do predict force coefficients and pressure distributions fairly good and results using Detached-Eddy Simulation show considerably more three-dimensional flow structures compared to conventional two-equation Reynolds Averaged Navier-Stokes turbulence models, but no particular improvements are seen on the global blade characteristics.

Thermofluid Characteristics of Czochralski Melt Convection Using 3D URANS Computations

2019 ◽  
Vol 11 (6) ◽  
Author(s):  
Sudeep Verma ◽  
Anupam Dewan
Keyword(s):  
Turbulence Modeling ◽  
Three Dimensional ◽  
Comparative Assessment ◽  
Navier Stokes ◽  
Thermal Gradients ◽  
Melt Flow ◽  
Turbulent Characteristics ◽  
Eddy Structures ◽  
Rans Models ◽  
Reynolds Averaged Navier Stokes

Turbulent characteristics of Czochralski melt flow are presented using the unsteady Reynolds-averaged Navier–Stokes (URANS) turbulence modeling approach. Three-dimensional, transient computations were performed using the Launder and Sharma low-Re k-ε model and Menter shear stress transport (SST) k-ω model on an idealized Czochralski setup with counterrotating crystal and crucible. A comparative assessment is performed between these two Reynolds-averaged Navier–Stokes (RANS) models in capturing turbulent thermal and flow behaviors. It was observed that the SST k-ω model predicted a better resolution of the Czochralski melt flow capturing the near wall thermal gradients, resolving stronger convective flow at the melt free surface, deciphering more number of characteristics Czochralski recirculating cells along with predicting large number of coherent eddy structures and vortex cores distributed in the melt and hence a larger level of turbulent intensity in the Czochralski melt compared with that by Launder and Sharma low-Re k-ε model.

A three dimensional real gas Navier-Stokes method for unstructured meshes

1995 ◽  
Author(s):  
Michael Applebaum ◽  
Robert Walters ◽  
William McGrory
Keyword(s):  
Three Dimensional ◽  
Unstructured Meshes ◽  
Navier Stokes ◽  
Real Gas
Sign in / Sign up

Export Citation Format

Share Document