scholarly journals Effect of travel speed on seed spacing uniformity of corn seed meter

Author(s):  
Liu Quanwei ◽  
◽  
He Xiantao ◽  
Yang Li ◽  
Zhang Dongxing ◽  
...  
Keyword(s):  
Author(s):  
S. A. Badua ◽  
A. Sharda ◽  
R. Strasser ◽  
I. Ciampitti
Keyword(s):  

2020 ◽  
Vol 63 (5) ◽  
pp. 1349-1360
Author(s):  
Pan Xue ◽  
Yujun Hao ◽  
Wan Jiao ◽  
Jie Ren ◽  
Feifei Yang ◽  
...  

HighlightsThe instability of the seed release point in a seed-metering device is proved theoretically.A double-curved guiding groove at the seed-release point improves the seed-metering uniformity.A discrete element model was used to examine effects of the design parameters on the metering performance.The critical parameters for the double-curved guiding groove design were determined.Abstract. The instability of the seed release point in a seed-metering device is one of the main causes of the non-uniformity of seed spacing. To improve the seed spacing uniformity, a double-curved guiding groove (DGG) was designed based on the prerelease adaptive principle. The DGG was used at the seed release point of an existing high-speed precision soybean seed-metering device with a double-setting plate. The results showed that the prerelease curved surface of the DGG was capable of guiding seeds to be released at the same seed release point at all times, and the adaptive curved surface of the DGG prevented any changes in seed velocity caused by friction or collisions between seeds and the meter, thereby improving the seed spacing uniformity significantly. A discrete element model was developed and validated with laboratory tests. Through simulations using the model, the primary and secondary factors of the DGG impacting the qualified rate of seed metering (QRM) and the coefficient of variation of the seed spacing uniformity (CVU) were identified and were, in descending order, the spacing of prerelease (SPR), the starting position of prerelease (SPP), the inclination angle of the seed outlet (ASO), and the inclination angle of the receiving cup (ABR). Regression equations of the QRM and CVU with the two main impacting factors were then established. For a planter travel speed of 10 km h-1, the optimal SPR was 10 mm, and the optimal SPP was 40°, where the QRM was 100% and the CVU was 16.61%. When compared to seed metering without the DGG, the CVU was reduced by 2.55%, showing that the DGG significantly improved the uniformity of seed spacing. Keywords: Double-curved guiding groove, Discrete element method, Seed-metering device, Travel speed, Uniformity.


1982 ◽  
Vol 25 (6) ◽  
pp. 1516-1519 ◽  
Author(s):  
Paul J. Jasa ◽  
Elbert C. Dickey

2011 ◽  
Vol 27 (2) ◽  
pp. 177-183 ◽  
Author(s):  
M. F. Kocher ◽  
J. M. Coleman ◽  
J. A. Smith ◽  
S. D. Kachman
Keyword(s):  

2008 ◽  
Vol 24 (5) ◽  
pp. 581-586 ◽  
Author(s):  
C. L. Searle ◽  
M. F. Kocher ◽  
J. A. Smith ◽  
E. E. Blankenship
Keyword(s):  

2019 ◽  
Vol 2 (5) ◽  
Author(s):  
Ji-hua Hu ◽  
Jia-xian Liang

Interstation travel speed is an important indicator of the running state of hybrid Bus Rapid Transit and passenger experience. Due to the influence of road traffic, traffic lights and other factors, the interstation travel speeds are often some kind of multi-peak and it is difficult to use a single distribution to model them. In this paper, a Gaussian mixture model charactizing the interstation travel speed of hybrid BRT under a Bayesian framework is established. The parameters of the model are inferred using the Reversible-Jump Markov Chain Monte Carlo approach (RJMCMC), including the number of model components and the weight, mean and variance of each component. Then the model is applied to Guangzhou BRT, a kind of hybrid BRT. From the results, it can be observed that the model can very effectively describe the heterogeneous speed data among different inter-stations, and provide richer information usually not available from the traditional models, and the model also produces an excellent fit to each multimodal speed distribution curve of the inter-stations. The causes of different speed distribution can be identified through investigating the Internet map of GBRT, they are big road traffic and long traffic lights respectively, which always contribute to a main road crossing. So, the BRT lane should be elevated through the main road to decrease the complexity of the running state.


