RIO TINTO 354.2

Alloy Digest ◽  
2021 ◽  
Vol 70 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Rio Tinto ◽  
Magnesium Casting ◽  
Permanent Mold Castings ◽  
Río Tinto

Abstract Rio Tinto 354.2 is a heat-treatable, aluminum-silicon-copper-magnesium casting alloy (3xx.x series). It is available in the form of ingots for remelting to be used for the production of sand and permanent mold castings. Alloy 354.0 was developed especially for premium engineered casting applications requiring high strength and elongation, and sound castings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting and heat treating. Filing Code: Al-479. Producer or source: Rio Tinto Limited.

RIO TINTO ALLOY 242.2

Alloy Digest ◽  
2020 ◽  
Vol 69 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Elevated Temperatures ◽  
High Strength ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Rio Tinto ◽  
Permanent Mold Castings ◽  
Río Tinto

Abstract Rio Tinto Alloy 242.2 is a heat-treatable, aluminum-copper-magnesium-nickel casting alloy. It is available in the form of ingots to be remelted for the manufacture of sand and permanent mold castings. Alloy 242.0 is used extensively for applications requiring high strength and hardness at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as casting, machining, and joining. Filing Code: Al-463. Producer or source: Rio Tinto Limited.

RIO TINTO ALLOYS 206.2, A206.2, B206.2

Alloy Digest ◽  
2020 ◽  
Vol 69 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Permanent Mold ◽  
Automotive Applications ◽  
Casting Alloys ◽  
Rio Tinto ◽  
Magnesium Casting ◽  
Permanent Mold Castings ◽  
Río Tinto

Abstract Rio Tinto Alloys 206.2, A206.2, and B206.2 are heat-treatable, aluminum-copper-magnesium casting alloys in ingot form for remelting. These alloys are primarily intended for producing sand and permanent mold castings for aerospace and automotive applications. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as casting, machining, and joining. Filing Code: Al-460. Producer or source: Rio Tinto Limited.

APEX 417

Alloy Digest ◽  
1958 ◽  
Vol 7 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Dimensional Stability ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Excellent Corrosion Resistance ◽  
Magnesium Casting ◽  
Strength And Ductility

Abstract APEX 417 is an aluminum-magnesium casting alloy having high strength and ductility, excellent corrosion resistance and good dimensional stability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-61. Producer or source: Apex Smelting Company.

RAFFMETAL EN AB-Al Si7Mg0.6 (EN AB-42200)

Alloy Digest ◽  
2021 ◽  
Vol 70 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Good Corrosion Resistance

Abstract Raffmetal EN AB-Al Si7Mg0.6 (EN AB-42200) is a heat-treatable, Al-Si-Mg casting alloy in ingot form for remelting. It is used extensively for producing sand, permanent mold, and investment castings for applications requiring a combination of excellent casting characteristics, high strength with good elongation, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-483. Producer or source: Raffmetal S.p.A.

ARCAST 67

Alloy Digest ◽  
1970 ◽  
Vol 19 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Artificial Aging ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Magnesium Casting

Abstract ARCASI 67 is an aluminum-zinc-magnesium casting alloy capable of developing high strength by artificial aging. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-197. Producer or source: Arwood Corporation.

RAFFMETAL EN AB-Al Si2MgTi (EN AB-41000)

Alloy Digest ◽  
2020 ◽  
Vol 69 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Alloy Casting ◽  
Good Corrosion Resistance ◽  
Shock Resistance ◽  
Permanent Mold Castings

Abstract Raffmetal EN AB-Al Si2MgTi is a heat-treatable, Al-Si-Mg-Mn-Ti casting alloy casting alloy in ingot form for remelting. It is used extensively for producing sand and permanent mold castings for applications requiring a combination of good strength and shock resistance, good corrosion resistance, and suitability for decorative anodizing and welding. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-467. Producer or Source: Raffmetal S.p.A.

ELEKTRON ZE63A

Alloy Digest ◽  
1973 ◽  
Vol 22 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Magnesium Casting

Abstract ELEKTRON ZE63A is a high-strength magnesium casting alloy having good foundry characteristics. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-71. Producer or source: Magnesium Elektron Inc..

RAFFMETAL EN AB-Al Si7Mg (EN AB-42000)

Alloy Digest ◽  
2021 ◽  
Vol 70 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Heat Treating ◽  
Magnesium Content ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Good Corrosion Resistance ◽  
Magnesium Casting ◽  
Wide Range ◽  
Permanent Mold Castings ◽  
Strength And Ductility

Abstract Raffmetal EN AB-Al Si7Mg (EN AB-42000) is a heat-treatable, aluminum-silicon-magnesium casting alloy in ingot form for remelting. It is used extensively for producing sand and permanent mold castings for applications requiring a combination of good strength and ductility, and good corrosion resistance. This alloy can be produced to a wide range of mechanical properties by making small adjustments to the magnesium content and/or heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-475. Producer or source: Raffmetal S.p.A.

RAFFMETAL EN AB-Al Cu4Ti (EN AB-21100)

Alloy Digest ◽  
2020 ◽  
Vol 69 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Temperature Performance ◽  
Permanent Mold Castings

Abstract Raffmetal EN AB-Al Cu4Ti is a heat-treatable, aluminum-copper-titanium casting alloy in ingot form for remelting. It is used extensively for producing sand and permanent mold castings for applications requiring high strength at temperatures up to 200 °C (390 °F). This alloy’s outstanding mechanical properties make it a viable alternative to steel for certain applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, machining, and joining. Filing Code: Al-464. Producer or source: Raffmetal S.p.A.

HI TENSILE

Alloy Digest ◽  
1959 ◽  
Vol 8 (10) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Magnesium Casting

Abstract HI TENSILE is an aluminum-zinc-magnesium casting alloy having high strength without heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-83. Producer or source: R. Lavin & Sons Inc..

Sign in / Sign up

Export Citation Format

Share Document