ANVAL ULTIMET

Alloy Digest ◽  
1998 ◽  
Vol 47 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
Tensile Properties ◽  
Base Alloy ◽  
Corrosion And Wear ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract Anval ULTIMET is a cobalt-base alloy designed to be used as plasma transfer arc (PTA) overlay where corrosion aggravates wear. This datasheet provides information on composition and tensile properties. It also includes information on corrosion and wear resistance as well as joining. Filing Code: CO-104. Producer or source: Anval Inc.

TRIBALOY ALLOY T-900

Alloy Digest ◽  
1996 ◽  
Vol 45 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
Crack Resistance ◽  
Base Alloy ◽  
Corrosion And Wear ◽  
Laves Phase ◽  
Preheat Temperature ◽  
Corrosion Resistant ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract Tribaloy alloy T-900 is a cobalt-base alloy derived from an alloy family originally developed by DuPont. Excessive amounts of molybdenum and silicon induce the formatin during solidification of a hard and corrosion-resistant intermetallic coumpound, known as Laves phase. This alloy had improved crack resistance and a lower preheat temperature compared with Tribaloy T-800 (Alloy Digest Co-99, September 1996). This datasheet provides information on composition, microstructure, and hardness. It also includes information on corrosion and wear resistance. Filing Code: CO-100. Producer or source: Stoody Deloro Stellite Inc.

STELLITE 3PM

Alloy Digest ◽  
1993 ◽  
Vol 42 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Powder Metal ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract STELLITE 3 PM (UNS R30103) is a cobalt-base alloy recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating, machining, joining, and powder metal forms. Filing Code: CO-90. Producer or source: Deloro Stellite Inc.

STELLITE 190 PM

Alloy Digest ◽  
1993 ◽  
Vol 42 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Powder Metal ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract STELLITE 190 PM is a cobalt-base alloy (14 wt% W) recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating, machining, joining, and powder metal forms. Filing Code: CO-94. Producer or source: Deloro Stellite Inc.

STELLITE 6PM

Alloy Digest ◽  
1993 ◽  
Vol 42 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Powder Metal ◽  
Stellite 6 ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract STELLITE 6 PM (UNS R30106) is a cobalt-base alloy recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating, machining, joining, and powder metal forms. Filing Code: CO-91. Producer or source: Deloro Stellite Inc.

STELLITE 98M2 PM

Alloy Digest ◽  
1993 ◽  
Vol 42 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract STELLITE 98M2 PM is a cobalt-base alloy (18.5 wt% W) recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating, machining, and joining. Filing Code: CO-88. Producer or source: Deloro Stellite Inc.

HAYNES STELLITE ALLOY No. 6B

Alloy Digest ◽  
1979 ◽  
Vol 28 (7) ◽  
Keyword(s):  
Wear Resistance ◽  
Base Alloy ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Screw Conveyor ◽  
Stellite Alloy ◽  
Cabot Corporation ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract HAYNES STELLITE Alloy No. 6B is a cobalt-base alloy that is highly resistant to most types of wear. It has long service life even under constant erosive conditions, and it exhibits high resistance to seizure and galling even without lubricants. Its corrosion resistance is good in a wide variety of media. Its many uses include scrapper blades, screw conveyor flights and sleeves for seawater pump shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep. It also includes information on high temperature performance, corrosion and wear resistance as well as heat treating, machining, and joining. Filing Code: Co-23. Producer or source: Stellite Division, Cabot Corporation. “Originally published September 1960, revised July 1979.”

STELLITE 19PM

Alloy Digest ◽  
2019 ◽  
Vol 68 (12) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract STELLITE 19 PM is a cobalt-base alloy recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating, machining, and joining. Filing Code: Co-87. Producer or source: Deloro Stellite Inc.. Originally published December 1993, corrected December 2019.

TRIBALOY 400

Alloy Digest ◽  
1975 ◽  
Vol 24 (7) ◽  
Keyword(s):  
Alloy Powder ◽  
Base Alloy ◽  
Intermetallic Phase ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Corrosive Media ◽  
Alloy Matrix ◽  
Cobalt Base Alloy ◽  
Plasma Sprayed ◽  
Cobalt Base

Abstract TRIBALOY 400 consists of a hard, intermetallic phase in a softer, cobalt-base alloy matrix. It can be cast or hardfaced. As alloy powder it can be plasma sprayed or blended with other powders for P/M (Powder/Metallurgy) processing. Uses include anti-wear surfaces and bearings or seals operating in corrosive media. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-72. Producer or source: Tribaloy Products.

CARPENTER ACUBE 100 ALLOY

Alloy Digest ◽  
2009 ◽  
Vol 58 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloys ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Beryllium Copper ◽  
Direct Replacement ◽  
Cobalt Base

Abstract Carpenter ACUBE 100 Alloy is cobalt-base and exhibits corrosion resistance and wear resistance. The alloy was designed as direct replacement of beryllium copper alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion and wear resistance as well as forming, heat treating, and machining. Filing Code: CO-117. Producer or source: Carpenter Specialty Alloys.

HOWMET No. 3

Alloy Digest ◽  
1968 ◽  
Vol 17 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Base Alloy ◽  
High Hardness ◽  
Heat Treating ◽  
High Heat ◽  
Cobalt Base Alloy ◽  
Metal Products ◽  
Cobalt Base

Abstract HOWMET No. 3 is a cobalt-base alloy having high hardness and compressive strength, high heat and corrosion resistance, along with excellent abrasion and wear resistance. It is recommended for bushings, scrapers, valve parts, and other machinery components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Co-56. Producer or source: Howmet Corporation Metal Products Division.

Sign in / Sign up

Export Citation Format

Share Document