AISI 1566

Alloy Digest ◽  
1984 ◽  
Vol 33 (2) ◽  
Keyword(s):  
Carbon Steel ◽  
Heat Treating ◽  
Agricultural Machinery ◽  
High Carbon ◽  
Hand Tools ◽  
Steel Mills ◽  
Wide Range ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1566 is a high-carbon (nominally 0.66% carbon) steel containing 0.85-0.15% manganese. Its hardenability is low and on austenitizing and liquid quenching it develops a hard (martensitic) surface with a soft, ductile core. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for a wide range of applications. It has good machinability and good workability. Its many uses include springs, shafts, hand tools, railway parts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-100. Producer or source: Carbon steel mills.

AISI 1561

Alloy Digest ◽  
1982 ◽  
Vol 31 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
High Carbon Steel ◽  
Heat Treating ◽  
High Carbon ◽  
Hand Tools ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1561 is a high-carbon steel (nominally 0.61 carbon) containing 0.75-1.05% manganese. It has low hardenability and on austenitizing and liquid quenching it develops a hard surface with a soft, ductile core. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and tempered conditions for numerous applications. It has good machinability and good workability. Its many uses include springs, hand tools, shafts and machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-90. Producer or source: Carbon steel mills.

AISI 1551

Alloy Digest ◽  
1980 ◽  
Vol 29 (2) ◽  
Keyword(s):  
Carbon Steel ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Hand Tools ◽  
Medium Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1551 is a medium-carbon steel containing relatively high manganese (0.85-1.15%) for a carbon steel. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for numerous applications. It has a combination of good machinability and good workability. Its many uses include hand tools, machinery parts, springs and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-80. Producer or source: Carbon steel mills.

AISI 1548

Alloy Digest ◽  
1982 ◽  
Vol 31 (8) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
Hand Tools ◽  
Steel Mills ◽  
Wide Range ◽  
Automotive Parts ◽  
Cold Worked ◽  
Hot Rolled

Abstract AISI 1548 is a medium-carbon steel with a relatively high manganese content (1.10-1.40%). It can be used in a wide range of applications in the hot-rolled, normalized, annealed, cold-worked or liquid-quenched-and-tempered condition. It combines good machinability, with good workability. Among its many uses are automotive parts, farm machinery, shafts, hand tools and springs. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-89. Producer or source: Carbon steel mills.

AISI 1015

Alloy Digest ◽  
1972 ◽  
Vol 21 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Low Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1015 is a low-carbon steel used in the annealed, cold-worked, hot-rolled or normalized condition for general purpose construction and engineering. It is also used for case-hardened components. It combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-48. Producer or source: Carbon steel mills.

SAE 1060

Alloy Digest ◽  
1987 ◽  
Vol 36 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
High Carbon Steel ◽  
Heat Treating ◽  
Agricultural Machinery ◽  
High Carbon ◽  
Hand Tools ◽  
Steel Mills ◽  
Temperature Performance

Abstract SAE 1060 is a high-carbon steel of low hardenability; it may be used in the as-rolled, annealed, normalized or liquid-quenched-and-tempered condition, depending on the desired properties. It is normally hardened by austenitizing and quenching in oil; however, it may be quenched in water if precautions are taken to prevent cracking. Its many uses include springs, hand tools, heavy machinery parts, shafts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-116. Producer or source: Carbon steel mills.

AISI 1541

Alloy Digest ◽  
1978 ◽  
Vol 27 (9) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Steel Mills ◽  
Cold Worked ◽  
Increased Strength ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1541 is a medium-carbon steel containing relatively high manganese (1.35-1.65%). It is characterized by a combination of good machinability and good workability. It may be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for numerous applications. Its high manganese content provides increased hardenability which is reflected in increased strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-75. Producer or source: Carbon steel mills.

SAE 1015

Alloy Digest ◽  
1988 ◽  
Vol 37 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Low Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract SAE 1015 is a low-carbon steel used in the annealed, cold-worked, hot-rolled or normalized condition for general purpose construction and engineering. It is also used for case-hardened components. It combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-119. Producer or source: Carbon steel mills.

AISI 1526

Alloy Digest ◽  
1978 ◽  
Vol 27 (3) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Heat Treating ◽  
High Manganese ◽  
Medium Carbon ◽  
Steel Mills ◽  
Wide Range ◽  
Increased Strength ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1526 is a carbon steel containing relatively high manganese (1.10 to 1.40%) and low-to-medium carbon. It combines good machinability, good workability and good weldability. It may be used in hot-rolled, annealed, normalized or liquid quenched-and-tempered condition for a wide range of applications. Also, it may be case hardened by carburizing. Its high manganese content provides increased hardenability which is reflected in all uses and gives increased strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-71. Producer or source: Carbon steel mills.

UNS G10160

Alloy Digest ◽  
1985 ◽  
Vol 34 (8) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Low Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract UNS No. G10160 is a carburizing and general-purpose steel. It is a low-carbon steel that combines good machinability, good workability and good weldability. It is used for components case-hardened by carburizing. It is used in the hot-rolled, annealed, normalized or cold-worked condition for a variety of construction and engineering applications. It has a relatively high manganese content (0.60-0.90%) for a low-carbon steel; this provides increased hardenability which is reflected in all uses and gives increased hardness and strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-108. Producer or source: Carbon steel mills.

AISI 1060

Alloy Digest ◽  
1983 ◽  
Vol 32 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
High Carbon Steel ◽  
Heat Treating ◽  
Agricultural Machinery ◽  
High Carbon ◽  
Hand Tools ◽  
Steel Mills

Abstract AISI 1060 is a high-carbon steel of low hardenability; it may be used in the as-rolled, annealed, normalized or liquid-quenched-and-tempered condition, depending on the desired properties. It is normally hardened by austenitizing and quenching in oil; however, it may be quenched in water if precautions are taken to prevent cracking. Its many uses include springs, hand tools, heavy machinery parts, shafts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-92. Producer or source: Carbon steel mills.

Sign in / Sign up

Export Citation Format

Share Document