SAE 1078

Alloy Digest ◽  
1980 ◽  
Vol 29 (5) ◽  
Keyword(s):  
Carbon Steel ◽  
High Carbon Steel ◽  
High Surface ◽  
Surface Hardness ◽  
Heat Treating ◽  
Austenitizing Temperature ◽  
High Carbon ◽  
Agricultural Equipment ◽  
Steel Mills ◽  
Quenching And Tempering

Abstract SAE 1078 is high-carbon steel of low hardenability. It can be hardened by quenching from the austenitizing temperature into oil or water; care must be exercised to prevent cracking when quenching into water. This steel develops high surface hardness and a soft core on quenching and tempering lightly. It has good wear resistance. Its many uses include agricultural equipment, tools, springs and machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-83. Producer or source: Carbon steel mills.

UNS G10780

Alloy Digest ◽  
1985 ◽  
Vol 34 (5) ◽  
Keyword(s):  
Carbon Steel ◽  
High Surface ◽  
Surface Hardness ◽  
Heat Treating ◽  
Plain Carbon Steel ◽  
Austenitizing Temperature ◽  
High Carbon ◽  
High Carbon Content ◽  
Steel Mills ◽  
Quenching And Tempering

Abstract UNS No. G10780 is a plain carbon steel; it has low hardenability and a high carbon content (nominally 0.78%). It can be hardened by quenching into oil or water from the austenitizing temperature; care must be exercised to prevent cracking when quenching into water. This steel develops high surface hardness and a soft core on quenching and tempering lightly. It has good wear resistance. Its many uses include agricultural equipment, tools, springs, and machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-105. Producer or source: Carbon steel mills.

AISI 1086

Alloy Digest ◽  
1975 ◽  
Vol 24 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
High Surface ◽  
Surface Hardness ◽  
Heat Treating ◽  
High Carbon ◽  
Steel Mills ◽  
Quenching And Tempering

Abstract AISI 1086 is a high-carbon water of oil-hardening steel of low hardenability. It is used for music wire, tools springs, machinery parts and many other applications. It develops high surface hardness on quenching and tempering lightly and has good wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-57. Producer or source: Carbon steel mills.

UNS G10860

Alloy Digest ◽  
1986 ◽  
Vol 35 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
High Surface ◽  
Surface Hardness ◽  
Heat Treating ◽  
High Carbon ◽  
Good Resistance ◽  
Steel Mills ◽  
Resistance To Wear

Abstract UNS No. G10860 is a high-carbon oil or water-hardening steel of low hardenability. It develops high surface hardness on quenching rapidly and tempering lightly and it has good resistance to wear. It is used for tools, springs, music wire, machinery parts and many other applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-112. Producer or source: Carbon steel mills.

UNS G10600

Alloy Digest ◽  
1991 ◽  
Vol 40 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Carbon Steel ◽  
Heat Treating ◽  
High Carbon ◽  
Steel Mills

Abstract UNS No. G 10600 is a high-carbon steel of low hardenability. It may be used in the as-rolled, annealed, normalized or quenched and-tempered condition, depending on the desired properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-129. Producer or source: Carbon steel mills.

SAE 1060

Alloy Digest ◽  
1987 ◽  
Vol 36 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
High Carbon Steel ◽  
Heat Treating ◽  
Agricultural Machinery ◽  
High Carbon ◽  
Hand Tools ◽  
Steel Mills ◽  
Temperature Performance

Abstract SAE 1060 is a high-carbon steel of low hardenability; it may be used in the as-rolled, annealed, normalized or liquid-quenched-and-tempered condition, depending on the desired properties. It is normally hardened by austenitizing and quenching in oil; however, it may be quenched in water if precautions are taken to prevent cracking. Its many uses include springs, hand tools, heavy machinery parts, shafts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-116. Producer or source: Carbon steel mills.

AISI 1561

Alloy Digest ◽  
1982 ◽  
Vol 31 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
High Carbon Steel ◽  
Heat Treating ◽  
High Carbon ◽  
Hand Tools ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1561 is a high-carbon steel (nominally 0.61 carbon) containing 0.75-1.05% manganese. It has low hardenability and on austenitizing and liquid quenching it develops a hard surface with a soft, ductile core. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and tempered conditions for numerous applications. It has good machinability and good workability. Its many uses include springs, hand tools, shafts and machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-90. Producer or source: Carbon steel mills.

AISI 1060

Alloy Digest ◽  
1983 ◽  
Vol 32 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
High Carbon Steel ◽  
Heat Treating ◽  
Agricultural Machinery ◽  
High Carbon ◽  
Hand Tools ◽  
Steel Mills

Abstract AISI 1060 is a high-carbon steel of low hardenability; it may be used in the as-rolled, annealed, normalized or liquid-quenched-and-tempered condition, depending on the desired properties. It is normally hardened by austenitizing and quenching in oil; however, it may be quenched in water if precautions are taken to prevent cracking. Its many uses include springs, hand tools, heavy machinery parts, shafts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-92. Producer or source: Carbon steel mills.

AISI 1566

Alloy Digest ◽  
1984 ◽  
Vol 33 (2) ◽  
Keyword(s):  
Carbon Steel ◽  
Heat Treating ◽  
Agricultural Machinery ◽  
High Carbon ◽  
Hand Tools ◽  
Steel Mills ◽  
Wide Range ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1566 is a high-carbon (nominally 0.66% carbon) steel containing 0.85-0.15% manganese. Its hardenability is low and on austenitizing and liquid quenching it develops a hard (martensitic) surface with a soft, ductile core. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for a wide range of applications. It has good machinability and good workability. Its many uses include springs, shafts, hand tools, railway parts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-100. Producer or source: Carbon steel mills.

AISI 1070

Alloy Digest ◽  
1973 ◽  
Vol 22 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Machine Tools ◽  
Heat Treating ◽  
Spring Steel ◽  
High Carbon ◽  
Steel Mills

Abstract AISI 1070 is a high-carbon water or oil-hardening tool and spring steel of low hardenability. It is used for railroad and street railway rails, heavy machinery parts, shafts, springs and a wide variety of hand and machine tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-51. Producer or source: Carbon steel mills.

AISI 1065

Alloy Digest ◽  
1976 ◽  
Vol 25 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Machine Tools ◽  
Heat Treating ◽  
High Carbon ◽  
Hand Tools ◽  
Steel Mills

Abstract AISI 1065 is a high-carbon oil-hardening machinery and tool steel of low hardenability. It is used for springs, hand tools, machinery parts, shafts and many machine tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-63. Producer or source: Carbon steel mills.

Sign in / Sign up

Export Citation Format

Share Document