JALCASE No. 7

Alloy Digest ◽  
1955 ◽  
Vol 4 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Properties ◽  
Heat Treating ◽  
Automatic Machine ◽  
Manganese Steel ◽  
High Production ◽  
Steel Corporation

Abstract JALCASE No. 7 is a tough, carbon-manganese steel characterized by its free-machining qualities. It is especially recommended for high production automatic machine products. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating and machining. Filing Code: CS-4. Producer or source: Jones & Laughlin Steel Corporation.

AISI C1144

Alloy Digest ◽  
1957 ◽  
Vol 6 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Automatic Machine ◽  
Manganese Steel ◽  
Bethlehem Steel Corporation ◽  
High Production ◽  
Steel Corporation

Abstract AISI C1144 is a tough, carbon-manganese steel characterized by its free-machining qualities. It is especially recommended for high production automatic machine products. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: CS-6. Producer or source: Bethlehem Steel Corporation.

AISI C1141

Alloy Digest ◽  
1960 ◽  
Vol 9 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Automatic Machine ◽  
Manganese Steel ◽  
Steel Mills ◽  
High Production

Abstract AISI C1141 is a tough, carbon-manganese steel characterized by its free-machining qualities. It is especially recommended for high production automatic machine products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-13. Producer or source: Carbon and alloy steel mills.

AISI C1137

Alloy Digest ◽  
1958 ◽  
Vol 7 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Automatic Machine ◽  
Manganese Steel ◽  
Steel Mills ◽  
High Production

Abstract AISI C1137 is a tough, carbon-manganese steel characterized by its free-machining qualities. It is especially recommended for high production automatic machine products. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating and machining. Filing Code: CS-7. Producer or source: Carbon and alloy steel mills.

RYCUT 40

Alloy Digest ◽  
1958 ◽  
Vol 7 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Automatic Machine ◽  
Molybdenum Alloy ◽  
High Production

Abstract RYCUT 40 is a leaded chromium-molybdenum alloy steel having high machinability rating. It is especially recommended for high production automatic machine products. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-69. Producer or source: Joseph T. Ryerson & Son Inc. (Distributor).

BETHLEHEM Cr-Mo-W

Alloy Digest ◽  
1957 ◽  
Vol 6 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Bethlehem Steel Corporation ◽  
Die Steel ◽  
Temperature Performance ◽  
Resistance To Wear ◽  
Steel Corporation

Abstract BETHLEHEM Cr-Mo-W is a general purpose hot work tool and die steel having excellent resistance to wear, shock, and drastic changes in temperature. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-57. Producer or source: Bethlehem Steel Corporation.

FINKL WF-XTRA

Alloy Digest ◽  
2000 ◽  
Vol 49 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Optimum Diameter ◽  
High Production ◽  
Operating Temperatures

Abstract Finkl WF-XTRA has high wear resistance while retaining moderate fracture toughness. The alloy is recommended for larger die blocks. The optimum diameter for hardenability is 838 mm (33 in.). It is appropriate for use in high-production hammers where die temperatures may be above average or in presses with moderately high operating temperatures. This datasheet provides information on composition, microstructure, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: TS-570. Producer or source: A. Finkl & Sons Company.

JALCASE No. 4

Alloy Digest ◽  
1956 ◽  
Vol 5 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Case Hardening ◽  
Low Carbon ◽  
Steel Corporation ◽  
Case Hardening Steel

Abstract JALCASE No. 4 is a low-carbon, free machining case-hardening steel, equivalent to AISI C-1117. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating and machining. Filing Code: CS-5. Producer or source: Jones & Laughlin Steel Corporation.

TOUGHTEM

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Steel ◽  
Steel Corporation ◽  
Forging Die

Abstract TOUGHTEM is a chromium-nickel-molybdenum, low-alloy, hot-work steel which has been developed especially for forging die-block applications. It has excellent through-hardening characteristics and good machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: TS-491. Producer or source: Uddeholm Steel Corporation.

BEARCAT

Alloy Digest ◽  
1954 ◽  
Vol 3 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Bethlehem Steel Corporation ◽  
Shock Resistance ◽  
Steel Corporation

Abstract BEARCAT is a chromium-molybdenum general-purpose air-hardening tool steel especially suited for uses where shock-resistance, hot-work properties and easy machining are important. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-20. Producer or source: Bethlehem Steel Corporation.

OMEGA

Alloy Digest ◽  
1955 ◽  
Vol 4 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Class Iii ◽  
Bethlehem Steel Corporation ◽  
Steel Corporation

Abstract OMEGA is a silicon-manganese shock-resisting tool steel recommended for repeated and severe impact service. This is an A.S.M. Class III-C tool steel (SAE Type S5.) This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-29. Producer or source: Bethlehem Steel Corporation.

Sign in / Sign up

Export Citation Format

Share Document