HIPERCO 50A

Alloy Digest ◽  
1999 ◽  
Vol 48 (11) ◽  
Keyword(s):  
Coercive Force ◽  
Direct Current ◽  
Core Loss ◽  
Heat Treating ◽  
Magnetic Saturation ◽  
Magnetic Alloy ◽  
Soft Magnetic ◽  
Iron Cobalt ◽  
Soft Magnetic Alloy ◽  
Maximum Permeability

Abstract Hiperco 50A is an iron-cobalt-vanadium soft magnetic alloy possessing high magnetic saturation, high direct current (dc) maximum permeability, low dc coercive force, and low alternating current (ac) core loss. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: CO-107. Producer or source: Carpenter.

METGLAS ALLOY 2605S-2

Alloy Digest ◽  
1982 ◽  
Vol 31 (4) ◽  
Keyword(s):  
Power Transformer ◽  
Core Loss ◽  
Heat Treating ◽  
Power Transformers ◽  
Magnetic Alloy ◽  
Soft Magnetic ◽  
Low Frequencies ◽  
Soft Magnetic Alloy ◽  
Improved Performance ◽  
Lower Temperature

Abstract METGLAS Alloy 2605S-2 is an amorphous iron-base soft magnetic alloy designed for extremely low core loss at distribution and power transformer frequencies and inductions. It offers improved performance over METGLAS Alloy 2605SC (Alloy Digest Fe-64, February 1982) at the higher operating temperatures (100 C) of these devices. Alloy 2605S-2 has a lower temperature coefficient of saturation than Alloy 2605SC. Applications include power transformers and other devices operating at low frequencies. This datasheet provides information on composition and physical properties. It also includes information on forming and heat treating. Filing Code: Fe-65. Producer or source: Allied Corporation, Metglass Products Department.

CARPENTER HYMU 80 ALLOY

Alloy Digest ◽  
1989 ◽  
Vol 38 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Initial Permeability ◽  
Hysteresis Loss ◽  
Magnetic Alloy ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy ◽  
Maximum Permeability

Abstract CARPENTER HyMu 80 alloy is an unoriented soft magnetic alloy with extremely high initial permeability as well as maximum permeability with minimum hysteresis loss. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ni-375. Producer or source: Carpenter.

METGLAS ALLOY 2605CO

Alloy Digest ◽  
1983 ◽  
Vol 32 (10) ◽  
Keyword(s):  
Core Loss ◽  
Heat Treating ◽  
Magnetic Alloy ◽  
Core Size ◽  
Soft Magnetic ◽  
Amorphous Iron ◽  
Soft Magnetic Alloy ◽  
Aerospace Applications ◽  
Saturation Induction ◽  
Low Weight

Abstract METGLAS Alloy 2605CO is an amorphous iron-base soft magnetic alloy. It has the highest saturation induction of any amorphous alloy commercially available, combined with very low core loss. It is the alloy of choice when low weight is as important as efficiency. It is particularly suited to 400 Hz aerospace applications where small core size is a requirement, and to pulse applications where maximum flux swing is desired. This datasheet provides information on composition and physical properties. It also includes information on forming and heat treating. Filing Code: Fe-69. Producer or source: Allied Corporation, Metglass Products Department.

DURAPERM

Alloy Digest ◽  
1966 ◽  
Vol 15 (7) ◽  
Keyword(s):  
Coercive Force ◽  
Physical Properties ◽  
Abrasion Resistance ◽  
Heat Treating ◽  
Magnetic Alloy ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy ◽  
Mechanical Hardness

Abstract Duraperm is a soft magnetic alloy which exhibits high mechanical hardness and abrasion resistance in combination with a very low coercive force. It is recommended for applications requiring flux from minimum magnetization forces. This datasheet provides information on composition and physical properties. It also includes information on heat treating. Filing Code: Fe-28. Producer or source: Precision Metals Division, Hamilton Watch Company.

