Some chemical characteristics of mine drainage in Illinois

1980 ◽  
Author(s):  
L.G. Toler
Author(s):  
Maria José Rivera ◽  
Ana Teresa Luís ◽  
José Antonio Grande ◽  
Aguasanta Miguel Sarmiento ◽  
José Miguel Dávila ◽  
...  

Twenty-three water dams located in the Iberian Pyrite Belt were studied during March 2012 (early spring) in order to carry out an environmental assessment based on diatom communities and to define the relationships between these biological communities and the physico-chemical characteristics of the dam surface water. This is the first time that a diatom inventory has been done for dams affected by acid mine drainage (AMD) in the Spanish part of the Iberian Pyrite Belt (IPB). It was found that the pH was the main factor influencing the behaviour of the diatom communities. Then, using a dbRDA approach it was possible to organize the aggrupation of diatoms into four groups in response to the physico-chemical conditions of the ecosystem, especially pH: (1) Maris, Aac, Gos, Cmora (pH 2–3); (2) Andc, San, And, Dpin (pH 3–4.5); (3) Gran, Pleon, Oliv, Lagu, Chan, SilI, SilII, Joya, Gar, Agrio, Camp, Corum (pH 4.5–6); (4) Herr, Diq I, Diq II (pH 6–7). The obtained results confirmed the response of benthic diatom communities to changes in the physico-chemical characteristics of surface water, and helped to understand the role of diatoms as indicators of the degree of AMD contamination in those 23 dams. Special attention was given to those that have an acidophilic or acid-tolerant profile (pH 2–3 and pH 3–4.5) such as Pinnularia aljustrelica, Pinnularia acidophila, Pinnularia acoricola and Eunotia exigua, which are the two groups found in the most AMD contaminated dams.


2014 ◽  
Vol 33 (3) ◽  
pp. 287-288 ◽  
Author(s):  
Qiyan Feng ◽  
Ting Li ◽  
Bin Qian ◽  
Lai Zhou ◽  
Bo Gao ◽  
...  

2014 ◽  
Vol 33 (3) ◽  
pp. 276-286 ◽  
Author(s):  
Qiyan Feng ◽  
Ting Li ◽  
Bin Qian ◽  
Lai Zhou ◽  
Bo Gao ◽  
...  

Author(s):  
Aliyeh Seifi ◽  
Mahdieh Hosseinjanizadeh ◽  
Hojjatolah Ranjbar ◽  
Mehdi Honarmand

Abstract The present research focuses to investigate the relationship between spectral and chemical characteristics of water samples in Darrehzar mine. In order to reach this aim the chemical characteristics of water were measured through pH, electrical conductivity (EC) and inductively coupled plasma mass spectrometry (ICP-MS) analysis. Furthermore, the visible near infrared (VNIR) and shortwave infrared (SWIR) spectra of water samples were measured by Analytical Spectral Devices (ASD) FieldSpec3 spectroradiometer and the relationships between spectral and chemical characteristics of water samples were calculated. Results of the pH and EC measurements showed that water with high acidity and EC values which indicates presence of acid drainage was located inside the mine. High concentration of copper, sulfur and iron at the samples could be related to copper mineralization and association with acid mine drainage. Results of spectroscopy revealed that second absorption feature (AF2) magnitude correlated significantly with pH (−0.599), EC (0.611) (p < 0.1) and total trace elements plus sulfur (0.822) (p < 0.05). The significant correlation of the AF2 magnitude with concentrations of S (0.854), Pb (0.914), Ni (0.836), Mn (0.834), Co (0.848) and AF3 with concentration of Fe (0.886) confirm that absorption feature magnitude increases by increasing metals concentrations in water.


2013 ◽  
Vol 7 ◽  
pp. 284-287 ◽  
Author(s):  
Lucía Santa Cruz ◽  
Antonio Garralón ◽  
Alicia Escribano ◽  
Paloma Gómez ◽  
Maria Jesús Turrero ◽  
...  

Author(s):  
C. Goessens ◽  
D. Schryvers ◽  
J. Van Landuyt ◽  
A. Verbeeck ◽  
R. De Keyzer

Silver halide grains (AgX, X=Cl,Br,I) are commonly recognized as important entities in photographic applications. Depending on the preparation specifications one can grow cubic, octahedral, tabular a.o. morphologies, each with its own physical and chemical characteristics. In the present study crystallographic defects introduced by the mixing of 5-20% iodide in a growing AgBr tabular grain are investigated. X-ray diffractometry reveals the existence of a homogeneous Ag(Br1-xIx) region, expected to be formed around the AgBr kernel. In fig. 1 a two-beam BF image, taken at T≈100 K to diminish radiation damage, of a triangular tabular grain is presented, clearly showing defect contrast fringes along four of the six directions; the remaining two sides show similar contrast under relevant diffraction conditions. The width of the central defect free region corresponds with the pure AgBr kernel grown before the mixing with I. The thickness of a given grain lies between 0.15 and 0.3 μm: as indicated in fig. 2 triangular (resp. hexagonal) grains exhibit an uneven (resp. even) number of twin interfaces (i.e., between + and - twin variants) parallel with the (111) surfaces. The thickness of the grains and the existence of the twin variants was confirmed from CTEM images of perpendicular cuts.


Author(s):  
Stephen Michell
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document