EUGENIA ◽  
2012 ◽  
Vol 18 (3) ◽  
Author(s):  
Vilma Victa Rikumahu ◽  
Jantje Pongoh ◽  
J. M. Paulus

ABSTRACT Research has been implemented as of July 2012, in the  BPSB Laboratory  of North Sulawesi Province i.e.: 1) to test the seed lacking in vigour during the Random Complete Design with three treatments of the various harvest ages, i.e. U1 (90 dasy), U2 (100 days) and U3 (110 days) treatments repeated four times; 2) in the greenhouse to see the amount of the normal, sprouts abnormal, seeds, hard seed and dead, shoot root ratio by using the Random Completed Design with two factors, respectively are : factorial in complete factors of the first different age harvest U1 (90 days), U2 (100 days) and U3 (110 days), the second factor granting of the water with different capacity P1 (3600 ml), P2 (2700 ml), P3 (1800 ml) and P4 (900 ml). Data analysis were found by the various analysis, however if there are different results, it would continue on the Smallest Significant Test. The results showed that, Electric Power Conductivity (EPC) affected by the age of harvest seed corn. The highest EPC at the harvest ages of 90 days and the lowest at 100 days and 110 days. It would be shown that the great value of EPC, the smallest amount of germination. There is no interaction between the age of abnormal seeds, hard seed die, shoot root ratio and high sprouts, but single factor treatment of harvest age and media planting humidity were significantly effected toward sprout normal, abnormal seed, hard seed die, shoot root ratio and high sprouts. Keywords : corn seed, harvest ages, humidity ABSTRAK   Penelitian dilaksanakan sejak bulan Juli 2012, penelitian pertama di Laboratorium Balai Penelitian dan Sertifikasi Benih (BPSB) Provinsi Sulawesi Utara, untuk menguji vigor benih menggunakan Rancangan Acak Lengkap dengan tiga perlakuan umur panen yang berbeda: U1 (90 Hari), U2 (100 Hari) dan U3 (110 hari) perlakuan diulang empat kali. Penelitian kedua di Rumah Kaca untuk melihat jumlah kecambah normal, abnormal, benih keras,benih mati dan nisbah pupus akar  menggunakan Rancangan Acak Lengkap disusun secara faktorial  dengan  2 faktor  masing-masing adalah : faktor pertama : Umur Panen yang berbeda, U1 (90 Hari), U2 (100 Hari) dan U3 (110 hari). faktor kedua pemberian air dengan kapasitas yang berbeda, P1 (3600 ml), P2 (2700 ml), P3 (1800 ml) dan P4 (900 ml). Data yang diperoleh menggunakan analisa ragam dan jika terdapat perbedaan perlakuan dilanjutkan dengan uji Beda Nyata Terkecil  (BNT). Hasil penelitian yang didapat adalah; Daya hantar listrik (DHL) dipengaruhi oleh umur panen benih jagung, DHL tertinggi pada umur panen 90 hari dan yang terendah umur panen 100 dan 110 hari. Hal ini menunjukan bahwa semakin besar nilai DHL semakin kecil jumlah perkecambahan. Tidak terdapat interaksi antara umur panen benih dan kelembaban media tanam terhadap jumlah kecambah normal, abnormal, benih keras, benih mati, nisbah pupus akar dan tinggi kecambah tetapi secara tunggal faktor perlakuan umur panen dan kelembaban media tanam berpengaruh nyata terhadap kecambah normal, abnormal, benih keras, benih mati, nisbah pupus akar dan tinggi kecambah. Kata kunci : benih jagung, umur panen, kelembaban


Sign in / Sign up

Export Citation Format

Share Document