HAYNES STELLITE ALLOY No. 6B

Alloy Digest ◽  
1979 ◽  
Vol 28 (7) ◽  
Keyword(s):  
Wear Resistance ◽  
Base Alloy ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Screw Conveyor ◽  
Stellite Alloy ◽  
Cabot Corporation ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract HAYNES STELLITE Alloy No. 6B is a cobalt-base alloy that is highly resistant to most types of wear. It has long service life even under constant erosive conditions, and it exhibits high resistance to seizure and galling even without lubricants. Its corrosion resistance is good in a wide variety of media. Its many uses include scrapper blades, screw conveyor flights and sleeves for seawater pump shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep. It also includes information on high temperature performance, corrosion and wear resistance as well as heat treating, machining, and joining. Filing Code: Co-23. Producer or source: Stellite Division, Cabot Corporation. “Originally published September 1960, revised July 1979.”

HAYNES STELLITE ALLOY No. 6K

Alloy Digest ◽  
1978 ◽  
Vol 27 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Base Alloy ◽  
Heat Treating ◽  
Metal Parts ◽  
Stellite Alloy ◽  
Cabot Corporation ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract HAYNES STELLITE alloy No. 6K is a cobalt-base alloy with outstanding resistance to most types of wear. Its wear resistance is a built-in characteristic and not the result of heat-treatment, plating, nitriding, or other methods used to produce a superficial hardness on metal parts. Among its many applications are cutting knives and blades for many materials, apple-paring knives in canneries and wear strips in conveyor channels. This datasheet provides information on composition, physical properties, elasticity, and compressive strength. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-20. Producer or source: Stellite Division, Cabot Corporation. Originally published May 1960, revised July 1978.

HAYNES STELLITE ALLOY No. 3

Alloy Digest ◽  
1961 ◽  
Vol 10 (8) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Base Alloy ◽  
High Hardness ◽  
Heat Treating ◽  
High Heat ◽  
Stellite Alloy ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract HAYNES STELLITE alloy No. 3 is a cobalt-base alloy having high hardness and compressive strength, high heat and corrosion resistance, along with excellent abrasion and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-29. Producer or source: Haynes Stellite Company.

HAYNES STELLITE ALLOY No. 12

Alloy Digest ◽  
1962 ◽  
Vol 11 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Base Alloy ◽  
Heat Treating ◽  
High Heat ◽  
Stellite Alloy ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract HAYNES STELLITE Alloy No. 12 is a cobalt-base alloy having high heat and corrosion resistance with excellent wear and abrasion resistance. It will withstand moderate shock and impact. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: Co-30. Producer or source: Haynes Stellite Company.

HAYNES ALLOY No. 36

Alloy Digest ◽  
1959 ◽  
Vol 8 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Jet Engine ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base ◽  
Haynes Alloy

Abstract HAYNES Alloy No. 36 is a cobalt-base alloy having excellent strength at temperatures up to 1800 deg. F. It is the cast modification of wrought HAYNES Alloy No. 25 and has been used successfully in jet engine blading and nozzle vanes. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-17. Producer or source: Haynes Stellite Company.

TRIBALOY ALLOY T-900

Alloy Digest ◽  
1996 ◽  
Vol 45 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
Crack Resistance ◽  
Base Alloy ◽  
Corrosion And Wear ◽  
Laves Phase ◽  
Preheat Temperature ◽  
Corrosion Resistant ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract Tribaloy alloy T-900 is a cobalt-base alloy derived from an alloy family originally developed by DuPont. Excessive amounts of molybdenum and silicon induce the formatin during solidification of a hard and corrosion-resistant intermetallic coumpound, known as Laves phase. This alloy had improved crack resistance and a lower preheat temperature compared with Tribaloy T-800 (Alloy Digest Co-99, September 1996). This datasheet provides information on composition, microstructure, and hardness. It also includes information on corrosion and wear resistance. Filing Code: CO-100. Producer or source: Stoody Deloro Stellite Inc.

HAYNES STELLITE ALLOY No. 98M2

Alloy Digest ◽  
1960 ◽  
Vol 9 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Physical Properties ◽  
Room Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
The Other ◽  
Stellite Alloy ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract HAYNES STELLITE 98M2 Alloy is a cobalt-base alloy having higher compressive strength and higher hardness than all the other cobalt-base alloys at room temperature and in the red heat range. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: Co-22. Producer or source: Haynes Stellite Company.

CARPENTER L-605 ALLOY

Alloy Digest ◽  
1987 ◽  
Vol 36 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base ◽  
Oxidation And Corrosion

Abstract CARPENTER L-605 alloy is a nonmagnetic cobalt-base alloy that has good oxidation and corrosion resistance and high strength at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-81. Producer or source: Carpenter.

TRIBALOY 400

Alloy Digest ◽  
1975 ◽  
Vol 24 (7) ◽  
Keyword(s):  
Alloy Powder ◽  
Base Alloy ◽  
Intermetallic Phase ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Corrosive Media ◽  
Alloy Matrix ◽  
Cobalt Base Alloy ◽  
Plasma Sprayed ◽  
Cobalt Base

Abstract TRIBALOY 400 consists of a hard, intermetallic phase in a softer, cobalt-base alloy matrix. It can be cast or hardfaced. As alloy powder it can be plasma sprayed or blended with other powders for P/M (Powder/Metallurgy) processing. Uses include anti-wear surfaces and bearings or seals operating in corrosive media. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-72. Producer or source: Tribaloy Products.

ESCO ALLOY 72

Alloy Digest ◽  
1966 ◽  
Vol 15 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Thermal Shock Resistance ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Corrosive Media ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Shock Resistance ◽  
Cobalt Base

Abstract ESCO Alloy 72 is a cobalt-base alloy having high corrosion, heat and thermal shock resistance. It is recommended for applications requiring good mechanical properties at elevated temperatures and/or in corrosive media. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Co-48. Producer or source: ESCO Corporation.

STELLITE 3PM

Alloy Digest ◽  
1993 ◽  
Vol 42 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Powder Metal ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract STELLITE 3 PM (UNS R30103) is a cobalt-base alloy recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating, machining, joining, and powder metal forms. Filing Code: CO-90. Producer or source: Deloro Stellite Inc.

Sign in / Sign up

Export Citation Format

Share Document