Abstract
Highly dynamic machining forces can cause excessive and unstable vibrations when industrial robots are used to perform high-force operations such as milling and drilling. Implementing appropriate optimization and control strategies to suppress vibrations during robotic machining requires accurate models of the robot’s vibration response to the machining forces generated at its tool center point (TCP). The existing models of machining vibrations assume the linearity of the structural dynamics of the robotic arm. This assumption, considering the inherent nonlinearities in the robot’s revolute joints, may cause considerable inaccuracies in predicting the extent and stability of vibrations during the process. In this article, a single degree-of-freedom (SDOF) system with the nonlinear restoring force is used to model the vibration response of a KUKA machining robot at its TCP (i.e., machining tool-tip). The experimental identification of the restoring force shows that its damping and stiffness components can be approximated using cubic models. Subsequently, the higher-order frequency response functions (HFRFs) of the SDOF system are estimated experimentally, and the parameters of the SDOF system are identified by curve fitting the resulting HFRFs. The accuracy of the presented SDOF modeling approach in capturing the nonlinearity of the TCP vibration response is verified experimentally. It is shown that the identified models accurately predict the variation of the receptance of the nonlinear system in the vicinity of well-separated peaks, but nonlinear coupling around closely spaced peaks may cause inaccuracies in the prediction of system dynamics.
DAMAGE EVALUATION OF STRUCTURES BY PULSE RESPONSE ANALYSIS AND FINITE RESONANCE RESPONSE ANALYSIS : Single degree of freedom system with elasto-plastic restoring force characteristics