PERMADUR V

Alloy Digest ◽  
1992 ◽  
Vol 41 (1) ◽  
Keyword(s):  
Coercive Force ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Magnetic Alloy ◽  
High Permeability ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy ◽  
Cobalt Iron ◽  
Specialty Metals

Abstract PERMENDUR V is a cobalt/iron/vanadium soft magnetic alloy. It has a high saturation flux density, low DC coercive force, high permeability at high inductions and a desirably low magnetostrictive coefficient. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating. Filing Code: Co-85. Producer or source: Spang Specialty Metals.

METGLAS ALLOY 2605S-3

Alloy Digest ◽  
1982 ◽  
Vol 31 (12) ◽  
Keyword(s):  
High Frequency ◽  
Core Loss ◽  
Heat Treating ◽  
Magnetic Alloy ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy ◽  
Saturation Induction ◽  
High Frequency Devices ◽  
Significant Size ◽  
Wide Operating

Abstract METGLAS Alloy 2605S-3 is an amorphous iron-base soft magnetic alloy that can be annealed to obtain a round B-H loop which results in very low core loss at high frequencies (>1kHz). Because of its high saturation induction relative to ferrites or permalloys, significant size reductions are possible in high-frequency devices by utilizing this alloy. Unlike ferrites, it is suitable for use over a wide operating temperature range without cracking or showing large drops in usable flux density. Its uses include numerous high-frequency devices. This datasheet provides information on composition and physical properties. It also includes information on forming and heat treating. Filing Code: Fe-68. Producer or source: Allied Corporation, Metglass Products Department.

HIPERCO 50

Alloy Digest ◽  
1967 ◽  
Vol 16 (1) ◽  
Keyword(s):  
Coercive Force ◽  
Heat Treating ◽  
Magnetic Alloy ◽  
High Flux ◽  
High Permeability ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy ◽  
Cobalt Iron ◽  
Westinghouse Electric Corporation ◽  
Westinghouse Electric

Abstract Hiperco 50 is a cobalt-iron-vanadium soft magnetic alloy for high flux levels. It has high permeability at high inductions and low d-c coercive force. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming and heat treating. Filing Code: Co-50. Producer or source: Westinghouse Electric Corporation.

ARMCO ORIENTED ELECTRICAL STEELS M-2, M-3, M-4, M-6

Alloy Digest ◽  
1988 ◽  
Vol 37 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Electrical Steel ◽  
Core Loss ◽  
Rolling Direction ◽  
Heat Treating ◽  
Advanced Materials ◽  
Magnetic Alloy ◽  
Soft Magnetic ◽  
Electrical Steels ◽  
Soft Magnetic Alloy

Abstract ARMCO ORIENTED ELECTRICAL STEEL, nominally an iron 4% silicon soft magnetic alloy is available in four grades designated M-2, M-3, M-4, M-6. They have a much lower core loss in the rolling direction than nonoriented grades. Their permeability is high even at high inductions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and surface treatment. Filing Code: Fe-84. Producer or source: Armco Advanced Materials Company.

METGLAS ALLOY 2605 SA1

Alloy Digest ◽  
2006 ◽  
Vol 55 (7) ◽  
Keyword(s):  
Physical Properties ◽  
High Frequency ◽  
Power Transformer ◽  
Core Loss ◽  
Heat Treating ◽  
Magnetic Alloy ◽  
Soft Magnetic ◽  
Current Transformers ◽  
Amorphous Iron ◽  
Soft Magnetic Alloy

Abstract Metglas 2605 SA1 is an amorphous iron-base soft magnetic alloy designed for extremely low core loss at distribution and power transformer frequencies and inductions. Applications include high-frequency inductors and current transformers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, forming, and heat treating. Filing Code: FE-139. Producer or source: Metglas Inc.

NILOMAG 77

Alloy Digest ◽  
1995 ◽  
Vol 44 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Initial Permeability ◽  
Magnetic Alloy ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy ◽  
High Level

Abstract NILOMAG ALLOY 77 is a 77 Ni soft magnetic alloy with a high level of initial permeability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating. Filing Code: Ni-488. Producer or source: Inco Alloys International Inc.

Sign in / Sign up

Export Citation Format

Share Document